Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Wall attachment"”.

  1. An experimental study of switching in a Coanda wall attachment device

    … study was conducted to determine the effect of wall angle, wall offset, and power jet pressure on the control signal required to switch the flow in a Coanda wall attachment device. A stability parameter was defined as the ratio of the power jet pressor to the change in control pressure required …

    rice Repository record for An experimental study of switching in a Coanda wall attachment device (opens in a new tab)

  2. Studies of bistable fluid devices for particle flow control

    … directed toward the development of a bistable wall attachment Flip-Flop device which was capable of directionally controlling particle flow. The particles were transported by a fluid stream which under the influence of wall attachment. The dominant criteria in the development of the device was …

    portland-state Repository record for Studies of bistable fluid devices for particle flow control (opens in a new tab)

  3. Numerical Study of Turbulent Flow Characteristics of Wall-Attaching Synthetic Jets

    … flow characteristics and vortical structures of wall-attaching synthetic jets (WASJs) using improved delayed detached eddy simulations (IDDES). The simulations were conducted at a Reynolds number based on the average jet-exit velocity and nozzle diameter of Re = 565, with an actuation frequency …

    concordia Download PDF for Numerical Study of Turbulent Flow Characteristics of Wall-Attaching Synthetic Jets (opens in a new tab)

  4. Analyzing the flow characteristics of a fluidic oscillator

    … the provision of a continuously pulsed output. Wall attachment theory was used as the basis for design specifications. A plexiglas model was constructed and tested in the University of Tennessee Space Institute water tunnel. Qualitative appreciation of the flow characteristics was gained using …

    ut-knoxville Repository record for Analyzing the flow characteristics of a fluidic oscillator (opens in a new tab)

  5. A study of the dynamics of microbial competition for a single resource in a chemostat between reversible attachment to solid surfaces

    … two microbial populations exhibiting reversible attachment to the walls of a chemostat compete for a single resource is studied theoretically. Because of the cell's attachment to the walls, the environment is no longer homogeneous. The present study considers the case where the attached cells …

    njit Repository record for A study of the dynamics of microbial competition for a single resource in a chemostat between reversible attachment to solid surfaces (opens in a new tab)

  6. Multi-Physics Model of a Dielectric Barrier Discharge Flow Control Actuator with Experimental Support

    … to replicate emergent flow structures near a wall. These structures contribute to momentum transport that enhance the boundary layer’s wall attachment and provide for better flow control. An experiment was designed to validate the model predictions. The spectroscopic results confirmed the …

    vt Repository record for Multi-Physics Model of a Dielectric Barrier Discharge Flow Control Actuator with Experimental Support (opens in a new tab)

  7. Numerical Study of Nozzle Geometry Effects on Three-Dimensional Offset Synthetic Jets

    … flow characteristics, vortex dynamics, and wall interactions of three-dimensional offset synthetic jets using improved delayed detached eddy simulations (IDDES). Simulations were conducted at a Reynolds number based on the maximum jet-exit velocity and nozzle diameter (d) of Re_0 = 580, and …

    concordia Download PDF for Numerical Study of Nozzle Geometry Effects on Three-Dimensional Offset Synthetic Jets (opens in a new tab)

  8. Structural and functional studies on secreted glycoside hydrolases produced by clostridium perfringens

    … protein-protein interactions and cell wall attachment. The extent of the modularity is remarkable, with some enzymes containing up to eight ancillary modules. In order to help understand the role of carbohydrate-active enzymes produced by bacterial pathogens, this thesis will focus on …

    uvic Repository record for Structural and functional studies on secreted glycoside hydrolases produced by clostridium perfringens (opens in a new tab)

  9. Characterization Of Sortase And Its Effect On The Virulence Of Streptococcus Pneumoniae

    … surface proteins to the stempeptide on the cell wall peptidoglycan of Gram-positive bacteria. This work endeavored to characterize the various sortase enzymes and their effect on the virulence of Streptococcus pneumoniae. The genome of S. pneumoniae may encode up to four sortase enzymes. We found …

    uab Repository record for Characterization Of Sortase And Its Effect On The Virulence Of Streptococcus Pneumoniae (opens in a new tab)

  10. Investigating the Effects of Sparger Design in Column Photobioreactors

    … turbulence model is used to predict near-wall flow patterns. Average bubbles drag coefficient and average bubbles Nusselt number is defined in term of average bubble Reynolds number. Laboratory scale experimental studies are used to validate the predicted results from simulations. This …

    sdstate Repository record for Investigating the Effects of Sparger Design in Column Photobioreactors (opens in a new tab)

  11. Controlled generation, and acoustic-driven translation, of single microbubbles

    … (2%). Finally, ultrasonically driven bubble-wall interactions were examined under various conditions of channel flow (bubble size, flow rate, acoustic pressure amplitudes) to aid the development of microbubble removing systems. A comparison of the observations with theory revealed three …

    unsw Repository record for Controlled generation, and acoustic-driven translation, of single microbubbles (opens in a new tab)

  12. ULTRA-COMPACT BIOFILM REACTOR FOR CARBON AND NITROGEN REMOVAL

    … effluent channel having enough space to avoid wall attachment. Carbon removal in the UCBR was good. Using ethanol as the carbon source and at 20 kg/tn3-d COD loading rate, the effluent COD was only 20 mg/L. This represented more than 95% COD removal efficiency at 45 minutes hydraulic retention …

    nus Repository record for ULTRA-COMPACT BIOFILM REACTOR FOR CARBON AND NITROGEN REMOVAL (opens in a new tab) Download file for ULTRA-COMPACT BIOFILM REACTOR FOR CARBON AND NITROGEN REMOVAL (opens in a new tab)

  13. A LARGE EDDY SIMULATION STUDY OF THE EFFECTS OF WIND AND SLOPE ON THE STRUCTURE OF A TURBULENT LINE FIRE

    … convection number Nc is ≈1. The flame and plume attachment lengths (defined as the x-wall-distance downwind of the burner within the flame and plume regions, respectively) are found to fluctuate significantly in time. For the cases with slope the transition from the detached regime (equivalent to …

    maryland Repository record for A LARGE EDDY SIMULATION STUDY OF THE EFFECTS OF WIND AND SLOPE ON THE STRUCTURE OF A TURBULENT LINE FIRE (opens in a new tab)

  14. Investigation of a Biofilm Reactor Model with Suspended Biomass

    Biofilms are compact, sessile microbial communities that attach to surfaces in aqueous environments. In wastewater treatment, they are especially important for removal of phosphorus and nitrogen, which, if released into a receiving water body, can cause severe eutrophication. Mathematical models of …

    lund Repository record for Investigation of a Biofilm Reactor Model with Suspended Biomass (opens in a new tab) Download PDF for Investigation of a Biofilm Reactor Model with Suspended Biomass (opens in a new tab)