Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"Wall Panel"”.
-
Comparing Sandwich Wall Panel Shear Connector Testing Methodologies
Precast concrete sandwich wall panels (PCSWPs) have been used in the precast industry for decades due to their durability, rapid construction, and thermal efficiency. Shear connectors are used to connect the two wythes of concrete to allow composite action of the system. In order to design concrete …
-
The Experimental Use of Clay in a Wall Panel
… by using clay in an experimental way in a wall panel. Inventing ways to use tools which are easily available to teachers of all levels, relates this study to the ever-present problems of art education.
-
Analysis, design, and construction of tilt-up wall panel
… project. The floor slab must be designed for panel casting and to withstand the loading of the mobile crane which will be used to lift the panel. The crane capacity affects the panel size and weight. Proper curing and bondbreaker application are very important to reduce bonding and to ensure …
-
Wall Panel Optimization for Refugee Shelters in Germany: An AHP Study
… construction methods to be used in the shelter’s walls in order to improve the living conditions of the refugees and to ensure that the cost is acceptable to the German government. This thesis compares six existing wall panel products from China, which have the lowest cost on the worldwide market. …
-
Reuse of structural CLT elements: Assessing the impact of inter-element joint solutions on the reuse potential and environmental impact of a load-bearing wall panel
… impact of reusing a load-bearing CLT wall panel. A literature review is performed to analyse how joint solutions impact the reuse potential of a structural element. The limited amount of existing research on the topic was found to be too general to be of sufficient relevance for CLT …
-
Flexural bending of masonry infilled wall
… the behavior of the hollow clay tile infilled wall system under out-of-plane loading. The scope of this research consists of hysteretic testing of the wall test specimen constructed in the laboratory. The hysteretic testing was first performed on the steel test frame of the wall panel. The …
-
Out-of-plane behavior of unreinforced hollow clay tile masonry infilled wall panels
… of existing unreinforced masonry infilled walls under earthquake generated forces is of primary importance in seismically active zones. One of the seismic excitations is in the out-of-plane direction of the wall panel. The inertial out-of-plane forces due to the mass of the panel are …
-
Seismic Behaviour of Grouted Connections in Precast Concrete Panels
… design of buildings with precast concrete panels has received significant attention. Although this form of construction generally performed adequately in Christchurch, there were a considerable number of precast concrete panel connection failures. This observation prompted a review of more …
-
Energy-Saving Non-Metallic Connectors for Precast Sandwich Wall Systems in Cold Regions
… of buildings today are constructed with sandwich wall panels. Steel connections are most commonly used in these panels. The problem with steel is that it has a tendency to reduce the thermal resistance of the insulation. This project considers glass fiber reinforcing polymers (GFRP) and carbon …
-
Behavior of reinforced concrete walls with circular openings
<p>Reinforced concrete wall is one of the major components in a building system. It is subjected to different types of loads, such as gravity, wind, seismic load, etc. This thesis is part of a research project on water-filled reinforced concrete wall panels for energy efficiency and multi-hazards …
-
Finite element modeling of tornado missile impact on reinforced concrete wall panels
… of large tornado missiles on reinforced concrete wall panels. The analysis predicts the dynamic response of wall panels when impacted by a missile with a large contact area such as an automobile. The development and current status of tornado-generated missiles and their impact effects on concrete …
-
Passive Resistance of Abutments with MSE Wingwalls
… and two configurations of dense sand MSE wall confined backfills. Efforts were made to maintain the relative compaction of the backfills for each of the tests near the same value. The MSE wall panel arrangement was varied to determine the effect of different reinforcement configurations on …
-
Tilt up concrete wall panels
The design of tilt up concrete wall panels was studied in this paper. Design charts were developed to assist the engineer in the analysis of panels under load. Computer simulation of the concrete section was used to obtain the chart data. A computer study of the effect of a number of parameters on …
-
Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calicium Sulfoaluminate Cement Concrete and Conventional Construction
… that replacing reinforced conventional masonry walls with reinforced solid-core 3D-printed KCSC walls reduces EE, GWP, and EP by ca.12%, 55%, and 4% per unit volume and by ca. 55%, 77%, and 53% per unit compressive strength, respectively of the wall panel. On the other hand, replacing reinforced …
-
Shake table testing of hybrid wood shear wall system
… of a one-story full-scale hybrid wood shear wall system comprised of a post-tensioned CLT wall panel with Light-frame wood shear (LiFS) wall panels on each side. The testing was conducted at CSU's Engineering Research Center shake table. The objective of this study was to combine the …
-
Modelling of debonding mechanisms in externally bonded FRP sheets in RC shear walls for earthquake resistance
… response behaviour of reinforced concrete shear walls repaired or strengthened with externally boned FRP sheets under the reversed cyclic loading of earthquakes. The proposed computer model can accurately simulate the IC debonding mechanism under the two-dimensional stress state of the wall panel …
-
Μετακινήσεις σε έδαφος και κτίρια από την κατασκευή διαφραγματικών τοίχων
… known that the construction of a retaining wall affects the stress condition of the subsoil and may lead to displacements of the adjacent ground and the existing structures, the common design logic still ignores this stage during the design process, considering the walls “wished in place”. …
-
The effect of structural interactions due to floors, parapets and lintels on the lateral response of segmented cross laminated timber (CLT) shear walls
… structures constructed exclusively from CLT panels, which serve as both walls and floors, with CLT walls acting as both gravity and lateral load resisting systems. There are two main construction techniques for CLT buildings: platform-type and balloon-type methods. Platform-type construction …
-
Experimental and Simulation Approaches for Optimizing the Thermal Performance of Building Enclosures Containing Phase Change Materials
… (PCM) into building enclosures helps with wall thermal management as well as in reducing building energy consumption. Most older and some current PCM integration methods for building enclosures are impractical and create problems such as PCM leakage and evaporation, PCM water absorption, …
-
Lateral Resistance of Pipe Piles Near 20-ft Tall MSE Abutment Wall with Strip Reinforcements
… 2.9, 2.8, and 1.7 pile diameters behind an MSE wall which was constructed for this research to determine appropriate reduction factors for lateral pile resistance based on pile spacing behind the back face of the wall. The load induced on eight soil reinforcements located at various transverse …
Page 1 of 3