Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 137 for “"Voltage Output"”.

  1. Effect of experimental parameters on the voltage output of a sediment microbial fuel cell

    … as with any type of microbial fuel cell, their voltage output is limited. Hence, in this study, tests were performed to determine parameters and conditions that can increase voltage production of SMFCs. SMFCs were built inside a 1.2 L cylindrical plastic box with two distinct layers, the …

    reykjavik Repository record for Effect of experimental parameters on the voltage output of a sediment microbial fuel cell (opens in a new tab)

  2. The Effect of Varying Environmental Conditions on the Performance of Triboelectric Generators

    … packaging distribution environments affect the voltage output of triboelectric energy generators. In order to study relative humidity and temperature effect on TENGs, we mount an optimized triboelectric generator to an electrodynamic shaker located inside an environmental chamber and measure …

    clemson Repository record for The Effect of Varying Environmental Conditions on the Performance of Triboelectric Generators (opens in a new tab)

  3. Development of a New Piezoelectric-based Energy Harvesting Pavement System

    … finite element models (FEMs). As a result, the voltage output from the PZ-EHPS specimen captured in the laboratory matched those estimated in the theoretical models. Considering that the PZ-EHPS segments will be paved in the field on a large scale, another series of finite element models at a …

    usf Repository record for Development of a New Piezoelectric-based Energy Harvesting Pavement System (opens in a new tab)

  4. A New DC UPS for DC Power Distribution System in Data Center

    … and cost. A new multi-port DC UPS with both high voltage output and low voltage output is proposed. When utility ac is available, it delivers power to the load through its high voltage output and charges the battery through its low voltage output. When utility ac is off, it boosts the low battery …

    queens Repository record for A New DC UPS for DC Power Distribution System in Data Center (opens in a new tab)

  5. Design of a neutral point clamped power inverter

    … class of inverters and has a three phase output connection and a neutral connection. The inverter is designed around insulated gate bipolar transistor as the power switching devices. The inverter employs software generation of the gate signals for the power switches and gate driver …

    ttu Repository record for Design of a neutral point clamped power inverter (opens in a new tab)

  6. Monolithic induction-sourced AC-to-DC power supply design

    … implanted devices. These applications require voltages in the range of 5 to 50 volts. Different kinds of voltage multiplier circuits were used to achieve high voltage output. The AC-to-DC and DC-to-DC capacitive bootstrap voltage multipliers are designed and analyzed. The AC-to-DC and DC-to-DC …

    njit Repository record for Monolithic induction-sourced AC-to-DC power supply design (opens in a new tab)

  7. Pulse mode light sensing using four-layer semiconductor structures and their application in neural networks

    … photodetectors produce a steady current or voltage output in response to incident light that depends on the intensity of the light beam. In contrast, biological vision systems produce a stream of pulses with pulse rate representing the amount of incident light power. The goal of this thesis …

    nps Repository record for Pulse mode light sensing using four-layer semiconductor structures and their application in neural networks (opens in a new tab)

  8. Design and Optimization of Nature-inspired Piezoelectric Generators: Fractal design

    … by industrial machines to produce an electrical voltage output through a piezoelectric material. The piezoelectric energy harvester can be used to power small Internet of Things (IoT) components, without need for an external battery or connecting cables. The optimization solutions are meant to …

    chalmers Repository record for Design and Optimization of Nature-inspired Piezoelectric Generators: Fractal design (opens in a new tab)

  9. Electromagnetic Thermoelectric Energy Harvesting Device

    … environmental electromagnetic waves to a voltage output without requiring additional energy source. A single cell of this thermoelectric-inspired broadband EMTE can generate a 19.50 nV output within a 7.2 µm square area, with a verified linear scalability of the output voltage through cell …

    washington Repository record for Electromagnetic Thermoelectric Energy Harvesting Device (opens in a new tab)

  10. Performance and Stability of Electron-Accepting Boron Subphthalocyanines in Organic Photovoltaics

    … hydrogens with chlorines is used to adjust the voltage output of OPVs, but the ability to tune the voltage output using pure BsubPc is quantized based on the number of peripheral positions. Mixtures of compounds with different degrees of peripheral chlorination were found to behave as electronic …

    toronto-retro Repository record for Performance and Stability of Electron-Accepting Boron Subphthalocyanines in Organic Photovoltaics (opens in a new tab)

  11. Autoregulation of Cortical Blood Flow in Response to Phenylephrine Induced Hypertension in the Normocapnic and Hypercapnic Cat

    … the relationship between local flow and voltage output from our thermoelectric flow probe by in vitro experiments with an artificial kidney. We measured local cortical blood flow in 17 cats during episodes of phenylephrine-induced hypertension, under conditions of normocapnia and, in some …

    loma-linda Repository record for Autoregulation of Cortical Blood Flow in Response to Phenylephrine Induced Hypertension in the Normocapnic and Hypercapnic Cat (opens in a new tab)

  12. Thermal Response of Lithium Tantalate for Temperature Measurement

    … reduce any extraneous effects on the sensor. The output signal of the lithium tantalate sensor was then amplified by using four different amplifying circuits and the voltage output was studied. The amplifying circuits included Current Mode, double Current Mode, Voltage Mode, and a modified Wien …

    usf Repository record for Thermal Response of Lithium Tantalate for Temperature Measurement (opens in a new tab)

  13. Development of graphene oxide based moist-electric generation device

    … intensive interest. However, the electric outputs of the most reported MEG devices are still low. Herein, we present a novel strategy of coupling graphene oxide (GO) based MEG device with the electrochemical cell (i.e., GO/galvanic MEG device) to boost power outputs. HCl and HNO3 acids are …

    unsw Repository record for Development of graphene oxide based moist-electric generation device (opens in a new tab)

  14. Development of a Direct-Measurement Thin-Film Heat Flux Array

    … were completed to determine the gage's output as well as its time response. In order to measure the signal from the HFA amplifiers were designed to increase the magnitude of the voltage output. An example case is given where the HFA is used in an experiment to correlate time-resolved …

    vt Repository record for Development of a Direct-Measurement Thin-Film Heat Flux Array (opens in a new tab)

  15. Overcoming Thermal Challenges to Acquire Absolute Pressure Measurements in Rotating Detonation Engines Using Piezoresistive Pressure Transducers

    … between (a) sensor temperature and 5th-wire voltage output and (a) sensor temperature and zero-offset voltage output. The sensor was implemented in recessed configuration into an RDE. Thermal compensation was effective after initial transients subsided, resulting in matching time-varying …

    alabama Repository record for Overcoming Thermal Challenges to Acquire Absolute Pressure Measurements in Rotating Detonation Engines Using Piezoresistive Pressure Transducers (opens in a new tab)

  16. Piezoelectric scaffolds for osteochondral defect repair

    … annealed PVDF-TrFE scaffolds have a higher voltage output compared to as-spun PVDF-TrFE scaffold. In bioreactor cultures, MSC chondrogenic differentiation is promoted on as-spun PVDF-TrFE and osteogenic differentiation is enhanced on annealed PVDF-TrFE scaffolds when compared to PCL control. …

    njit Repository record for Piezoelectric scaffolds for osteochondral defect repair (opens in a new tab)

  17. Determination of a Clinically Relevant Tissue Phantom for Transcutaneous Ultrasound Stimulation of Piezoelectric Discs for Current Density Applications

    … with ultrasound. By comparing the power and voltage output of the same PZT disc with different tissue phantoms the effect of the tissue phantom type on the ultrasound stimulation can be examined. Therefore, the different types of tissue phantoms attenuation and speed of sound difference can …

    ku Repository record for Determination of a Clinically Relevant Tissue Phantom for Transcutaneous Ultrasound Stimulation of Piezoelectric Discs for Current Density Applications (opens in a new tab)

  18. Performance of Self-excited Energy Harvesters with Tip Bodies of Non-circular Cross Section Shapes

    … are carried out in the wind tunnel to record the voltage output of the harvesters at different free stream velocities. The presence of the aeroelastic galloping instability was detected by the behavior of the transversal tip displacement of the harvester as well as the coupling of the motion and …

    cuny Repository record for Performance of Self-excited Energy Harvesters with Tip Bodies of Non-circular Cross Section Shapes (opens in a new tab)

  19. Tensionmeters for Measuring Moisture of a Peat Moss Casing Layer

    … less space requirements, and provides voltage output. Results indicated that both tensiometers can be used to monitor the moisture content during the drying period of the sphagnum peat moss casing layer within an acceptable approximation of the casing layer moisture content.

    sdstate Repository record for Tensionmeters for Measuring Moisture of a Peat Moss Casing Layer (opens in a new tab)

  20. Torque control of a separate excitation DC motor for a dynamometer

    … are predictably linear at a given armature voltage. Output torque of a separate-winding excitation DC motor is proportional to the armature current. From this theory, a program was written in Simulink with Xilinx embedded software to enable a user to command the DC motor torque through a …

    nps Repository record for Torque control of a separate excitation DC motor for a dynamometer (opens in a new tab)

Page 1 of 7