Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Volume Content"”.

  1. Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation

    … polymers is directly correlated with the free volume content. Free volume arguments are indeed commonly used to explain the gas transport process. The gas transport properties of bisphenol-A polycarbonate films were examined as a function of the cooling rate, physical aging, and orientation. …

    vt Repository record for Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation (opens in a new tab)

  2. Testing of Remotely Controlled Soil Moisture Sensors and Analysis of Soil Moisture Data

    … 2006 to winter 2009 has been performed. Water volume content has been compared with the precipitation in the area, as well as the ground temperature has been compared with the air temperature in the same area. One sensor was located in an open field and the second sensor was located inside the …

    chalmers Repository record for Testing of Remotely Controlled Soil Moisture Sensors and Analysis of Soil Moisture Data (opens in a new tab)

  3. Investigation of the Selective Laser Melting of WC-Reinforced SS 316L Composites

    … research is to investigate the effects of the volume fraction of tungsten carbide (WC) and laser power on the processing, structure, properties, and mechanical performance of WC-reinforced SS 316L composite materials, additively manufactured via Selective Laser Melting (SLM) - the primary …

    tamu Repository record for Investigation of the Selective Laser Melting of WC-Reinforced SS 316L Composites (opens in a new tab)

  4. Improvement of bearing strength of laminated composites by nanoclay and Z-pin reinforcement.

    … increase being recorded w ith 8.4 phr nanoclay content in the DGEBA resin and a 50% increase with 20 phr nanoclay content in the TGDDM system. Carbon fibre reinforced laminates w ere prepared from nanoclay reinforced TGGDM matrix resin, using a vacuum assisted prepregging process. The bearing …

    unsw Repository record for Improvement of bearing strength of laminated composites by nanoclay and Z-pin reinforcement. (opens in a new tab)

  5. Monotonic and Cyclic Compression Behavior of Bulk Metallic Glasses

    … specimen size, cooling rate, and the free volume content on the monotonic and cyclic compression behavior of a Zr-based BMG was investigated. The smaller samples experienced a faster cooling rate, resulting in a higher free volume content. The smaller samples displayed superior monotonic …

    utk-theses Repository record for Monotonic and Cyclic Compression Behavior of Bulk Metallic Glasses (opens in a new tab)

  6. Manufacturing and Microstructural Modeling of Geometrically Complex Composite Components Produced by Bladder Assisted Composite Manufacturing (BACM)

    … 207 kPa (30 psi) to 621 kPa (90 psi). The fiber volume fraction, void content, mechanical properties, and energy consumed during the curing of the composite cylinders, are investigated and compared to traditional manufacturing techniques. The fiber volume fraction and the void content of the …

    oklahoma-thes Repository record for Manufacturing and Microstructural Modeling of Geometrically Complex Composite Components Produced by Bladder Assisted Composite Manufacturing (BACM) (opens in a new tab)

  7. Fibre Reinforcement for Shrinkage Crack Control in Prestressed, Precast Segmental Bridges

    … Tester. The parameters of study were the fibre volume content (0.5%, 1.0%, and 1.5%), the concrete compressive strength (50 and 80 MPa), and the fibre geometry and tensile strength. In addition to the experimental study, a model was developed to investigate the behaviour of a 1D restrained FRC …

    toronto-retro Repository record for Fibre Reinforcement for Shrinkage Crack Control in Prestressed, Precast Segmental Bridges (opens in a new tab)

  8. Temperature Effect on the Mechanical Properties of Steel Fiber Reinforced Ultra-High-Performance Concrete

    … under varying temperature and steel fiber volume content. The results indicate that both temperature and steel fibers have effect on the mechanical properties of UHPC. The flexural and compressive strength show an opposite trend of strength under the temperature variations. Effect on …

    utahstate Repository record for Temperature Effect on the Mechanical Properties of Steel Fiber Reinforced Ultra-High-Performance Concrete (opens in a new tab)

  9. Think Twice Before Hitting 'Send': The Strategic Uses of Information in Marketing Channels

    … as a sender's alteration of information volume, content, and/or timing to assist a receiver in processing information. Hypotheses are developed based on the normative perspective of communication from the organizational communication literature. Data from 244 salespeople are analyzed …

    wvu Repository record for Think Twice Before Hitting 'Send': The Strategic Uses of Information in Marketing Channels (opens in a new tab)

  10. Lyocell Fiber-Reinforced Cellulose Ester Composites - Surface and Consolidation Considerations, and Properties

    … particles adhering to the fiber surfaces. Void volume formation was mitigated to a small extent by the use of optimal consolidation conditions. Composites formed at moderate temperature (200 °C), low consolidation pressure (11.8 p.s.i.) and high consolidation time (13 min.) were found to have …

    vt Repository record for Lyocell Fiber-Reinforced Cellulose Ester Composites - Surface and Consolidation Considerations, and Properties (opens in a new tab)

  11. Mechanical Properties of Kenaf Composites Using Dynamic Mechanical Analysis

    … of 10 μm, and at room temperature. The fiber volume content of the kenaf was varied from 20%-40% in 5% increments. Ten samples of each fiber volume fraction were manufactured and tested. The flexural storage modulus, the flexural loss modulus, and the loss factor were reported. Generally as …

    utahstate Repository record for Mechanical Properties of Kenaf Composites Using Dynamic Mechanical Analysis (opens in a new tab)

  12. Air void characterization in fresh cement paste through ultrasonic attenuation using an immersion procedure

    … the common field methods for measuring air content in fresh concrete cannot distinguish between entrained and entrapped air voids, and the actual air content in the hardened concrete can vary from that determined by these tests due to a variety of factors such as workability, placing …

    gatech Repository record for Air void characterization in fresh cement paste through ultrasonic attenuation using an immersion procedure (opens in a new tab)

  13. A Mathematical Framework for Volume Modeling and Simulation

    … for fast and casual exploration of ideas for volume-based simulation and modeling. Several applications of the framework are shown, including the simulation of fluid dynamics for computer graphics applications. A procedure for automatically generating OpenCL code from these is given, along …

    clemson Repository record for A Mathematical Framework for Volume Modeling and Simulation (opens in a new tab)

  14. Production and Optimization of Continuous Roving-Like UTSI Pitch based Carbon Fiber Composites

    … ability to minimize porosity and increase fiber volume/content. The use of extra slow hardener allowed excellent control over the wetting, degassing, and cure time. Increasing applied pressure during the fabrication of the composites increases the fiber content/volume leading to improvements in …

    ut-knoxville Repository record for Production and Optimization of Continuous Roving-Like UTSI Pitch based Carbon Fiber Composites (opens in a new tab)

  15. MULTISCALE MODELING OF LIQUID CRYSTALLINE/NANOTUBE COMPOSITES

    … properties of final composite at different fiber volume content as well as at different orientations and lengths of the fibers. The orientation of the LC monomers is supposed to be carried out using electric or magnetic fields. A computer program is modeled incorporating the Mori-Tanaka modeling …

    mtu Repository record for MULTISCALE MODELING OF LIQUID CRYSTALLINE/NANOTUBE COMPOSITES (opens in a new tab)

  16. Micromechanics Modeling of Nonlinear and Time-dependent Responses of Piezoelectric 1-3, 0-3, and Hybrid Composites

    … the effects of microstructural geometry and volume content of the piezoelectric inhomogeneities as well as loading history on the overall nonlinear and hysteretic responses of active composites. Finally, a multi-scale analysis of a functionally graded piezoelectric bimorph actuator using the …

    tamu Repository record for Micromechanics Modeling of Nonlinear and Time-dependent Responses of Piezoelectric 1-3, 0-3, and Hybrid Composites (opens in a new tab)

  17. The Appeal of Gambling Advertising on Twitter to Children and Young Persons.

    … methodologies (big data analytics and manual content analysis), the first study focused on conventional advertising, whereas the second study focused on content marketing. Based on the preliminary studies' novel findings about volume, content and regulatory compliance of gambling adverts, the …

    bristol Repository record for The Appeal of Gambling Advertising on Twitter to Children and Young Persons. (opens in a new tab) Download PDF for The Appeal of Gambling Advertising on Twitter to Children and Young Persons. (opens in a new tab)

  18. Investigating The Formation And Structure Of Amyloid Fibrils In Solution And On Surface

    … the tip-dilation effect and provide the relative volume content of various species at mesoscale. The other is performed the high-resolution AFM equipped with ultrasharp tip to identify the molecular basis of various polymorphs at molecular-level. Overall, our AFM works provide a guideline for …

    penn Repository record for Investigating The Formation And Structure Of Amyloid Fibrils In Solution And On Surface (opens in a new tab)

  19. Optimization of Polymer-based Nanocomposites for High Energy Density Applications

    … unmodified polymer. The key is maintaining a low volume content to ensure a high inter-particle distance, effectively minimizing the effect of local field on the composite's dielectric breakdown. The first step is studying the particle size and aspect ratio effects on the dielectric properties to …

    tamu Repository record for Optimization of Polymer-based Nanocomposites for High Energy Density Applications (opens in a new tab)

  20. The effect of aggregate on the age at cracking of bonded concrete overlays subjected to restrained deformation

    … is prone to failure due to differential volume changes between the newly cast repair material and the existing substrate. These volume changes can be attributed to thermal and shrinkage differences, with drying shrinkage being identified as they key source of the volume change. When the …

    cape-town Repository record for The effect of aggregate on the age at cracking of bonded concrete overlays subjected to restrained deformation (opens in a new tab)

Page 1 of 2