Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Wall configuration"”.
-
A theoretical investigation of a low-correction windtunnel wall configuration for airfoil testing
This thesis deals with anew approach to reduce wall corrections in high-lift airfoil testing, by employing symmetrically transversely slotted walls. The solid elements of the slotted wall are symmetrical airfoils at zero incidence, the spaces between the slats are nonuniform, increasing linearly …
-
An investigation of the theoretical and experimental aerodynamic characteristics of a low-correction wind tunnel wall configuration for airfoil testing
This thesis deals with a new approach to reduce wall corrections in high-lift airfoil testing, by employing two similar non-uniform transversely slotted walls. The solid elements of the slotted wall are symmetrical airfoils at zero incidence, and the spaces between the slats are non-uniform, …
-
Evaluation of Laser Power, Heat Treatment, and Wall Configuration of SS316L and ER70S-6 Structures Fabricated by Wire Laser Metal Deposition
… It then investigates the effects of laser power, wall configuration, and post-deposition heat treatment on the mechanical behaviour of W-LMDfabricated ER70S-6 mild steel and SS316L stainless steel bimetallic walls. Two wall configurations were evaluated: a conventional horizontal configuration …
-
Strut and wall interference on jet-induced ground effects of a STOVL aircraft in hover
… the aerodynamic interference of a proposed strut configuration and a wall configuration on the ground plane stagnation line. A simplified flat plate model representative of a generic jet-powered STOVL aircraft was used to simulate the LSPM. Cold air jets were used to simulate both the lift fan and …
-
Μακροχρόνια χορήγηση βιολογικών παραγόντων και αναπνευστική λειτουργία στην αγκυλοποιητική σπονδυλοαρθρίτιδα
… was the evaluation of the pattern of chest wall configuration during speech production, PFTs evaluation in these patients and to test if SNIP can be used alternatively to inspiratory muscle evaluation in these patients. 60 A.S. patients were included in this study and impedance …
-
Stability analysis of Hall and diagonal conducting wall MHD generators
… of the "Hall” and the "diagonal conducting wall" configurations of the MHD (magnetohydrodynamic) electrical power generator is considered. Of primary interest is the electrical current oscillations that may exist in the electrical load circuit that electrically connects the downstream end to …
-
Parametric study of timber shear walls
Timber shear walls comprise the vertical element of the lateral force resisting system in many low-rise buildings in North America. A typical shear wall consists of a solid panel product connected to a light timber frame with either a dowel-type fastener, such as nails, or elastomeric adhesives. …
-
Transpiration cooling for double-walled jet engine turbine blades
… of highly-dense film-arrays in a double-wall configuration which utilised both impingement jet cooling as well as external film protection. Three main benefits were found. More uniform and elevated film effectiveness protection on the external blade surface. Reduction in the maximum and …
-
Monotonic and Cyclic Performance of Long Shear Walls With Openings
… and window openings on long timber framed shear walls was the subject of this thesis. Four different wall configurations containing various openings and one control wall with no openings were tested to examine ultimate load capacity and stiffness. All walls were forty feet in length and contained …
-
Design Optimization of Safety Benches for Surface Quarries through Rockfall Testing and Evaluation
… affecting the rollout distance of a rock are wall configuration, rock dimensions, and rock energy. The test results were then compared to the Ritchie Criteria, Modified Ritchie Criterion, Ryan and Pryor Criterion, Oregon Department of Transportation design charts, and RocFall computer …
-
Hydroelastic stability and wave propagation in fluid-filled channels
… of waves in various fluid-filled elastic-walled channels. In Chapter 2 a linear temporal stability analysis is performed for various channel wall configurations, the results of which are compared to determine how different physical effects contribute to the stability. In Chapter 3 a linear …
-
Hydroelastic stability and wave propagation in fluid-filled channels
… of waves in various fluid-filled elastic-walled channels. In Chapter 2 a linear temporal stability analysis is performed for various channel wall configurations, the results of which are compared to determine how different physical effects contribute to the stability. In Chapter 3 a linear …
-
Development of the tolerant wind tunnel for bluff body testing
In conventional wind tunnels the solid-wall or open-jet test section imposes on the flow field around the test model new boundary conditions absent in free air. Unless a small model is used, the solid-wall test section generally increases the loadings on the model while the open-jet boundary …
-
Experimental Investigation of the Effect of Wall Adaptation on Flow Over a Cylinder in a Modernized Adaptive-Wall Wind Tunnel
A renovation of an adaptive-wall wind tunnel was completed to improve flow quality, automate data acquisition, integrate a three-axis traversing mechanism, and regain functionality of an adaptive-wall test section. Redesign of the settling chamber significantly improved flow quality, with the …
-
Hover Performance of a Two-Bladed Model Rotor in Confined Areas
… process was completed in the presence of four wall orientations including parallel, L-shape, and U-shape configurations spaced 1.5R from the vertical axis of the rotor hub as well as a U-shaped configuration spaced 2.36R from the rotor hub axis to match full-scale flight tests. Configurations …
-
Shake table testing of a two-story CLT platform building
… phases, with each phase testing a different wall configuration. The first two phases investigated the effects of different CLT panel aspect ratios (height:width) on the performance and behavior of the structure, with aspect ratios of 3.5:1 and 2.1:1 being tested respectively. The third phase …
-
Enhanced Ductility of Masonry Shear Walls Using Laterally Confined (Self-Reinforced) Concrete Block
… of improving the ductility of masonry shear walls by means of confinement. This proprietary method, referred to as Self-Reinforced Concrete Block (SR Block) employs a previously untried technique of molding lateral confining devices into concrete block. This internal reinforcement provides …
-
Elastic and inelastic scattering of fast neutrons in fusion reactor materials
… likely to be common components of fusion reactor wall configuration design. The measurements were performed using an associated particle time-of- flight technique. The 14 and 14.44 Mev neutrons were produced by the T(d,n} 4He reaction with deuterons being accelerated in a 150kev SAMES type J …
-
Analysis of bending stresses on horizontally corrugated steel silo wall panels
… to analyze the bending stresses on silo walls. The proposed model bin was twenty four feet high and sixteen by sixteen feet in square cross-section. The walls to be analyzed are made steel plates folded into horizontal corrugations. Design pressures and frictional forces were obtained by …
Page 1 of 2