Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 97 for “"Volumetric Properties"”.

  1. Investigation into Asphalt Concrete Material and Volumetric Properties that Promote Moisture Damage

    … asphalt binders (binder); and (2) identifies volumetric mix properties that inhibit or assist in the susceptibility of Hot Mix Asphalt (HMA) to moisture damage based on time dependent phenomenological mechanical responses. These two research elements provide insight into the physical, …

    manitoba Repository record for Investigation into Asphalt Concrete Material and Volumetric Properties that Promote Moisture Damage (opens in a new tab)

  2. Volumetric Properties of Industrially Relevant Solutes in Carbon Dioxide, a Green Solvent

    … relevant solutes in CO2. Many thermophysical properties are sensitive to small temperature and pressure changes in the near-critical region. This allows for accurate fitting of equations-of-state to data collected in this region which leads to the optimization of industrial processes. This …

    calgary Repository record for Volumetric Properties of Industrially Relevant Solutes in Carbon Dioxide, a Green Solvent (opens in a new tab)

  3. Phase equilibria and volumetric properties for the system NaCl-CaCl₂-H₂O

    … span the pressure and temperature of earlier volumetric studies and extend to higher molalities than reported previously. The relative densities have been fitted as apparent molar volumes (V<sub>Φ</sub>) using the Pitzer ion-interaction treatment, with appropriate expressions chosen for the …

    vt Repository record for Phase equilibria and volumetric properties for the system NaCl-CaCl₂-H₂O (opens in a new tab)

  4. Characterization of the volumetric properties of five bioactive peptides, liposomes and their interactions

    The thermodynamic properties of bioactive peptides determine how they interact with cellular assemblies. Ultrasonic velocity and density measurements were used to analyse the volumetric properties in aqueous solution of 3 different materials: KCl, bioactive peptides (from hemp seed and dairy …

    manitoba Repository record for Characterization of the volumetric properties of five bioactive peptides, liposomes and their interactions (opens in a new tab)

  5. The Volumetric Properties for Selected Impurities in Dense CO2 Destined for Re-Injection

    … These impurities can impact the thermophysical properties and chemical equilibria within the fluid stream. In this work, the volumetric influence of H2S, COS, CS2, SO2, and O2 impurities in a dense CO2 phase were studied through high-precision density measurements. The densities were used in …

    calgary Repository record for The Volumetric Properties for Selected Impurities in Dense CO2 Destined for Re-Injection (opens in a new tab)

  6. Volumetric Properties and Viscosity of Fluid Mixtures at High Pressures: Lubricants and Ionic Liquids

    The present thesis explores the volumetric and transport properties of complex fluid mixtures under pressure in order to develop a better, more holistic understanding of the relationship between the volumetric properties, derived thermodynamic properties, and viscosity. To accomplish this broad …

    vt Repository record for Volumetric Properties and Viscosity of Fluid Mixtures at High Pressures: Lubricants and Ionic Liquids (opens in a new tab)

  7. Comparison of volumetric properties for 150-mm versus 100-mm diameter gyratory compacted HMA specimens

    … produce HMA specimens for mix design testing and volumetric evaluation. This study explores the possibility of using a 100-mm (4-inch) diameter mold to produce these specimens.</p> <p>Loose HMA was collected from typical TDOT paving projects across the state of Tennessee. After compaction, the …

    ut-knoxville Repository record for Comparison of volumetric properties for 150-mm versus 100-mm diameter gyratory compacted HMA specimens (opens in a new tab)

  8. Volumetric Properties and Viscosity of Lubricant Oils and the Effects of Additives at High Pressure and Temperatures

    … to the characterization of the thermodynamic properties and viscosity of lubricant base oils modified with polymeric additives. Several groups of mineral and synthetic base oils, including Ultra S4, Ultra S8, and poly alpha olefin PAO 4 have been studied. Among the various types of additives …

    vt Repository record for Volumetric Properties and Viscosity of Lubricant Oils and the Effects of Additives at High Pressure and Temperatures (opens in a new tab)

  9. Experimental determination of the volumetric properties for the system CO₂-CH₄-N₂ at 100-1000 bars and 50-300°C

    … wide variety of geologic environments. However, volumetric data for gaseous mixtures are scarce, particularly at high pressures and temperatures. In this study, the volumetric properties of binary and ternary mixtures in the system CO₂-CH₄-N₂ were measured at 100-1000 bars, 50-300°C, using a …

    vt Repository record for Experimental determination of the volumetric properties for the system CO₂-CH₄-N₂ at 100-1000 bars and 50-300°C (opens in a new tab)

  10. Densities and volumetric properties of {difurylmethane + [(C5 – C8) n-alkane or an amide]} binary systems at (293.15, 298.15 and 303.15) K; modelling excess molar volumes by Prigogine-Flory-Patterson theory.

    … The 𝑉𝑚 𝐸 data have been used to derive the volumetric properties which include apparent molar volumes (V,i), excess partial molar volumes ( 𝑉𝑖 𝐸), limiting excess partial molar volumes ( 𝑉𝑖𝐸,∞) limiting partial molar volumes (𝑉𝑖 ∞) at infinite dilute region of each component in each …

    botswana Repository record for Densities and volumetric properties of {difurylmethane + [(C5 – C8) n-alkane or an amide]} binary systems at (293.15, 298.15 and 303.15) K; modelling excess molar volumes by Prigogine-Flory-Patterson theory. (opens in a new tab)

  11. Hot mix asphalt volumetric optimization using artificial intelligence

    The empirical procedure of HMA volumetric design requires time and effort. This procedure is a common practice when adjusting the job formula due to eventual changes in aggregates and binder properties imposing upon asphalt plants. This empirical method is based on gradation specifications limits …

    ets-quebec Download PDF for Hot mix asphalt volumetric optimization using artificial intelligence (opens in a new tab)

  12. PERFORMANCE ASSESSMENT OF FIBER-REINFORCED ASPHALT MIXTURES: A COMPREHENSIVE LABORATORY AND FULL-SCALE INVESTIGATION

    … is always challenging because of their impact on volumetric properties and clumping while mixing. Therefore, a comprehensive study was conducted to address these challenges and subsequently evaluate the performance potential of fiber-reinforced asphalt mixture (FRAM). For this purpose, different …

    rowan Repository record for PERFORMANCE ASSESSMENT OF FIBER-REINFORCED ASPHALT MIXTURES: A COMPREHENSIVE LABORATORY AND FULL-SCALE INVESTIGATION (opens in a new tab)

  13. Fluid-phase thermodynamics from molecular-level properties and interactions based in quantum theory

    … software packages are used to calculate rigorous properties of the functional groups within molecules of interest. These properties are incorporated into an intermolecular potential energy function which describes interactions between entire molecules as a set of interactions between functional …

    njit Repository record for Fluid-phase thermodynamics from molecular-level properties and interactions based in quantum theory (opens in a new tab)

  14. Properties of Warm Mix Asphalt from Two Field Projects: Reno, Nevada and Manitoba, Canada.

    This study was geared towards evaluating the properties of warm mix asphalt (WMA) mixes that were obtained from two field projects; Reno, NV and Manitoba, Canada, in the laboratory, relative to conventional hot mix asphalt (HMA) mixes. The former field project utilized the Ultrafoam® WMA technology …

    unr Repository record for Properties of Warm Mix Asphalt from Two Field Projects: Reno, Nevada and Manitoba, Canada. (opens in a new tab)

  15. P-401 Mixtures: Aggregate Gradation Bands

    … leading to adjustments that might compromise the volumetric properties of the mixtures and lead to more costs and delays. This research aims to replicate an airport paving project mix design that meets FAA aggregate and mix design specifications. A wide range of performance tests will then be …

    unr Repository record for P-401 Mixtures: Aggregate Gradation Bands (opens in a new tab)

  16. Short-term Comparison of Frictional Properties of Superpave and Balance Mix Design Hot Mix Asphalt Mixes

    … rutting, the implemented level 1 only considered volumetric properties and not mixture performance tests. Therefore, development in the asphalt community has addressed some of the issues with the Superpave mix design, e.g., cracking and raveling, with the Balance Mix Design (BMD) approaches. The …

    vt Repository record for Short-term Comparison of Frictional Properties of Superpave and Balance Mix Design Hot Mix Asphalt Mixes (opens in a new tab)

  17. USE OF POST-CONSUMER RECYCLED (PCR) PLASTICS IN ASPHALT MIXES: A LABORATORY STUDY

    … plastic pose several challenges both from the volumetric properties and performance standpoints. Specifically, this study investigates the changes in the volumetric properties and performance of PCR plastic-modified asphalt mixes designed using the Balanced Mix Design (BMD) approach. For this …

    oklahoma-thes Repository record for USE OF POST-CONSUMER RECYCLED (PCR) PLASTICS IN ASPHALT MIXES: A LABORATORY STUDY (opens in a new tab)

Page 1 of 5