Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Voltage Regulator Modules"”.
-
Supercapacitor-based linear converter for voltage regulator modules
… converter technique suitable for microprocessor voltage regulator modules (VRMs). The original linear regulator is the patented supercapacitor assisted low-dropout regulator (SCALDO). A less complex, lower cost design was achieved by reducing the number of switches in the original SCALDO and …
-
Modeling and Design of Digitially Controlled Voltage Regulator Modules
… controllers will be increasingly used in low voltage, high-current and high frequency voltage regulator modules (VRMs) where conventional analog controllers are currently preferred because of the cost and performace reasons. However, there are still remaining two significant challenges for the …
-
Low Voltage Regulator Modules and Single Stage Front-end Converters
… microprocessors are being designed with lower voltage implementations. More devices will be packed on a single processor chip and the processors will operate at higher frequencies, exceeding 1GHz. New high-performance microprocessors may require from 40 to 80 watts of power for the CPU alone. …
-
Multiphase Voltage Regulator Modules with Magnetic Integration to Power Microprocessors
… (VLSI) technologies impose challenges for voltage regulator modules (VRM) to deliver high-quality power to modern microprocessors. As an enabling technology, multiphase converters have become the standard practice in VRM industry. The primary objectives of this dissertation are to develop …
-
Parasitic Component Analysis and Acoustic noise evaluation in Voltage Regulator Modules (VRMs)
Stable and regulated supply voltage has been an important topic of discussion in a consumer electronic products. Every chip and device requires specified voltages with small margins. Voltage regulated modulators (VRMs) have always been proven to provide a solution to this problem. Building a power …
-
Control and Modeling of High-Frequency Voltage Regulator Modules for Microprocessor Application
The future voltage regulator module (VRM) challenges of high bandwidth control with fast transient response, high current output, simple implementation, and efficient 48V solution are tackled in this dissertation. With the push for control bandwidth to meet design specifications for microprocessor …
-
Investigation of High-Input-Voltage Non-Isolated Voltage Regulator Modules Topology Candidates
… the 5V plane on the system board. A so-called Voltage Regulator Module (VRM), is put close to the processor in order to provide the power as quickly as possible. Nowadays, for desktop and workstation applications, VRM input voltage has moved to the 12V output of the silver box. In the meantime, …
-
Performance Improvements of Multi-Channel Interleaving Voltage Regulator Modules with Integrated Coupling Inductors
… necessitates that a dedicated converter, the voltage regulator module (VRM), be physically located very close to the processor in computer power systems. The efficiency and transient response specifications of the VRM place contradictory requirements on the inductance. This dissertation …
-
MOSFET Current Source Gate Drivers and Topologies for High Efficiency and High Frequency Voltage Regulator Modules
… the Moore’s law. As a result, the operating voltages of the future microprocessors follow the trend of decreasing (sub 1V) while the demanding currents increase (higher than 100A). Furthermore, the high slew rates during the transient will reach 1200 A/us. All these impose a serious challenge …
-
Chemical And Biological Treatment Of Mature Landfill Leachate
The challenges imposed on Voltage Regulator Modules (VRM) become difficult to be achieved with the conventional multiphase buck converter commonly used on PC motherboards. For faster data transfer, a decrease in the output voltage is needed. This decrease causes small duty cycle that is accompanied …
-
Investigations into design and control of power electronic systems for future microprocessor power supplies
Voltage Regulator Modules (VRMs) are used to provide power to the microprocessors. These modules are expected to deliver high currents upto 200A at low output voltages of around 1.2V. In order to reduce losses, microprocessors use dynamic voltage scaling, whereby the supply voltage to the …
-
Fast response controller for a stepping inductance based voltage regulator module
Voltage Regulator Modules (VRM) have stringent efficiency and transient response requirements. A promising Stepping Inductance based VRM (SI-VRM) has been proposed in the literature with the aim of achieving fast dynamic current response under step-load conditions. In the SI-VRM topology, the …
-
High performance control of VRM circuits
Voltage Regulator Modules (VRM), which are used to power advanced microprocessors, have stringent efficiency and transient response requirements. The multiphase buck converter topology is popularly used for such application, because of its ability to handle large load current and to achieve fast …
-
Novel Full Bridge Topologies for VRM Applications
Multi-phase Buck is widely used in Voltage Regulator Modules design because of its low cost and simplicity. But this topology also has a lot of drawbacks. One of the most fundamental drawback is that it has narrow duty cycles when it operates at high switching frequency with low output voltage (for …
-
Low-voltage High-efficiency Fast-transient Voltage regulator Module
… microprocessors are being designed with lower voltage implementations. The processor voltage supply in future generation processors will decrease to 1.1 V ~ 1.8V. More devices will be packed on a single processor chip, and processors will operate at higher frequencies, beyond 1GHz. Therefore, …
-
Merged Half-Bridge 48V/1V Voltage Regulator
… moving toward higher current and lower supply voltage, making the 48V point-of-load (PoL) voltage regulator increasingly important. Although the 48V bus reduces distribution loss, direct 48V-to-1V conversion remains challenging because the converter must simultaneously achieve a high step-down …
-
48V/1V Voltage Regulator for High-Performance Microprocessors
… improvements in system efficiency lies in the voltage regulator modules (VRMs), which grapple with challenges such as high conversion ratios, elevated output currents, and substantial load transients. These challenges are particularly pronounced for AI processors and graphics processing units …
-
Analysis and Optimization of the Two-Phase Series Capacitor Buck DC-DC Converter
… (2-pscB) was introduced to power laptops as low-voltage and high-current Voltage Regulator Modules (VRMs) as well as non-isolated Point-of-Load (PoL) converters. The current sharing concept is the main feature of this 2-pscB topology, where series capacitor voltage is used to achieve current …
-
High-density high-current fast-transient low-voltage DC-DC converters
… load current demands and forcing their operating voltages to drop to levels below one volt. Moreover, such load speeds ( operating frequency) are increasing at a fast pace, and they switch the current they draw with increasingly higher slew rates (faster) causing larger voltage deviation during …
-
E³ : energy-efficient EDGE architectures
… Most modern processors support a form of dynamic voltage and frequency scaling (DVFS) as a performance-power trade-off mechanism. Since the rate of voltage scaling has slowed significantly in recent process technologies, processor designers are in dire need of alternatives to DVFS. In this …
Page 1 of 2