Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"Viscous friction"”.

  1. Load Carrying Capacity and Viscous Friction Losses of Oil Films in Hydrodynamically Lubricated Involute Spur Gears

    Made available in DSpace on 2014-12-09T17:13:30Z (GMT). No. of bitstreams: 1 6407157.pdf: 4741175 bytes, checksum: bb42de73b3975e80374b688dd772440b (MD5) Previous issue date: 1964

    uiuc Repository record for Load Carrying Capacity and Viscous Friction Losses of Oil Films in Hydrodynamically Lubricated Involute Spur Gears (opens in a new tab)

  2. Beam lift - a study of important parameters : (1) well bore orientation effects on liquid entry into the pump. (2) Pumping unit counterbalance effects on power usage. (3) Pump friction and the use of sinker bars.

    … pumping unit. Chapter 3 discusses the role of viscous friction in rod string design and the importance of sinker bars in counteracting compression forces at pump level. On the downstroke, the plunger must overcome any mechanical friction as well as the viscous friction from fluid flowing …

    texas Repository record for Beam lift - a study of important parameters : (1) well bore orientation effects on liquid entry into the pump. (2) Pumping unit counterbalance effects on power usage. (3) Pump friction and the use of sinker bars. (opens in a new tab)

  3. Fault simulator for proportional solenoid valves

    … of failure in spool valves is an increase in the friction between the spool and valve, due to wear, contamination and dirt, which renders the valve inoperable. In this research, a non-destructive fault simulator was developed which induced artificial friction faults in the PSV. The PSV consisted …

    sask Repository record for Fault simulator for proportional solenoid valves (opens in a new tab)

  4. Scattering of antiplane waves by fluid-filled cracks

    … fluid-filled cracks is investigated. The viscous friction effects are represented by appropriate boundary conditions on the crack faces. The cracks are randomly distributed in a slab of finite thickness. Taking configurational averages over all crack configurations, one finds that the …

    rice Repository record for Scattering of antiplane waves by fluid-filled cracks (opens in a new tab)

  5. Emulação dinâmica de fontes alternativas de energia utilizando um motor de indução

    … it is possible to emulate the inertia and the viscous friction of the energy source. As an application, the concept is realized for the emulation of wave energy con- verter of the type Heaving Point Absorber and for emulation of wind turbines. Simulation and experimental results are presented …

    brazil-uerj Repository record for Emulação dinâmica de fontes alternativas de energia utilizando um motor de indução (opens in a new tab)

  6. Similarity of a Wall Jet with Uniform External Stream and Downstream Suction

    … lacking in the inner region and is likely due to viscous friction at the wall hampering flow equilibrium. While the effect of downstream suction is negligible on the mean velocity profiles, the turbulent intensity profiles show that such suction reduces the turbulence level of the flow even far …

    nus Repository record for Similarity of a Wall Jet with Uniform External Stream and Downstream Suction (opens in a new tab) Download file for Similarity of a Wall Jet with Uniform External Stream and Downstream Suction (opens in a new tab)

  7. Mechanical Characteristics of Male Urethral Catheterization: Simulator and Cadaveric Donor Study

    … profile over rate-dependent effects such as viscous friction. In cadaveric studies, the average prostate region force was found to be higher than non-prostate region force. Average catheterization forces in simulators (8.1N) were roughly 45 percent higher than in donors (5.6N) when …

    umn Repository record for Mechanical Characteristics of Male Urethral Catheterization: Simulator and Cadaveric Donor Study (opens in a new tab)

  8. Experimental Study of Particle Motion on a Smooth and Rough Bed Under Shoaling Waves using Particle Image Velocimetry

    … respectively. Experimental data suggest that the friction force was greatly underestimated by using the coefficient of sliding or rolling friction which leads to an imbalance in the equation of motion. The imbalance in the equation of motions could not be explained by experimental uncertainties …

    sdstate Repository record for Experimental Study of Particle Motion on a Smooth and Rough Bed Under Shoaling Waves using Particle Image Velocimetry (opens in a new tab)

  9. Steady state response of a second order servo-mechanism with backlash and resilience in the gears between motor and load

    … input of a non-linear s ervomechani sm having viscous friction and a load position unity feedback loop. A gear train with "backlash between resilient gear teeth was located between the motor and load. The physical equations describing the system are presented and adapted to a form for the …

    nps Repository record for Steady state response of a second order servo-mechanism with backlash and resilience in the gears between motor and load (opens in a new tab)

  10. MODELLING & COMPENSATION OF PIVOT FRICTION IN A DISK DRIVE ACTUATOR

    … in drive capacity and reduction in form factors, friction in the disk drive actuator pivot is becoming a significant problem. It results in unwanted overshoots, large settling times and steady state errors during head positioning. In this thesis, a friction model consisting of Stiction, Coulomb …

    nus Repository record for MODELLING & COMPENSATION OF PIVOT FRICTION IN A DISK DRIVE ACTUATOR (opens in a new tab) Download file for MODELLING & COMPENSATION OF PIVOT FRICTION IN A DISK DRIVE ACTUATOR (opens in a new tab)

  11. An analytical and experimental investigation of a gas-dynamic technique for the continuous feeding of powdered solids to high-pressure vessels

    … allows the flows to be mathematically modeled as frictionless, one-dimensional flows of an ideal gas. Results from a parametric study show that the practical application of the gas-dynamic injector for the feeding of powdered coal to combustors operating at pressures on the order of 18 bar is …

    ut-knoxville Repository record for An analytical and experimental investigation of a gas-dynamic technique for the continuous feeding of powdered solids to high-pressure vessels (opens in a new tab)

  12. Investigation of a bending vibration absorber and, or damper for an internal combustion engine crankshaft

    … were invented in the course of the study. The viscous roller damper dissipated vibrational energy using viscous friction. An elastomer dissipated vibrational energy in a second design. Mathematical models of these absorber and, or damper designs were evaluated using the crankshaft model. The …

    ut-knoxville Repository record for Investigation of a bending vibration absorber and, or damper for an internal combustion engine crankshaft (opens in a new tab)

  13. The Effects of Spatial and Temporal Properties on a Viscoelastic Model of the Dyssynchronous Canine Heart

    … well as general muscle dynamics. Incorporating viscous influence into the model allowed for an expanded view when analyzing muscle parameter response to MD. A unique method of ventricle segmentation was introduced that allowed fast analysis of regional and global ventricular properties. This …

    ndsu Repository record for The Effects of Spatial and Temporal Properties on a Viscoelastic Model of the Dyssynchronous Canine Heart (opens in a new tab)

  14. The use of ultra-high pressure liquid chromatography in high-throughput pharmaceutical separations

    … (UHPLC) can lead to thermal broadening due to viscous friction. The use of superficially porous particles and still-air thermal environments can help reduce this broadening, which is especially important in applications requiring high-throughput, isocratic separations, such as monograph methods …

    rowan Repository record for The use of ultra-high pressure liquid chromatography in high-throughput pharmaceutical separations (opens in a new tab)

  15. Friction in instruments

    Friction is defined as a force acting against the direction of motion and resulting in a dissipation of energy in an irreversible manner. The only frictionless motions in nature exist if particles or bodies move on a selected geodesic curve (a geodesic curve is a curve in which there are no forces …

    bu Repository record for Friction in instruments (opens in a new tab)

  16. Optimal kinetic energy recovery algorithms for electric machines

    … are considered. Mechanical loads that include viscous friction, Coulomb friction, and aerodynamic drag are considered in the development of the algorithms. The trade-off between braking time and energy recovery is clearly illustrated and closed-form expressions for the optimal length of the …

    gatech Repository record for Optimal kinetic energy recovery algorithms for electric machines (opens in a new tab)

  17. Investigating the functionalisation of poly-ether-ether-ketone surfaces through the application of surface texturing for friction and wear control within all polymeric joint prosthesis

    … surface via laser ablation for the purpose of friction and wear control. Surface functionalisation was demonstrated by the manipulation of surface characteristics via texturing. Improving surface wettability characteristics showed that increasing surface hydrophilicity improved the surfaces’ …

    birmingham Download PDF for Investigating the functionalisation of poly-ether-ether-ketone surfaces through the application of surface texturing for friction and wear control within all polymeric joint prosthesis (opens in a new tab)

  18. Ultrasonic Droplet Generation Jetting Technology for Additive Manufacturing: An Initial Investigation

    … the system are significant, energy losses due to viscous friction within the nozzle may prove to be prohibitive. This thesis identifies and begins evaluation of many of the process variables, providing a strong basis for continued investigation of this technology.

    gatech Repository record for Ultrasonic Droplet Generation Jetting Technology for Additive Manufacturing: An Initial Investigation (opens in a new tab)

  19. Feasibility investigation of energy regenerative hybrid vehicle suspension system

    … system contains passive elements, namely a viscous damper and a spring. The damper converts vibration energy into heat energy-due to the viscous friction of fluid in the device, and is finally dissipated to the external environment. Other than damper configuration, the amount of energy …

    concordia Download PDF for Feasibility investigation of energy regenerative hybrid vehicle suspension system (opens in a new tab)

  20. Prediction of cutting forces at the tool tip using drive current for five-axis machines

    … addition to the torque required to overcome the friction and inertial motions. The accurate prediction of cutting forces from the motor current measurements requires the separation of the effects of cutting and inertial motion forces from the total motor current values. The transfer function …

    ubc Repository record for Prediction of cutting forces at the tool tip using drive current for five-axis machines (opens in a new tab) Download PDF for Prediction of cutting forces at the tool tip using drive current for five-axis machines (opens in a new tab)

Page 1 of 3