Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"Vortex Generators"”.

  1. Air jet vortex generators for wind turbines

    Air jet vortex generators are a boundary layer control device and as such can effect a significant delay to the stall of an aerofoil. They can also reattach a separated flow, as long as the angle of attack is less than the air jets 'on' stall angle. A wind tunnel model was built and tested and then …

    city-london Download PDF for Air jet vortex generators for wind turbines (opens in a new tab)

  2. A Study on Elastic Vortex Generators Inspired by Monami

    Vortex Generators (VGs) enhance momentum exchange near surfaces by generating streamwise vortices that delay flow separation and improve mixing and heat-transfer efficiency across numerous engineering applications. While Rigid VGs (RVGs) improve performance, they also increase pressure drop, …

    unt Repository record for A Study on Elastic Vortex Generators Inspired by Monami (opens in a new tab)

  3. Experimental investigation of multiple orifice air jet vortex generators

    … investigation was conducted on an Air Jet Vortex Generator (AJVG) consisting of a closely spaced set of four, geometrically related sub-orifices. The jet was a discretised version of an ideal nozzle featuring an injection width that smoothly increased by a function of Euler’s number (e). …

    unsw Repository record for Experimental investigation of multiple orifice air jet vortex generators (opens in a new tab)

  4. Heat Transfer Performance of Flag Vortex Generators in Rectangular Channels

    … channels equipped with a flapping flag as a vortex generator. Specifically, it aimed to determine the influences of channel geometry, flag material properties and flow conditions on the flapping dynamics of the flag, turbulence characteristics inside the channel and the resulting heat …

    auckland-ms Repository record for Heat Transfer Performance of Flag Vortex Generators in Rectangular Channels (opens in a new tab)

  5. Performance evaluation of louvered fin compact heat exchangers with vortex generators

    … thermal hydraulic performance than when only vortex generators or only louvers are used. It is shown that for the same pumping power and heat duty, the compound heat exchanger is smaller in volume. Consequently, less space is required, the material cost is lower and (often also) the …

    ghent Repository record for Performance evaluation of louvered fin compact heat exchangers with vortex generators (opens in a new tab)

  6. Application of airjet vortex generators to control helicopter retreating blade stall

    … migration and shedding of a leading-edge vortex. The leading-edge vortex produces a large pressure wave moving aft on the aerofoil upper surface and creating abrupt changes in the flowfield. The pressure wave also contributes to large lift and moment overshoots in excess of static values …

    city-london Download PDF for Application of airjet vortex generators to control helicopter retreating blade stall (opens in a new tab)

  7. Control of air-intake lip separation using air-jet vortex generators

    … in particular the novel application of Air-Jet Vortex Generators (AJVGs), can be used to enhance the off-design performance of an air intake system allowing a design focused heavily toward a particular design point. A review of the open literature suggests a noticeable benefit of flow control in …

    city-london Download PDF for Control of air-intake lip separation using air-jet vortex generators (opens in a new tab)

  8. Heat transfer enhancement downstream of vortex generators on a flat plate

    … transfer when a single row of counter-rotating vortex blades is attached to a flat surface. The major emphasis of the work is to study the way in which vortex generators augment the heat transfer coefficient of an initially-laminar boundary layer over a flat, constant-heat-flux surface exposed …

    iastate Repository record for Heat transfer enhancement downstream of vortex generators on a flat plate (opens in a new tab)

  9. Experimental Aerodynamic Analysis of a Wing-Flap System with Delta Vortex Generators

    <p>The principle idea upon which the use of vortex generators (VGs) is based has been to control flow separation. The characteristic of VGs has been used to improve lift and alter the stall characteristics of aircraft and has been a relatively common practice for many years. Due to the seemingly …

    ut-knoxville Repository record for Experimental Aerodynamic Analysis of a Wing-Flap System with Delta Vortex Generators (opens in a new tab)

  10. Use of vane and air jet vortex generators in a thrust augmenting ejector

    The beneficial application of vortex generators to control boundary layers in the sub- and supersonic flow regime has been shown in the past. In this thesis the use of vortex generators is extended beyond boundary layer control by using them within an ejector-diffuser type augmentor. During the …

    city-london Download PDF for Use of vane and air jet vortex generators in a thrust augmenting ejector (opens in a new tab)

  11. A study of the application of air-jet vortex generators to intake ducts

    … bend of the duct. It has been proposed that vortex generators may be usefully employed in such intake ducts to enhance the homogeneity of the pressure distribution at the engine face, and hence, reduce the unsteady loading on the engine. Both vane and air jets have been tested experimentally …

    city-london Download PDF for A study of the application of air-jet vortex generators to intake ducts (opens in a new tab)

  12. IMPACT ON WIND TURBINE BLADE DESIGN AND AERODYNAMIC PERFORMANCE USING INTEGRAL VORTEX GENERATORS

    … on performance, loads and cost using integral vortex generators on wind turbine blade designs. In order to investigate the possibility of this new design space, an optimization analysis is carried out. Three configurations are designed as a part of this dissertation. The current phase of work …

    ku Repository record for IMPACT ON WIND TURBINE BLADE DESIGN AND AERODYNAMIC PERFORMANCE USING INTEGRAL VORTEX GENERATORS (opens in a new tab)

  13. The effects of micro-vortex generators on normal shock wave/boundary layer interactions

    … work concentrates on analyzing the effects of vortex generators (VGs) as a flow control method by contributing a greater understanding of the flowfield generated by these devices and characterizing their effects on the SWBLI. The vortex generators are utilized with the goal of improving …

    uiuc Repository record for The effects of micro-vortex generators on normal shock wave/boundary layer interactions (opens in a new tab)

  14. Large eddy simulation of shock boundary layer interaction control using micro-vortex generators

    … a novel type of flow control device called micro-vortex generators (µVGs) which may offer similar control benefits without the bleed penalties. µVGs have the ability to alter the near-wall structure of compressible turbulent boundary layers to provide increased mixing of high speed fluid which …

    uiuc Repository record for Large eddy simulation of shock boundary layer interaction control using micro-vortex generators (opens in a new tab)

  15. An Experimental Study of Hemispherical Vortex Generators for Separation Control over a NACA-0012

    … is a study towards understanding hemispherical vortex generators (VGs) and their effectiveness on delaying flow separation over an airfoil. To be tested was whether these devices could generate a horseshoe vortex structure that effectively entrained higher momentum flow into the boundary layer …

    ut-knoxville Repository record for An Experimental Study of Hemispherical Vortex Generators for Separation Control over a NACA-0012 (opens in a new tab)

  16. Modification of air flows within an industrial carcass chiller using delta wing vortex generators

    The chilling of carcasses after slaughter has a considerable bearing on process costs and quality of the meat. Uniform air distribution is essential for the optimal operation of carcass chillers, yet many existing chillers have highly variable and ineffective air flow. This directly affects the …

    massey Repository record for Modification of air flows within an industrial carcass chiller using delta wing vortex generators (opens in a new tab)

  17. Effect of radial inflow on vortex intensification and its application to wind vortex generators

    <p>A new wind vortex turbine, called "tornado-type wind generator system," was studied both theoretically and experimentally for the purpose of better understanding the basic nature of a vortex flow and further improvement of its power efficiencies. Analytical solutions were obtained from the …

    iastate Repository record for Effect of radial inflow on vortex intensification and its application to wind vortex generators (opens in a new tab)

  18. The effects of low-profile vortex generators on flow in a transonic fan-blade cascade

    … fan-blade cascade which had low-profile vortex generators (VGs) attached to the suction surfaces of the blades. The simulation was conducted using a blowdown wind tunnel at a Mach number of 1.4. The objective was to assess the effects of vortex generating devices on the suction surface …

    nps Repository record for The effects of low-profile vortex generators on flow in a transonic fan-blade cascade (opens in a new tab)

Page 1 of 6