Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 242 for “"Vickers Hardness"”.

  1. Comparison Of Vickers Hardness Between Dental Ceramics And Hybrid Materials

    The study aims to compare Vickers hardness of five definitive crown materials in a controlled laboratory setting. Materials & Methods: Five specimens (15 x 12 x 1.5 mm) were obtained from each tested material: zirconia (Lava Ultimate), lithium disilicate (IPS e.max CAD), lithium silicate reinforced …

    umn Repository record for Comparison Of Vickers Hardness Between Dental Ceramics And Hybrid Materials (opens in a new tab)

  2. X-Ray Diffraction and Vickers Hardness Analyses of Nickel-Titanium Orthodontic Wires Before and After Clinical Use

    … of manufacturers' claims. X-ray diffraction and Vickers hardness data have been shown to corroborate the microstructural findings. Therefore, these techniques were used to examine a Ni-Ti wire for any possible structural change after a period of clinical use. Sixteen wires of 0.016 inch diameter …

    marquette Repository record for X-Ray Diffraction and Vickers Hardness Analyses of Nickel-Titanium Orthodontic Wires Before and After Clinical Use (opens in a new tab)

  3. TIME DEPENDENT CHANGES IN MICRO-HARDNESS OF BIOACTIVE CEMENTS

    … this study was to compare time dependent micro-hardness of several bioactive cement compositions as compared to that of non-bioactive cement, a conventional glass ionomer. Materials & Methods: Three bioactive materials Ceramir Crown & Bridge Cement (CCB), Mineral Trioxide Aggregate (MTA), …

    temple Repository record for TIME DEPENDENT CHANGES IN MICRO-HARDNESS OF BIOACTIVE CEMENTS (opens in a new tab)

  4. Relationships between MIBANT bend angles and selected material properties of pallet fasteners

    … (p > 0.209 and R² = 0.896) for staples. The Vickers hardness number and carbon content of pallet nails are related to material properties. Vickers hardness number was found to be linearly related to static yield strength(? > 0.0001 and R² = 0.835). Vickers hardness number was also related to …

    vt Repository record for Relationships between MIBANT bend angles and selected material properties of pallet fasteners (opens in a new tab)

  5. Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds

    … were evaluated through static tensile tests and hardness testing on cooled samples. Using this data, an assessment was performed to investigate the relationship between hardness and mechanical properties. For the alloys evaluated, empirical relationships were found between Vickers hardness and …

    vt Repository record for Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds (opens in a new tab)

  6. Studies on Sintering Silicon Carbide-Nanostructured Ferritic Alloy Composites for Nuclear Applications

    … microscopy (SEM), as well as density and Vickers hardness tests. Pure NFA, pure SiC, and their composites NFA-SiC with different compositions (2.5 vol% NFA-97.5 vol% SiC, 5 vol% NFA-95 vol% SiC, 97.5 vol% NFA-2.5 vol% SiC, and 95 vol% NFA-5 vol% SiC) were successfully sintered through SPS. …

    vt Repository record for Studies on Sintering Silicon Carbide-Nanostructured Ferritic Alloy Composites for Nuclear Applications (opens in a new tab)

  7. Effect Bioactive Material Have On Tooth Demineralization

    … of different restorative materials using Vickers Hardness (HV) test (microhardness) test and polarized light microscopy (PLM).

    uab Repository record for Effect Bioactive Material Have On Tooth Demineralization (opens in a new tab)

  8. Metallurgical Characterization of New Palladium-Containing CoCr and NiCr Alloys

    … study was to evaluate the microstructure and Vickers hardness of two new CoPdCr and one new NiPdCr alloy and compare them to traditional CoCr and NiCr alloys. Methods: The casting alloys investigated were: CoPdCr-A (Noble Crown NF, The Argen Corporation), CoPdCr-I (Callisto CP+, Ivoclar …

    marquette Repository record for Metallurgical Characterization of New Palladium-Containing CoCr and NiCr Alloys (opens in a new tab)

  9. Estudo de métodos de dopagem para obtenção e caracterização de óxido e carbeto de nióbio com cobre e sua aplicação em compósitos sinterizados (Cu-NbC)

    … The sintered composite was evaluated by XRD, Vickers hardness and density. Also, measurements were made of Vickers hardness, density by Archimedes, SEM, and EDS with mapping, in which good dispersion and homogenization of the phases were identified. The wet doped powders with 10% Cu, after …

    brazil-ufrn Repository record for Estudo de métodos de dopagem para obtenção e caracterização de óxido e carbeto de nióbio com cobre e sua aplicação em compósitos sinterizados (Cu-NbC) (opens in a new tab)

  10. As-deposited microstructure and tensile behavior of solid-state additive manufactured Ti–6Al–4V

    … and Energy Dispersive Spectroscopy (EDS). A Vickers hardness test measured the hardness of the AFS-D Ti64 deposition cross section. Quasi-static tensile experiments performed on as-built AFS-D Ti64 samples quantified the strength and ductility, and the results were compared to the data …

    alabama Repository record for As-deposited microstructure and tensile behavior of solid-state additive manufactured Ti–6Al–4V (opens in a new tab)

  11. Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds

    … properties were assessed by evaluating hardness and biaxial flexural strength (ASTM F-394) of the structures. Results showed 12% increase in hardness and 18% increase in biaxial flexural strength in structures doped with ZnO and SiO2, respectively. Further, simulated body fluid …

    ucf Repository record for Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds (opens in a new tab)

  12. Consolidation of Al-TiO₂ and Ti₃Al-Ai₂O₃ composite powders

    … sintering Al-TiO₂ composite powder at 1480°C. Vickers hardness of the composites increased with increasing densification and increased Ah03 ceramic phase content. Vickers hardness of ≤17.5GPa was achieved for the fully densified Ti₃Al-TiO-Al₂O₃ composite whereas Vickers hardness of ≤15GPa was …

    waikato-masters Repository record for Consolidation of Al-TiO₂ and Ti₃Al-Ai₂O₃ composite powders (opens in a new tab) Download file for Consolidation of Al-TiO₂ and Ti₃Al-Ai₂O₃ composite powders (opens in a new tab)

  13. Ablation Properties of HfC-SiC-WC Ultra-High Temperature Ceramics Produced by Pressureless Sintering

    … phase composition, morphology, microstructure, Vickers hardness, and bending strength. The relative density and the Vickers hardness increased from 89% to 97% and from 13.0 GPa to 18.4 GPa, respectively, when the WC content increased from 0 to 20 wt.%. A relatively high value of 480 MPa for the …

    unt Repository record for Ablation Properties of HfC-SiC-WC Ultra-High Temperature Ceramics Produced by Pressureless Sintering (opens in a new tab)

  14. Ultrasonic Processing of Aluminum 2139 and 7050

    … in a few seconds, which generally lowers the Vickers hardness due to coarsening or even dissolution of strengthening precipitates. Conversely, the new design increases the Vickers hardness by up to 30% over the initial hardness of approximately 63HV for aluminum 2139 and 83HV for aluminum …

    unt Repository record for Ultrasonic Processing of Aluminum 2139 and 7050 (opens in a new tab)

  15. Síntese e caracterização da liga de alta entropia AlCuCrFeMnZn produzida por CCyPD

    … with energy-dispersive X-ray spectroscopy (EDS), Vickers hardness (HV) and Rockwell C hardness (HRC), as well as electrochemical tests including open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization. The XRD results indicated the predominant …

    brazil-ufrn Repository record for Síntese e caracterização da liga de alta entropia AlCuCrFeMnZn produzida por CCyPD (opens in a new tab)

  16. Obtenção do carbeto de alta entropia (TiVTaNbW)C via moagem de alta energia

    … (FTIR), Spark Plasma Sintering (SPS), Vickers Hardness, Confocal Microscopy, and Pin-on-Disk tribological tests. XRD revealed characteristic carbide peaks, while SEM showed carbide regions and the surface element distribution. FTIR indicated typical metal-carbon bonding bands, and SPS …

    brazil-ufrn Repository record for Obtenção do carbeto de alta entropia (TiVTaNbW)C via moagem de alta energia (opens in a new tab)

  17. COMPARING THE MECHANICAL PROPERTIES OF CONVENTIONAL, MILLED, AND 3D-PRINTED OCCLUSAL SPLINT MATERIALS: AN IN VITRO STUDY

    … Flexural strength, flexural modulus and surface hardness were measured. The three-point flexure test was used for the determination of flexural strength and modulus values, while Vickers hardness and Shore D hardness were measured to determine surface hardness. Twenty specimens (n = 20) of each …

    marquette Repository record for COMPARING THE MECHANICAL PROPERTIES OF CONVENTIONAL, MILLED, AND 3D-PRINTED OCCLUSAL SPLINT MATERIALS: AN IN VITRO STUDY (opens in a new tab)

  18. The Effect of Tool Rotation Speed and Clamping on Deformation in Friction Stir Welded 6061-T6511 Aluminum Extrusions

    … were measured on the welded extrusions. The Vickers hardness of the weld nugget was measured. The effect of each parameter on weld distortion was discovered and the mechanism of this link was suggested.

    uno Repository record for The Effect of Tool Rotation Speed and Clamping on Deformation in Friction Stir Welded 6061-T6511 Aluminum Extrusions (opens in a new tab)

Page 1 of 13