Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 53 for “"Wall Function"”.
-
Use of synthetic sugar analogs to probe plant cell wall function in Arabidopsis thaliana
… 70% of plant biomass is derived from plant cell walls. Plant cell walls are polysaccharide-rich extracellular matrices that encapsulate nearly all plant cells and collectively, these polysaccharides are the most abundant biopolymers on the planet. The evolution of cell wall polysaccharides was …
-
Development of an Efficient Viscous Approach in a Cartesian Grid Framework and Application to Rotor-Fuselage Interaction
… employed for the turbulence modeling, and a new wall function approach is devised for the unstructured Cartesian grid solver. It is quite challenging and has never done before to apply wall function approach to immersed Cartesian grid. The difficulty lies in the inability to acquire smooth …
-
Modelling particulate fouling in heat exchanger with high solid content liquid suspension
… transport of particles into the vicinity of the wall, adherence on the surface and possible re-entrainment from the surface. The CFD fouling model was first implemented as a detailed two fluid Eulerian model, which included all the relevant near-wall forces affecting on the colloidal particles …
-
Design of high efficiency blowers for future aerosol applications
… curves showing static pressure rise as a function of flow rate through the impeller were generated using FLUENT and these were validated through experiments. Experimentally measured efficiency (÷EXP) for the base-design was around 10%. This was attributed to the low efficiency of the …
-
CFD modelling and validation of a large 2-stroke marine diesel engine
… working processes. The turbulence models and the wall functions in the CFD solver were firstly tested using two basic 2D cases to obtain performance results in the modelling of turbulence flow and heat transferring near the wall. It was concluded that the RNG and the realisable ?-? turbulence …
-
Wall functions for the k - [epsilon] turbulence model in generalized nonorthogonal curvilinear coordinates
<p>Wall functions are often employed to model turbulent flow near solid walls. A method has not been available, however, for the application of wall functions to generalized curvilinear coordinate systems, particularly those with nonorthogonal grids. A general method for this application is …
-
Implementation and verification of LES models for SRT Lattice Boltzmann methods.
… (CSMA & DSMA) and WALE.Initially, three wall-free test cases, namely Forced and Decaying Homogeneous Isotropic Turbulence (FHIT & DHIT) and the Taylor-Green Vortex (TGV), were employed to verify the algorithms of the new implementations. To further improve the understanding of the models …
-
Rychlostní součinitele plynových trysek nízkoemisního hořáku
… dvou metod pro modelování proudění (Scalable Wall Function a Enhanced Wall Treatment) a vytvoření metodiky výpočtu pro úlohy tohoto typu. Výsledky prezentované v této práci mohou být využity pro další studium plynových trysek jak z pohledu výpočtového, tak experimentálního.
-
An experimental and numerical investigation of heat transfer downstream of a normal film cooling injection slot
… or methane concentration very close to the wall, mass transfer measurements are conducted for film cooling mass flow ratios ranging from zero to 0.5. The mass transfer coefficients are calculated using a wall function correction formula, which corrects the measurements for displacement from …
-
Advanced turbulence models for recirculating flows
… effect is less important. For flow close to a wall, where local Reynolds number is low and viscous effect dominates, the standard k-e model will not perform satisfactorily. The drawback has limited the first grid adjacent to the wall to be placed in the fully turbulent region which is not close …
-
Transition of free convection boundary layer flow
… standard, RNG and Realizable with an enhanced wall function are employed in the simulations. Additionally, a Large Eddy Simulation (LES) technique is also applied to particularly investigate the flow field and transition in a heated plate facing upward. Numerous published papers presented the …
-
A numerical study of buoyant turbulent flows using low-Reynolds number k-e model
… separating and reattaching flows because of the wall-function approach employed in the model. The low-Reynolds number k-e model is considered to be an appropriate model for recirculating flows because the model does not employ wall functions. Results of the two different models are compared …
-
Computational Fluid Dynamics Analysis of Non-Cohesive Sediment Transport in Open Channel Flow
… shapes and structures form the mesh. The wall function approach was implemented to account for roughness effects of the physical domain’s boundary surfaces. After validation with experimental results, the coupled model was utilized in four practical applications: transport of suspended …
-
Ein Konzept zur numerischen Berechnung inkompressibler Strömungen auf Grundlage einer diskontinuierlichen Galerkin-Methode in Verbindung mit nichtüberlappender Gebietszerlegung
… standard k-epsilon turbulence model with special wall function is done in this context. All the features mentioned above are implemented in a code called ParallelNS. Using this code the verification of this approach was done on a large number of examples ranging from simple advection-diffusion …
-
Modeling and Analysis of Stably Stratified Wall-Bounded Turbulent Flows
Stably stratified wall-bounded turbulent flows have been drawing a great deal of research interest. The profound driver is the underlying physics in the topic that concerns many problems in industry as well as the natural environment, e.g., stratified mixing efficiency in topographically complex …
-
AN EXPERIMENTAL AND NUMERICAL STUDY OF HEATED EFFLUENT DISCHARGE IN A HORIZONTAL CROSS FLOW
… staggered grid arrangement. A universal wall function was employed in the program. The heat exchange between water-air interface was also considered. The numerical model was calibrated and validated against the experimental results and the agreement was generally good. The numerical …
-
RANS CFD Methodologies for a PWR Fuel Rod Assembly
… adopted steady RANS turbulence models with a wall function (high-y+ treatment) can produce; (i) accurate pressure losses across MVG and SSG spans, (ii) comparable mean axial velocity (MVG and simple support grid (SSG) spans), and (iii) comparable and RMS axial velocity fluctuation (MVG span) …
-
A Computational Model for Two-Phase Ejector Flow
… such as a mixing length turbulence model and wall function approximation, are discussed. Discretization of the equations by the control volume method and organization of the computer program is described. Code results are shown and compared to experimental data. It is shown that experimental …
-
Numerical Solution of Nonequilibrium Compressible Nozzle Turbulent Boundary Layers Using Laws of the Wall and Wake
… to reduce the grid requirements. The law of the wall and the law of the wake are used to resolve the inner part of the boundary layer to improve the execution time and relax the grid clustering requirements. A compressible defect stream function formulation of the governing equations assuming an …
-
Massively Parallel Spectral Element Large Eddy Simulation of a Turbulent Channel Using Wall Models
Wall-bounded turbulent flows are prevalent in engineering and industrial applications. Walls greatly affect turbulent characteristics in many ways including production and propagation of turbulent stresses. While computational fluid dynamics can be used as an important design tool, its use is …
Page 1 of 3