Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 147 for “"Vibration--Testing"”.
-
Space Launch Environment and Vibration Testing
The pedigree of spacecraft dynamic load testing is through the one-axis-at-a-time; however, the launch vibration environment used to be a simultaneous six-axis, including three translational and three rotational. Literature suggests that the multi-axis environment induces different acceleration and …
-
Rapid, Approximate Multi-Axis Vibration Testing
Sequential single-axis vibration testing strategies often produce over-testing when qualifying system hardware. Multi-axis excitation techniques can simulate realistic service environments, but the hardware and testing strategies needed to do so tend to be costly and complex. Test engineers instead …
-
Seismic evaluation of Portage Creek Bridge based on ambient vibration testing
… Columbia, and as part of this goal, an ambient vibration test was carried out on the bridge in September 2014 in order to update/calibrate the finite element model of the bridge in SAP2000. The updated model was then used to assess the seismic performance of the bridge in accordance with the …
-
The Technique Of Determination Of Structural Parameters From Forced Vibration Testing
… of "useful" structural parameters from forced vibration testing. The implementation of this technique to full scale civil engineering structures was achieved by several developments in the experimental and computational fronts: a vibration generator and a computer-aided-testing system for the …
-
Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings
ABSTRACT Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings Erica Dawn Jacobsen The primary goal of the thesis was to detect the retrofit through vibration testing of both buildings. The secondary goal focused on correctly identifying the behavior of the building through …
-
Investigation of the semi-empirical method for force limited vibration testing
Conventional vibration testing of aerospace hardware is normally performed by controlling the acceleration input to the base of a test item to the specifications, namely the envelope of the acceleration peaks of the flight environment. In the nineties, NASA JPL led the development and …
-
An analysis of nonlinear damping and stiffness effects in force-limited random vibration testing
… damping nonlinearities on force-limited, random vibration test specifications are investigated. The response of the source-load vibratory system to a random, Gaussian excitation is analyzed using the modal- and residual-mass two degree-of-freedom system. The technique of statistical linearization …
-
Correlation Study of Stress Levels Produced in Vibration Testing to Finite Element Analysis Results
… if it is possible to bypass experimental testing of muffler guards. The muffler guard was chosen due to its common use on small engines and the ease at which it can be modeled. Data obtained from the stress tests on the muffler guard was then used as the parameters for the finite element …
-
Force limited vibration testing and subsequent redesign of the Naval Postgraduate School CubeSat launcher
… of carrying up to 24 CubeSats to orbit. The vibration test environment for CubeSats flying on NPSCuL on the Atlas-V is extremely harsh, partly due to the input vibration environment from the launch vehicle itself, and partly due to amplification from the NPSCuL structure. This thesis …
-
Virtual vibration testing of body and power unit mounted components (diesel engine EGR coolant rail)
… body and power unit mounted components, random vibration testing is carried out to original equipment manufacturer (OEM) specification which the components must survive without damage. With the current move to minimise design and development costs and time-scales in the development of new …
-
HARMONIC VIBRATION TESTING OF ELECTRONIC COMPONENTS ATTACHED TO PRINTED WIRING BOARDS WITH SAC305 AND EUTECTIC SnPb SOLDER
… tested at high and low load levels of harmonic vibration. Leadless chip resistors attached to printed wiring boards with conventional tin-lead solder and lead-free solders (SAC105 and SAC305, and tin-nickel-copper, SN100C) were tested at low levels of harmonic vibration. The tests were conducted …
-
Investigation of the C(2) parameter of force limited vibration testing for multiple degrees-of-freedom systems
The semi-empirical method of force-limited vibration testing is used in the aerospace industry to avoid over-testing. The semi-empirical method specifies the maximum interface force based on a single parameter, often referred to as C2, which is based on previous experience with similar structures. …
-
Development of CubeSat Vibration Testing Capabilities for the Naval Postgraduate School and Cal Poly San Luis Obispo
… such as NPS-SCAT, requires environmental testing to ensure not only the success of the mission, but also the safety of other CubeSats housed in the same deployer. This thesis will address the development of CubeSat vibration testing methodology at NPS, including subsystem testing, …
-
Experimental and Computational Investigation of a Highly Flexible Airframe Taxiing Over an Uneven Runway for Aircraft Vibration Testing
Ground Vibration Test (GVT) is an important phase of the development of new aircraft prototypes to experimentally determine the modal parameters of aircraft prototypes. These modal parameters are used to validate and update the finite element model of the aircraft for reliable predictions of their …
-
An Investigation of the Influence of Diaphragm Flexibility on Building Design Through a Comparison of Forced Vibration Testing and Computational Analysis
An assessment of the validity of idealizing a concrete diaphragm as rigid was performed through the modal analysis of three existing buildings. Modal analysis was performed both by physical experimentation and computational analysis. Experimental determination of the mode shapes shows that two of …
-
A Comparison and Evaluation of Different Dynamic Characterization Approaches for Bridges
… of the structures, while keeping testing efforts at a minimum. The three dynamic field test included Operational Modal Analysis, or ambient vibration testing, and controlled input vibration testing using an instrumented impact hammer and an electro-dynamic mass shaker. The two …
-
Vibration characteristics of single-family woodframe buildings
… of Canada and insufficient information on the vibration behaviour of Canadian woodframe buildings prompted this investigation of the dynamic behaviour of woodframe houses in Canada. The objectives of this thesis are to gain a better understanding of the dynamic characteristics of single-family …
-
The Effect of Load Stabilizer Selection on Load Shift Within Unit Loads
… were tested. Twenty unit loads for both vibration and impact testing were used, with 5 replications per load stabilizer. Container displacement and pallet-container displacement were measured, and the number of tares in the load stabilizer film, on the corners of the test units, after …
-
Dynamic system characterization and design using mechanical impedance representations
Vibration testing is a critical aspect in the qualification of fieldable hardware as dynamic environments are typically design drivers. However, it is difficult to provide representative boundary conditions for component testing and the presence of an ill-matched boundary condition can alter the …
-
Design and evaluation of multi-axis vibration shaker concepts
… in a field environment, and are used for vibration testing of elastic structures. Such vibration testing ensures the reliable performance of the final product; The objective of this research project, sponsored by the Army Research Lab (ARL), is the design and Finite Element evaluation of a …
Page 1 of 8