Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Virtual Impactor"”.
-
The inline virtual impactor
A circumferential slot In-line Virtual Impactor (IVI) has been designed using Computational Fluid Dynamics (CFD) simulation tools and experimentally characterized using monodispersed liquid aerosols to validate simulation results. The base design, IVI-100, has an application as a pre-separator for …
-
Improving Virtual Impactor Performance via Nozzle Optimization
Virtual impactors are aerosol-concentrating devices composed of a nozzle and downstream receiving tube. The majority aerosol flow accelerated through the nozzle is diverted from transmitting through the receiving tube, yet particles inertially maintain trajectory into the tube, thereby increasing …
-
A circumferential slot virtual impactor for bioaerosol concentration
A virtual impactor aerosol concentrator with a circumferential inlet slot has been built and tested. Circumferential slot virtual impactors (CSVIs) have low pressure losses, similar to linear slot impactors, but without particle losses due to end effects. The CSVI was designed using the results …
-
FLUID AND PARTICLE DYNAMICS IN AN AEROSOL VIRTUAL IMPACTOR
… volume aerosol sampling device known as the "virtual impactor". A steady state, three dimensional RANS type calculation is done using the FLUENT(TM) computational fluid dynamics code to predict the turbulent flow field inside the device. Particle collection efficiency and wall losses are then …
-
A two-stage circumferential slot virtual impactor for bioaerosol concentration
Slot virtual impactors provide an efficient low power method of concentrating aerosols. A circumferential slot virtual impactor (CSVI) is especially effective because it has a continuous slot, and, therefore, has no losses associated with the ends of the slot. A CSVI can also fit a longer slot in a …
-
Multi-stage linear slot virtual impactor for concentration of bioaerosols
Two linear slot virtual impactor arrangements were developed and investigated in this study. Both arrangements encompassed two-stage impaction for concentration of bioaerosols. The first arrangement consisted of eight linear slot impactors in parallel for the first stage with the designed …
-
Two-stage and Three-stage Virtual Impactor System for Bioaerosol Concentration
The Circumferential Slot Virtual Impactor (CSVI) and The XMX/2A are two virtual impactors designed for sampling aerosol particles from a dilute environment by separating the aerosol into a fine and a coarse particle fraction. Dust particles in the ambient air may deposit within the virtual …
-
A two-stage 100 l/min circumferential slot virtual impactor system for bioaerosol concentration
A two -stage circumferential slot virtual impactor aerosol concentrator system has been developed that is designed for nominal operational conditions of a 2 μm AD cutpoint, an aerosol inflow to the first stage of 100 L/min and a minor flow rate from the second stage of 1 L/min. Each unit was tested …
-
A computational fluid dynamics approach to analyze the virtual impactor in pneumatic aerosol jet printing
… The pneumatic aerosol jet printing technology’s virtual impactor is the focus of this study. In this technology, high velocity nitrogen gas aerosolizes various inks in the atomizer. The aerosolized stream of ink is then transported to a virtual impactor (VI) to become dense and concentrated as it …
-
Solid particle transport behavior and the effect of aerosol mass loading on performance of a slit virtual impactor
Transport of solid particles in a slit virtual impactor has been analyzed using visualization techniques. Particle trajectories were observed using laser-induced fluorescence of monodisperse particles seeded in the virtual impactor flow. It was observed from these trajectories that for smaller …
-
Two linear slot nozzle virtual impactors for concentration of bioaerosols
… configurations of linear slot nozzle virtual impactors were constructed and experimentally investigated for use as bioaerosol concentrators. In one configuration, the Linear Slot Virtual Impactor (LSVI), the nozzle was a straight slot having a length of 89 mm (3.5"). In the second …
-
Computational Fluid Dynamics (CFD) simulations of dilute fluid-particle flows in aerosol concentrators
… used as a tool to optimize the performance of a virtual impactor prototype. Suggestions on critical geometrical details available in the literature, for a virtual impactor, were numerically investigated on the prototype and the optimum set of parameters was determined. Performance curves were …
-
Study of formation and convective transport of aerosols using optical diagnostic technique
… transport behavior of solid particles in virtual impactor (VI). The objective of part I is to establish correlations which offer predictions on atomized particle size of HTFs which are widely and commonly used in process industries. There are numerous reports stating that mist explosions …
-
Ambient aerosol sampling inlet for flow rates of 100 and 400 l/min
… are called the IRI-100 (Inline Real Impactor) with an exhaust flow rate of 100 L/min, the IRI-400 (exhaust flow rate of 400 L/min), the IVI-300 (Inline Virtual Impactor for a flow rate of 300 L/min) and the IVI-400. These units were tested in a wind tunnel at speeds of 2, 8, and 24 …
-
Compositional Analysis Of Cloud Droplet Residuals By High Resolution Time-Of-Flight Aerosol Mass Spectrometry
… both clouds and ambient aerosol. The Counterflow Virtual Impactor (CVI) inlet allowed for the sampling of cloud droplet residuals when transecting clouds while the forward-facing isokinetic inlet was utilized to sample the ambient aerosol. This unique inlet set-up allowed for the classification of …
-
Understanding and optimizing transport of aerosol particles in indoor environments and aerosol concentrators.
… volume sampling. In this study one single nozzle impactor and three double nozzle impactors with varying nozzle distances were manufactured and then tested in an ASHRAE wind tunnel in order to test the limits of multinozzle design optimization. The third study focuses on optimizing intermediate …
-
Development of sampling system for particles in a human respiratory emission maximizing signal and minimizing background
… wind tunnel, a breathing cone and a 38-nozzle virtual impactor. Calibration of the system was initially carried out with just the equipment and a manikin and subsequently measurements of respiratory emission from human subjects were made. More specifically, the respiratory activities examined …
-
Comparison of airborne particulate exposure in two platinum refining process areas
… particulate samples. The first is a multi-stage virtual impactor, the Respicon, which was used to determine the three critical particle fractions (inhalable, thoracic and respirable). The NIOSH 7300 method determined the particle concentration and nickel percentage present in each fraction. Using …
-
On The Fluid Dynamics of Virtual Impaction and The Design of a Slit Aerosol Sampler
… jets, such as the ones feeding into a virtual impactor. Virtual impactors are popular, inexpensive aerosol collection devices capable of separating airborne solid particles. Recently they found increased application in areas that require concentration of dilute aerosols, such as …
-
Application of computational fluid dynamics to aerosol sampling and concentration
… devices including inlet components (impactors), cyclones, and virtual impactors. The ω − k model was used to predict particle behavior in Inline Cone Impactor (ICI) and Jet-in-Well impactor (JIW). Simulation provided excellent agreement with experimental test results for a compact …
Page 1 of 2