Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 67 for “"Volume Flow Rate"”.

  1. Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Round Jet

    Particle image velocimetry (PIV) is an optical flow measurement technique that is used to measure volume flow rate at the exit of a turbulent, round nozzle. The objective of this thesis is to determine how to best make this measurement. The quality of the measurement is affected by a range of data …

    utahstate Repository record for Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Round Jet (opens in a new tab)

  2. Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Planar Jet

    Particle image velocimetry (PIV) is used to make volume-flow-rate measurements at the exit of a turbulent, planar nozzle. The objective of this report is to assess a range of data acquisition and processing parameters. Data is acquired for volume flow rates of Reynolds numbers between 10,000 and …

    utahstate Repository record for Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Planar Jet (opens in a new tab)

  3. Reducing Fuel Evaporation Using Floating Objects

    … surface was investigated. It is found that the volume flow rate of water vapor decreases for inlet speeds less than Re = 340 and increases for speeds greater than Re = 340 for horizontal inlet flow. Adding floating objects to the water surface affected the volume flow rate and volume …

    washington Repository record for Reducing Fuel Evaporation Using Floating Objects (opens in a new tab)

  4. Electric energy optimization for the pumps of a cooling and process water system at Södra Cell Värö

    … knowledge of the network, which resulted in a flow chart. By using the Excel-based computational programme Pumpanalys, the necessary pump head and users limiting in the network could be determined, giving information about the system head curve used for the suggestions for energy optimization. …

    chalmers Repository record for Electric energy optimization for the pumps of a cooling and process water system at Södra Cell Värö (opens in a new tab)

  5. Computational Fluid Dynamics Modeling of Counter-Current Flow in Channels Separated by a Membrane

    Counter current flow in channels separated by membrane were studied in several published studies. The present study aims to numerically and analytically simulate and physically describe the distribution of pressure, volume flow rate and velocity in counter current flow module. Numerical simulation …

    arkansas Repository record for Computational Fluid Dynamics Modeling of Counter-Current Flow in Channels Separated by a Membrane (opens in a new tab)

  6. Analog Computer Simulation of Glomerulus Filtration in the Renal System

    … is the object of this thesis to: 1) Simulate the volume flow equation (1) through the capillary vasculate of the kidney with the analog computer, and 2) Show quantitatively as well as qualitatively the effect of various parameter changes on the volume flow rate.

    ucf Repository record for Analog Computer Simulation of Glomerulus Filtration in the Renal System (opens in a new tab)

  7. Generalized Couette Flow of a Power-Law Fluid in an Annulus

    Generalized couette flow of a non-Newtonian power-law fluid in an annulus is analyzed. Cases ranging from pure shear flow to flow through an annulus with stationary walls are considered. Since the fluid does not exhibit linear characteristics, superposition of the solutions for pure shear (drag) …

    marquette Repository record for Generalized Couette Flow of a Power-Law Fluid in an Annulus (opens in a new tab)

  8. Quantitative Cerebrovascular Magnetic Resonance Imaging

    … relevant numerical values associated with blood flow through the brain. Anatomy, pathology and basic angiography methods were reviewed. Several other MR imaging methods for obtaining cerebrovascular measurements are reviewed. Exploration of the lowest achievable variance with MR imaging was …

    calgary Repository record for Quantitative Cerebrovascular Magnetic Resonance Imaging (opens in a new tab)

  9. The development of optical measurement techniques for gas species and surface temperature on a planar SOFC methane-steam reformer

    … means to reduce Rayleigh line effects is demonstrated, and background fluorescence suppression through polarization of the 308 nm light source is presented. The arrangements of the experimental set-up, gas supply, metering, and humidification are shown, as are the optical arrangements for laser …

    ubc Repository record for The development of optical measurement techniques for gas species and surface temperature on a planar SOFC methane-steam reformer (opens in a new tab) Download PDF for The development of optical measurement techniques for gas species and surface temperature on a planar SOFC methane-steam reformer (opens in a new tab)

  10. Design Tool for a Ground-Coupled Ventilation System

    … pipe diameter, soil type, number of pipes, volume flow rate, and bypass system. The tool uses regression equations created from many GCV system design simulation data using Autodesk Computational Fluid Dynamics software. As a result, this tool helps users choose the most suitable GCV system …

    vt Repository record for Design Tool for a Ground-Coupled Ventilation System (opens in a new tab)

  11. The extractable power from tidal streams, including a case study for Haida Gwaii

    … is developed for one-dimensional, non-steady flow through a channel of varying cross-section. Flow acceleration, bottom drag, and exit separation effects are included in the momentum balance. The model is applied to Masset Sound and Masset Inlet in Haida Gwaii, a remote island region, to …

    uvic Repository record for The extractable power from tidal streams, including a case study for Haida Gwaii (opens in a new tab)

  12. An Experimental Evaluation on Air Conditioning Performance with Vairtex Air Director Applied on Residential Condenser Unit

    … performance evaluations at two refrigerant flow rates. As the air director was installed on the condenser unit, COP was improved by an appreciable amount of maximum 5% while the evaporator delivered cooler air at its exit by maximum 15%. Compressor power consumption was reduced by 4.5%. …

    carleton Repository record for An Experimental Evaluation on Air Conditioning Performance with Vairtex Air Director Applied on Residential Condenser Unit (opens in a new tab)

  13. Simulation of lava flow with small scale models

    <p>The problem of the simulation of lava flow at laboratory scale using materials other than lava is investigated. To provide a short cut to the simulation, some simple analytical solutions of the governing equations that are pertinent to the study of lava flow dynamics are given using two …

    iastate Repository record for Simulation of lava flow with small scale models (opens in a new tab)

  14. Quantitative studies of flow in small blood vessels of the frog, Rana Pipiens, and of the hamster, Mesocricetus Auratus

    Quantitative relationships between blood flow velocity, vessel diameter, width of the peripheral plasma layer and induction of thrombus formation were studied in small blood vessels of the retrolingual membrane and intestinal mesentery of the frog, Rana Pipiens, and of the cheek pouch of the golden …

    bu Repository record for Quantitative studies of flow in small blood vessels of the frog, Rana Pipiens, and of the hamster, Mesocricetus Auratus (opens in a new tab) Embargoed until 2999-01-01

  15. Design of a Combustion System Simulating Waste Heat Recovery from Diesel Engine Exhaust Gases

    … system simulating diesel engine exhaust gas volume flow rate and temperature conditions for waste energy recovery is analyzed and discussed. The system consists of a fan which supplies the air. The slightly compressed air is then ducted through a combustor where it is heated, and then to an …

    odu Repository record for Design of a Combustion System Simulating Waste Heat Recovery from Diesel Engine Exhaust Gases (opens in a new tab)

  16. Experimental Investigation of Plastic Heat Exchanger for Single Phase and Condensation Heat Transfer

    … results show that both the heat transfer rate, effectiveness and pressure drop increases with the shell side volume flow rate for all schemes. Furthermore, the segmental baffle HX configuration was found to perform better than the continuous helical, trisection and quadrant baffle HX …

    tamu Repository record for Experimental Investigation of Plastic Heat Exchanger for Single Phase and Condensation Heat Transfer (opens in a new tab)

  17. Melt spinning of continuous filaments by cold air attenuation

    … processing temperature, air velocity and polymer volume flow rate. Effects of changes in processing variables on the fiber diameter, molecular orientation, crystallinity, tensile strength and other properties were studied. Furthermore, a theoretical model was developed to analyze the …

    gatech Repository record for Melt spinning of continuous filaments by cold air attenuation (opens in a new tab)

  18. Flow rate modulated periodic backflush to improve dead-end filtration

    … A process which could stop fouling, reintegrate the fouling material into the bulk flow, and allow for further processing could be used to improve the recovery percentage of dead-end systems increasing their success and use. The purpose of this research is to determine if novel flow profiles …

    gatech Repository record for Flow rate modulated periodic backflush to improve dead-end filtration (opens in a new tab)

  19. CFD procedure for studying dispersion flows and design optimization of the solvent extraction settler

    … the behaviour of organic-aqueous dispersion and flow patterns in the copper solvent extraction settler with the aim of developing a complementary method for traditional physical experiments in settler design work. The simulations have been carried out with an Eulerian-Eulerian two-phase model of …

    aalto Repository record for CFD procedure for studying dispersion flows and design optimization of the solvent extraction settler (opens in a new tab)

Page 1 of 4