Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 446 for “"Vissim."”.
-
Vissim model development of a mid-block pedestrian crossing between signalized intersections
… a versatile transportation software package. VISSIM v3.70 was selected because of its ability to model individual vehicle and pedestrian interactions. The developed methodology provided a framework for model development at any pedestrian mid-block crossing through a case study. Input …
-
Calibration of VISSIM and QuickZone programs for work zone traffic impact analysis
… wide use, this study calibrated and validated VISSIM and QuickZone work zone models. The calibration was demonstrated using two case studies: a long-term work zone located on I-44, and a short-term work zone located on I-70. Both work zones involved one lane closure on a three-lane freeway. The …
-
Developing a procedure to identify parameters for calibration of a vissim model
… and select those which should be examined for a VISSIM model. The proposed iterative procedure consists of four phases: initial parameter selection, measures of effectiveness selection, Monte Carlo experiment, and sensitivity analysis and parameter elimination. The goal of the procedure is to …
-
Calibration and Comparison of the VISSIM and INTEGRATION Microscopic Traffic Simulation Models
… simulation software including: CORSIM, AIMSUN, VISSIM, PARAMICS and INTEGRATION and then compares the VISSIM and INTEGRATION software for the modeling of traffic signalized approaches. The thesis presents two papers. The first paper develops procedures for calibrating the steady-state component …
-
The Calibration, Validation, And Comparison Of Vissim Simulations Using The Two-fluid Model
The microscopic traffic simulation program VISSIM is a powerful tool that has been used by transportation engineers and urban planners around the world. A VISSIM simulation is meant to depict the performance of the physical road network through the use of modeling tools and behavioral parameters. …
-
Influência da chuva nos parãmetros de calibração do microssimulador de tráfego PTV VISSIM
Microssimuladores de tráfego como o PTV VIS SIM, objeto deste estudo, não possuem modelos específicos para simulação de tráfego sob diferentes condições climáticas, assumindo condições genéricas e estáveis. A possibilidade de simulações com chuva é de especial interesse a localidades onde a …
-
A Comparative Analysis of Weaving Areas in HCM, TRANSIMS, CORSIM, VISSIM and INTEGRATION
… of the research is to evaluate TRANSIMS, CORSIM, VISSIM and INTEGRATION and compare them with Highway Capacity Manual, which adopts a traditional methodology for carrying out the operational analysis of a highway system. The statistics collected for the simulation runs include weaving speeds, …
-
Sensitivity analysis of VISSIM driver behavior parameters on simulation performance in a bottleneck scenario
VISSIM is a discrete, stochastic, time step based microscopic traffic flow simulation model that has become an increasingly popular traffic simulation tool throughout the world. Because of the relatively recent introduction of VISSIM, relatively little is known about the performance of the …
-
Comprehensive evaluation of the level of service (LOS) of south loop 289 using VISSIM
… is conducted through commercial software, VISSIM 4.10, a microscopic traffic simulation model. The research reveals that changing the ramp configuration from Diamond to the X pattern would significantly improve the level of service of the loop system without severe damage to the frontage …
-
Quantifying the Safety Effects of Access Management Using VISSIM and SSAM: A Case Study
… located in Lawrence, Kansas. This research used VISSIM 5.40 microsimulation software to model the existing conditions and three models with different levels of access management such as low, medium, and high. These models were based on the 23rd Street/ Kansas -10 located in Lawrence, Kansas in …
-
Developing freeway merging calibration techniques for analysis of ramp metering In Georgia through VISSIM simulation
Freeway merging VISSIM calibration techniques were developed for the analysis of ramp metering in Georgia. An analysis of VISSIM’s advanced merging and cooperative lane change settings was undertaken to determine their effects on merging behavior. Another analysis was performed to determine the …
-
Entry-lane capacity analysis of roundabouts in Texas using VISSIM, SIDRA, and the highway capacity manual
… entry-lane capacity. Capacity results from VISSIM are compared to the Highway Capacity Manual entry-lane capacity curve and results from SIDRA.
-
A performance analysis of a congested multimodal intersection using VISSIM: A case study of Åkareplatsen, Göteborg
… with tram-crossing traffic, a model created in VISSIM was analysed, calibrated and validated using 2024 traffic data. This study is limited to what is possible wihtin the bounds of VISSIM. The method primarily consisted of collecting traffic data in the field and official data, model calibration …
-
Modeling Microscopic Driver Behavior under Variable Speed Limits: A Driving Simulator and Integrated MATLAB-VISSIM Study
… the microscopic model is implemented within VISSIM (overriding the default car-following model) and utilized for a safety-mobility performance assessment of an incident-responsive VSL control algorithm implemented in a MATLAB COM interface. Examination of the multi-objective optimization …
-
Propuesta de mejora en los niveles de servicio del óvalo José quiñones empleando el software vissim 7.0
… con ayuda del software de microsimulación Vissim 7.0. Una vez creado, calibrado y validado el modelo de la situación actual en el software Vissim 7.0 se propondrán opciones de mejora que permitan tener una correcta canalización de los flujos que circulan por la intersección. Finalmente, se …
-
Propuesta de mejora del diseño vial del óvalo La Curva de Chorrillos validado con el software Vissim 9.0.
… microscópico que es simulado en el software Vissim 9.0. La construcción del modelo consiste en 4 fases. La primera, trata del análisis previo, que abarca desde la recolección de datos hasta el procesamiento en gabinete. Por un lado, la toma de medidas geométricas se realizó en un día de menor …
Page 1 of 23