Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Vibration--Research"”.
-
Nonlinear oscillations of self-excited systems under multifrequency parametric excitation
A self·excited system with weak nonlinearities and multifrequency parametric excitation is investigated in this study. The method of multiple scales is used to analyze the system under four different resonances relating parametric excitation frequencies with the natural frequencies. In the first …
-
Active parametric control of beam transverse vibration
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 1987
-
The Linear DC Motor as a proof mass actuator for vibration suppression in large space structures
… that it provides the forces necessary to damp vibrations in a large flexible structure. The design is broken down into three steps where in each step, a feedback loop is placed around the actuator and/or the structure. The first loop is a motor compensation loop which effectively decouples the …
-
A planar comparison of actuators for vibration control of flexible structures
… These distributed parameter systems exhibit vibration characteristics such as low, closely spaced natural frequencies and light damping, which, when coupled with the stringent pointing accuracy and vibration control requirements imposed on these systems, bring about interesting control …
-
Effect of vibration on heat transfer from wires in parallel flow
… obtained when the wires were vibrated show that vibration in forced convection Increased heat transfer rate up to a certain value of flow Reynolds number after which the effect of vibration on heat transfer was negligible. The effect of amplitude and frequency on the Improvement of heat transfer …
-
Application of complex modal decomposition methods to dispersive media
"Complex orthogonal decomposition (COD) is applied to an experimental beam to extract the dispersive wave properties using response measurements. The beam is made of steel and is rectangular with a constant cross section. One end of the beam is free and is hung by a soft elastic cord. An impulse is …
-
Vibration localization and statistical energy analysis in coupled systems
An investigation of the effect of the coupling value and the structural perturbation parameter is conducted on coupled systems. The analysis of a coupled pendulums system results in the analytical expression of the natural frequencies of the system. The response of the system for harmonic …
-
Modal analysis of an acoustical cavity coupled to a rectangular membrane
Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 1984
-
Bed dynamics and heat transfer in shallow vibrated particulate beds
… 0.2. All experiments are at 25 hertz and at vibrational amplitudes affording peak accelerations between 2 and 7 times gravity. The study uses spherical glass beads of two densities and "Master Beads," nearly spherical particles of a crude, dense alumina, in size fractions from 63 to 707 …
-
Investigation of the dynamic behavior of soybean plants during cutting
… of potential profits despite extensive research of the problem. Previous efforts have tended to be concerned with the design and operating aspects of harvesting machinery rather than the dynamic characteristics of the plant. In contrast, this study focused on the dynamic behavior of …
-
Semi-active structural control systems with nonlinear actuator dynamics: Design, stability analysis, and experimental verification.
The dissertation presents the development and experimental validation of control laws that provide stable closed-loop behavior and good performance for semi-active control systems with nonlinear actuator dynamics. In particular, the work treats variable orifice hydraulic semi-active actuators …
-
Multiscale modeling of friction and wear for rubber-like materials
… with the Institute for Dynamics and Vibration Research at Leibniz Universität Hannover and CEAT Tyres Ltd. (Mumbai, India), friction and abrasion tests using rubber blocks and wheels are evaluated to calibrate and validate the presented wear analysis framework.
-
Reduction of void content in laminated composites by mechanical vibrations
… structure. There is evidence from previous research that mechanical vibrations applied during curing of a laminated composite can reduce the number of bubbles. Previous experiments provide guidelines for the exploration of vibrations as void eliminator in composites. This thesis reports …
-
Nonlinear dynamics of coupled electron-vibrational systems
We study coupled electron-vibrational condensed-matter systems. Of primary interest are many-electron effects in two types of systems: nano- and micromechanical semiconductor resonators and electrons on the surface of liquid helium. Both types of systems are well characterized and display rich and …
-
Measuring and modelling human response to foot-transmitted vibration exposure
Foot-transmitted vibration (FTV) occurs when a worker is exposed to vibration through the feet and can occur when operating vibrating equipment such as bolters, jumbo drills, or crushers, or standing to operate mobile equipment such as locomotives and forklifts. Exposure to FTV has been linked to …
-
Using shape memory alloys for adaptive vibration attenuation
Includes bibliographical references (pages 92-94).
-
Integrated modeling and control of flexible aircraft wings
Structural control for vibration reduction has important applications in many research areas, including the effect of earthquakes on buildings and aerodynamic forces on aircraft stability and performance. Both passive and active control techniques have been implemented, with the best solution …
-
Pipe detection and remote condition monitoring using an in-pipe excitation technique
… been studied within the Institute of Sound and Vibration Research within (ISVR) in the past 10 years. One technique involves excitation of the water pipe where it is accessible, normally from hydrant, followed by measuring the ground surface vibration, at the vicinity of suspecting pipe …
-
The Effects of a Tactile Display on First Responder Performance
… dangerous and difficult task. Simulation affords researchers and practitioners the ability to examine performance and training in adverse conditions while preserving life, offering repeatable scenarios, and reducing costs. Multiple Resource Theory is used in this study as a model for assessing …