Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 107 for “"Void Volume"”.
-
Investigation of a tracer diffusion model used in void volume determination in biologic tissue
… tissues suggests that their internal void spaces fall into two different size distributions: macrovoids, the spaces between large morphological entities of several y in size, and microvoids, the spaces between structural elements. A mathematical model proposed by Lake and Armeniades …
-
Development of Control Setup for a Material Testing Machine and Experimental Analysis of the Effect of Void Volume Fraction on the Strength of Recycled High-Density Polyethylene Material
… response and to measure the effect of void volume fraction (VVF) within the high-density polyethylene beams. Samples taken from different areas of the beams with varying VVF were tested and the effect of these voids was investigated for the purpose of determining the efficacy of …
-
Identification of a 40KD Protein Increased by HSV-2 Infection
… at pH. 8. The 40KD protein eluted in the void volume. The pH. of the void volume was increased to pH.9.5 and anion exchange chromatography at pH. 9.5 separated two 40KD polypeptides, one eluted in the void volume and was called the "VOID VOLUME 40"; the other was eluted from the columm and …
-
Experimental study of void formation in solder joints of flip-chip assemblies
Voids in solder bumps have been a critical reliability issue as electronic components continue to shrink in size. This dissertation addresses the formation of voids in solder joints of flip-chip assemblies. Specifically, experimental techniques have been developed to study how the heat flux …
-
Lyocell Fiber-Reinforced Cellulose Ester Composites - Surface and Consolidation Considerations, and Properties
… matrix particles adhering to the fiber surfaces. Void volume formation was mitigated to a small extent by the use of optimal consolidation conditions. Composites formed at moderate temperature (200 °C), low consolidation pressure (11.8 p.s.i.) and high consolidation time (13 min.) were found to …
-
Vacuum-Assisted Wet Shaping of Paper
… per unit dry weight by means of increasing their void volume per unit weight. In turn, high void volume can be attained by increasing the overall thickness of each ply through molding the paper into a three-dimensional ("mini-egg-crate") structure before drying it. This research investigates the …
-
Non-invasive characterization of bone tissue and modeling of bone at micron and sub-micron levels
… We investigate the effects of fiber orientation, void volume fraction and window size on the constitutive elastic response of such a beam network. We show that generally C1111 and C1212 values decrease with increasing window size, higher scattering angle, and higher void volume fraction. In …
-
The Synergistic Effects of Prepreg Humidity Exposure, Fabrication Pressure, and Hydraulic Fluid Absorption on Microstructure and Mechanical Properties of High-Performance Composite Laminates
… laminates. Process-induced defects, such as microvoids, however remain a critical concern and are often formed by multiple variables simultaneously. The research presented in this dissertation examines two such processing conditions, the moisture content of prepreg sheets prior to laminate …
-
Studies of the Host Response and the Induction of Immunosuppression in Murine Malaria
… I (C), Peak I (G), and the sodium deoxycholate void volume all act as a vaccine against Plasmodium infection and are all without immunosuppressive activity as assayed by the plaque technique. Immunosuppressive activity was found in association with the sedimented parasite fragments (E), …
-
Investigation of the validity of using 3D printed teeth to replace human teeth for in-vitro endodontic research
… of obturation is the calculation of obturated volume of the root canal by microcomputed tomography (µCT). Human teeth are usually used for such analysis but the diversity in anatomy and the need of ethical approval limits their use. Human teeth with a particular anatomy can be 3-D printed with …
-
Simulation of random packing of hard spheres using Monte Carlo method
… done. The first case study measured the total void volume formed by the gaps of the neighboring spheres. It was found that the void volume occupied approximately 0.0017 per cent of the total volume. Therefore the use of the corrected diameter cannot be a factor. The second series of …
-
Detection and localization of damage in fiber reinforced polymer bars using acoustic emission detection, micro computed tomography, and scanning electron microscopy techniques
… for damage progression is the growth of voids entrapped in FRP rebars during their manufacture. These voids are a weakened region within the bars. When the bar is subjected to stress these regions can grow in size. In this work the growth of the voids within the bar is interpreted as the …
-
Impact of interconnect scaling on electromigration and stress migration reliability
… indicating the presence of a critical failure void volume, which depends on line geometry of the cathode end. FIB/SEM and TEM analyses revealed that copper out-diffusion due to defective barrier coverage caused lifetime degradation and line shorting. The threshold current densitylength (jL)c …
-
Investigations of potential mechanisms underlying spinal cord injury-induced polyuria.
… rats showed a significant increase in 24-hour void volume as well as significant changes in ANP and AVP like the T9 injury. There was also a significant decrease in AVP-labelled cells in the suprachiasmatic nucleus post-T9 and T3 contusion relative to controls. A reduction in void volume was …
-
Methane adsorption into sandstones and its role in gas recovery from depleted reservoirs
… parameters (pressure, contact time) and water on void volume of sandstone core samples. The average of the measured void volume using helium was 8.017cm3 for Bandera and 4.5171cm3 for the Scioto sandstones with a deviation of less than 0.002 cm3 and 0.001 cm3 indicating little dependence on …
-
Enhancing the Bond Strength of Hybrid Composite Structures by Design and Additive Manufacture of Substrate Surface Topologies
… FRP laminate, costly surface treatments can be avoided. This study investigates the effect of key parameters controlling bonding enhancement, including peak point spacing, void volume content and strut geometry with two different material systems for the substrate: metal and polymer. The first …
-
Apparent retention volume variation with flow rate change in high performance liquid chromatography
… dependency of the chromatographic zone retention volume with respect to migration within the empty capillary. This appears to be the result of superposition of asymmetric lateral diffusion and of the laminar flow profile. Although these effects have been studied on empty capillaries, in the …
-
Effects of process parameters and mold design on resin transfer molded composites.
… parameters on the mechanical properties and void content of the final parts. Increased injection rate is found to reduce both the strength and stiffness of the molded parts due to the formation of more voids behind the faster moving fluid front. At higher packing pressures, fewer voids and …
-
Comparing Boreal Forest Regeneration Structures Between Harvesting and Wildfire Disturbance with 3D Morphology
… with western sites exhibiting greater MASS, VOID-VOLUME, and VOID proportions and eastern sites showing greater CRUMB and CIRCUIT proportions (p < 0.05). Wildfire sites displayed greater structural consistency, whereas harvested sites showed higher variability. These findings indicate that …
-
Modelling the Flushing Mechanism of Thin Flexible Surface Pavements
… The research aimed to determine the effects of volumetric properties of chip seal surfaces on flushing, focusing on the relationship between air voids and flushing initiation. Additionally, the research aimed to develop a pavement deterioration model to predict the initiation and progression of …
Page 1 of 6