Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Voltage Decay"”.
-
Low humidity dark voltage decay phenomenon and ground plane study of photoconducting films
Includes bibliographical references.
-
Towards high-energy and high-power density lithium-rich cathode materials for future lithium-ion batteries: exploring and understanding mechanisms and role of transformation
… capacity loss, poor rate capability and voltage decay during electrochemical cycling. To conquer these critical issues, this study firstly focuses on exploring the mechanisms behind the voltage decay which is highly associated with inevitable phase transformation in local structure. To …
-
New design tools and characterization methods to study Polymer Electrolyte Membrane fuel cell degradation
… degradation, deconvolute the performance decay, and to analyze the locally occurring degradation. Carbon corrosion and platinum dissolution are the major degradation mechanisms during the operation. Start-up and shut-down (SU/SD) events where air purges through the hydrogen containing …
-
Electrochemical properties and ion-extraction mechanisms of Li-rich layered oxides and spinel oxides
… layered oxides suffer from declining operating voltage during cycling, and it is a huge challenge to employ them in practical cells. Raising the Ni oxidation state was found to reduce the voltage decay and improve the cyclability; however, it also decreased the discharge capacity. Increasing the …
-
Thermal modeling of supercapacitors and life degradation prediction of EV batteries using deep learning
… and identifies critical factors affecting voltage decay. The second phase uses deep learning to predict remaining useful life of energy storage systems. Using historical performance data and operational parameters, the neural network model employs Transformer and LSTM architectures to …
-
Charge Carrier Recombination Dynamics in Hybrid Metal Halide Perovskite Solar Cells
… electrical methods, more precisely Open-Circuit Voltage Decay (OCVD), Transient Photovoltage (TPV) and Charge Extraction (CE), were applied. Whereas OCVD and TPV provide information about the recombination lifetime, CE allows to access the charge carrier density at a specific illumination …
-
Advanced characterization of sic power devices before and after electrothermal stress
… used for power devices begin to reach voltage hold off and electric current conduction limits imposed by the very materials of which they are comprised, newer semiconducting materials with intrinsic material parameters better suited to higher voltage and current levels are being …
-
Sputtered Titanium Nitride Catalysts on Sulfur Hosts and Current Collectors for Lithium–Sulfur Batteries
… throughout extended cycling. An initial voltage decay was observed only in the TiN-modified MWCNT electrodes, after which the voltage profiles gradually stabilized over subsequent cycles, indicating an activation period associated with the TiN@MWCNT architecture. While PVD proved …
-
Controlling Charge Transport Across Cathode Interfaces for Enhanced Battery Stability
… to ensure stable ion transport in high-voltage batteries through electrolyte engineering and additive optimization. Chapter One provides an introduction and literature review, laying the foundation of the thesis. It highlights the cathodic interfacial challenges with the sulfide solid …
-
Lead sulfide quantum dot-based nanostructured solar cells
… solar cells was evaluated with standard current-voltage and incident-photon-to-collected-electron efficiency measurements, and physical parameters of the devices were characterised with frequency- and time-resolved techniques such as electrochemical impedance spectroscopy, intensity-modulated …
-
Fading phenomena in li-rich layered oxide material for lithium-ion batteries
… the battery fading phenomena (capacity fading/voltage decay) on further cycles are the major problems which have emerged. The Li<sup>+</sup> ion extraction accompanied by oxygen release from the active material in the form of oxide known as lithia (Li<sub>2</sub>O) along with the transition …
-
Modifications and studies of the anode catalyst layer for the direct formic acid fuel cell
… RHE. However, the standard palladium showed a decay of 60% when also measured at 0.3 V vs. RHE. It was also found that antimony doubles the rate of reaction in an electrochemical cell, but the increase is less in real fuel cell conditions. The current that is produced at 0.6 V is approximately …
-
Φωτοηλεκτροχημεία ηλεκτροαποθεμάτων Cd(Zn)Se: παρασκευή και χαρακτηρισμός φωτο-ηλεκτροδίων TiO2/CdSe
… photoelectrodes with the methods of Open Circuit Voltage Decay (OCVD) and Electrochemical Impedance Spectroscopy (EIS – Mott-Schottky). The experimental work of Part A includes a photovoltammetric study of the influence of various electrolytes on the CdSe surface properties (energy band edges), as …
-
Non-Contact Characterization of Dielectric Conduction on 4H-SiC
… from as-grown oxide films. Non-contact current-voltage (I-V) measurements of oxide on SiC were first demonstrated within this work and revealed that Fowler-Nordheim (F-N) current emission was the dominant conduction mechanism at high electric fields. Oxides on SiC were grown at atmospheric …
-
Development of Defect-Engineered Carbon Nitride and Tuned Cobalt-Based Materials for Photo- and Electrocatalytic Energy Conversion Reactions
… at 10 mA cm-2 and 337 mV at 100 mA cm-2, and a voltage decay rate of 0.37 mV h-1 at 100 mA cm-2, which is superior to the pristine sample and better than commercial RuO2. These findings highlight that OER catalyst design can be guided by tuning pre-catalyst composition to induce evolution toward …