Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Volume-average"”.
-
Volume average technique for turbulent flow simulation and its application to room airflow prediction
… required. On the other hand, the Reynolds Averaged Modelling (RAM) method has many limitations which hinder its applications to turbulent flows of practical significance. Room airflow featuring co-existence of laminar and turbulence regimes is a typical example of a flow which is difficult …
-
Thermal dispersion and convective heat transfer during laminar pulsating flow in porous media
… that are encountered in the standard, volume-average energy equations for porous media are carried out. The investigated porous media are periodic arrays of square cylinders. Detailed numerical data for the porosity range of 0.64 to 0.84, with flow Reynold's numbers from 0-1000 are …
-
Quantitative assessment of pore types and pore size distribution across thermal maturity, Eagle Ford Formation, South Texas
… Porosity in low-maturity samples (Ro~0.5%) is volumetrically dominated (0.1% -12.5% bulk volume, average 6.2%) by relatively large, mostly interparticle, primary mineral-associated pores (median sizes range 35.9-52.7 nm). Larger pores are generally associated with coccolith debris that is …
-
Solutions of Eshelby-Type Inclusion Problems and a Related Homogenization Method Based on a Simplified Strain Gradient Elasticity Theory
… an ellipsoidal inclusion are obtained. Also, the volume average of the new Eshelby tensor over the inclusion in each case is analytically derived. It is quantitatively shown that the new Eshelby tensor and its average can explain the inclusion size effect, unlike its counterpart based on classical …
-
Design Analysis of 3D Lithium-ion Batteries with Computational Modeling
… ionic transport pathways. Physics-based 3D volume-average electrochemical models were generated in VIBE-AMPERES, a battery modeling software developed by Oak Ridge National Laboratory, to assess the impact of 3D electrode architectures and materials on the charge and discharge performance of …
-
Calibration of New Concrete Shrinkage and Creep Model for ACI Committee 209
… between autogenous and drying shrinkage using a volume-average pore relative humidity and treats drying creep as an additional stress-dependent shrinkage, linking together all these phenomena. The proposed expressions are designed to facilitate traditional integral-type analysis, but also …
-
Radiative impacts on water mist/cloud droplet condensative growth
… For example, with 145 W/m2 radiative flux, the volume-average size (D43) increased from 29 to 39 µm after approximately 60 seconds of (minimum) centerline residence time in the radiative cooling section. Thus, experimental evidence was obtained that demonstrated that droplet radiation to a …
-
Modelling Stirred Suspension Bioreactors for Scalable Expansion of Pluripotent Stem Cells
… by the difference in viscosity models. Further, volume average turbulent energy dissipation rate from CFD studies with non-Newtonian viscosity was used to successfully maintain murine embryonic stem cell aggregate size distribution during bioreactor scale-up. The results of this study demonstrate …
-
HIGH TEMPERATURE FLOW SOLVER FOR AEROTHERMODYNAMICS PROBLEMS
… (KATS). The solver uses a second-order finite volume approach to solve the laminar Navier– Stokes equations, species mass conservation and energy balance equations for flow in chemical and thermal non-equilibrium state, and a fully implicit first-order backward Euler method for the time …
-
Extensional Flow Blending of Immiscible Polymers with Nanoparticle Stabilization
… of extensional flow blending was to reduce the volume-average diameter of the dispersed polymer phase, especially with increasing strains and flow rates, or strain rates, which is directly dependent on both. Finding suitable conditions for the nanoparticles to selectively localize at the HDPE/PS …
-
The Effects of Nonuniform Microstructures Ni/Al Reactive Laminate Sheets and Powders
… vary with processing conditions rather than the volume average bilayer thickness, with foils that had more gradual rolling passes having a hotter and faster reaction compared to foils with more severe plastic deformation during rolling. The detailed microstructural information gathered from SEM …
-
Multidisciplinary and multiobjective design optimisation of coronary stents
… measures the radial strength of the stent; (ii) volume average stress, which measures potential arterial injury caused by the stenting procedure; (iii) haemodynamic low and reverse index, which measures the haemodynamic alteration relevant to IR; (iv) volume average drug, which measures the …
-
Assessing Bikeability in Virginia: A Comparison of CHATGPT-4o and Traditional Models
… with three other factors: greenery, traffic volume (Average Annual Daily Traffic), and bike lane types, were used to develop the Bikeability Index (BI). The distribution of the BI varied across Virginia, with classes ranging from low to very high. Higher BI pointed to more bicycle-friendly …
-
Better mesh generation improves stability of finite volume simulations
… to improvements in the mapping between control volume average solution values used to evaluate fluxes in the finite volume flow solver, which has been shown previously to improve stability. A robust relationship is observed between a more uniform neighbor count and lower norms for this mapping, …
-
A Causal Model of Hospital Volume, Structure and Process Indicators, and Surgical Outcomes
… tested a conceptual model to explain why higher volumes of certain surgical procedures lead to better patient outcomes. The model incorporated hospital structural characteristics and process of care indicators to explain the volume-outcome relationship. The volume-outcome relationship was further …
-
Evaluation of the Mechanical Properties of 3D Printed Carbon Fiber Composites
… Pro was capable of producing stronger parts on average, while the Mark Two produced more dimensionally accurate parts. Parts printed with the Creator Pro achieved higher Ultimate Tensile Strengths and Elastic Moduli than their respective Mark Two counterparts on average. Various analytical …
-
Absolute tumor perfusion determined by nuclear magnetic resonance spectroscopy :
… allowed the simultaneous performance of whole-volume average perfusion measurements of a rat tumor model with both the modified NMR uptake method and the commonly used microsphere approach. Finally, Chapter IV summarizes the dissertation experiments performed, and briefly comments on the …
-
INTERACTION OF INTENSE LASER PULSES WITH DROPLET AND CLUSTER SOURCES: APPLICATION TO EXTREME ULTRAVIOLET LITHOGRAPHY AND PLASMA WAVEGUIDE GENERATION
… those in unclustered gas targets of the same volume average atomic density. The maximum long pulse absorption observed in cluster jets under our range of conditions was 35%. A third topic explored was resonant pulse-shortening of Bessel beams in the under-dense (Ne is ~10^(-2) Ncr) plasma …
-
Strain Gradient Solutions of Eshelby-Type Problems for Polygonal and Polyhedral Inclusions
… integrals over the polygonal cross section and volume integrals over the polyhedral inclusion, are evaluated. For the polygonal inclusion problem, the three area integrals are first transformed to three line integrals using the Green's theorem, which are then evaluated analytically by direct …
-
Scaling up Production of Pluripotent Stem Cells in Stirred Suspension Bioreactors for Regenerative Medicine
… to maintain the CFD calculated variable of volume average energy dissipation rate. This variable was found to greatly impact cell quantity and quality through the hydrodynamic control of aggregate size and homogeneity. A suggested operating range of agitation rates was set and biologically …
Page 1 of 3