Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Visco-Plastic Self-Consistent"”.
-
Influence of Texture and Grain Size on the Plastic Anisotropy in a Wrought Mg Alloy: Synchrotron X-ray Diffraction and Visco-plastic Self-consistent Modeling
… by using synchrotron x-ray diffraction and visco-plastic self-consistent (VPSC) simulation methods.</p> <p>First, the influence of texture on Hall-Petch relationships (namely, critical resolved shear stresses and hardening parameters) in a Mg alloy was investigated to establish a …
-
Simulation of Mechanical Behaviour of Pure Titanium
… Among the numerical methods, Taylor type and self-consistent crystal plasticity models are two of the most common ones seen in literature. Simulation of some mechanical loading tests using visco-plastic self-consistent model was carried out and compared with the results given by Taylor type …
-
Crystal plasticity based modelling of the strain rate dependent mechanical behaviour of Ti‑6Al‑4V
Crystal plasticity models are a very valuable tool for the study of polycrystalline materials (and, notably, metals), due to their capacity to correlate the mechanical behaviour of the material with its microstructure. However, the complexity and high computational cost of these techniques make …
-
Multiaxial deformation of AZ80 magnesium alloy
… biaxial experimental tests and biaxial crystal plasticity simulations using a visco-plastic self-consistent (VPSC) formulation conducted on AZ80 magnesium alloy in two different conditions - extruded and a more weakly textured as cast condition. The experiments were conducted on tubular samples …
-
Deformation Mechanisms at Grain Boundaries in Polycrystal Plasticity
… The effect of boundary structure on the plastic deformation of metals is modeled by computing the aggregate response of composite grains in the visco-plastic self-consistent scheme. Assuming a planar boundary, the composite grain model accounts for the interaction between neighboring …
-
The deformation behaviour of a Mg-8Al-0.5Zn alloy
… mechanisms of the alloy. In addition, a visco-plastic self consistent (VPSC) model was used to predict the influence of initial texture and temperature on the deformation behaviour. The results show that temperature and loading direction with respect to initial texture has a pronounced …
-
Texture Control by Selective Deformation Mechanism Activation in Magnesium Alloy
… (and were supported by) the development of visco-plastic self-consistent crystal plasticity modeling predictions thanks to the efforts of my colleagues. This work will further the development of advanced manufacturing and design using wrought Mg alloys.
-
The evolution of microstructure during porthole die extrusion of Al-Mg-Si alloys and its effect on plastic deformation near the weld seam
… were conducted using a soft-coupled FEM/visco-plastic self-consistent (VPSC) approach. The results showed that the texture could be simulated up to 1.4 mm away from the weld seam using the thermomechanical history of the material as input. Closer than 1.4 mm, texture prediction is …
-
PHYSICS-BASED MODELING FRAMEWORK INCORPORATING MICROSTRUCTURAL EVOLUTION FOR PREDICTING DEFORMATION AND RECRYSTALLIZATION OF METALLIC MATERIALS
… to the development of a physics-based crystal plasticity model capable of accurately simulating both the mechanical shaping and heating portions of the process and their effect on the microstructure of the component. The well-established visco-plastic self-consistent polycrystal plasticity …
-
Lattice Strain and Texture Evolution During Room-Temperature Deformation in Zircaloy-2
… will allow an improved understanding of the plastic deformation of zirconium alloys, and the prediction of in-reactor deformation of tubes made by different manufacturing routes. Neutron diffraction was used to track the development of lattice strain and peak intensity in three dimensions for …
-
Inverse Optimization and Design of Thermo-Mechanical Processing Paths for Improved Formability of Mg Alloys
… to automatically derive ECAP routes from the plasticity properties of Mg alloys. The Visco-Plastic Self Consistent (VPSC) crystal plasticity model was used to simulate and predict mechanical properties and textures. New Optimization methods were used to calibrate the model with experimental …
-
Role of Crystallographic Texture and Grain Size on Low Temperature Deformation and Formability of a Mg Alloy
… of magnesium alloys, subjected to severe plastic deformation, for ultrahigh strength, ductility, and formability. Using a microstructure based visco-plastic self-consistent crystal plasticity model with detailed electron backscatter diffraction analyses and transmission electron …
-
Plastic Deformation and Work Hardening of Al and AA5754 Al Alloys
… and crystallographic texture developed during plastic flow in pure Al and continuous cast and direct chill cast AA5754 AI-Mg alloys. Tensile and strain rate sensitivity tests are performed in the temperature range 4.2K-295K; details of the process of dislocation accumulation, the dislocation …
-
Mechanical Flow Response and Anisotropy of Ultra-Fine Grained Magnesium and Zinc Alloys
… and theoretically, the effect os severe plastic deformation, ultrafine grain sizes, crystallographic textures and number of phases on the flow stress anisotropy and tension compression asymmetry, and the mechanisms responsible for these phenomena in two hcp materials: AZ31B Mg alloy …
-
DYNAMIC MECHANICAL BEHAVIOR OF MAGNESIUM ALLOYS UNDER SHOCK LOADING CONDITION
… using transmission electron microscopy. A visco-plastic self-consistent simulation was used to corroborate the experimental textures and possible deformation mechanisms. The dynamic mechanical behavior of cast AZ and AE magnesium alloys with different chemistries was investigated at strain …
-
Constitutive Modeling of Hexagonal Close Packed Polycrystals
… </p> <p> Based on this motivation, polycrystal plasticity theories that have been established and used to characterize aluminum and steel are studied. The validity of these theories is examined with respect to magnesium and its alloys. The magnesium system is composed of the hexagonal …