Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 295 for “"Water contact angle"”.
-
ULTRA-LOW WATER CONTACT ANGLE HYSTERESIS SURFACES: INTERFACIAL DESIGNS TOWARDS PRACTICAL APPLICATIONS
Ultra-low water contact angle hysteresis (CAH<5°) is the key factor in achieving high-performance materials with various useful functions such as self-cleaning, anti-fouling, and anti-icing. However, the real implementations of such surfaces are considerably limited by the complexity in the …
-
An Evaluation of the Effects of the stiffness of Polycaprolactone on cell Proliferation
… in this study were self-designed to ensure that water contact angle measurements can be done with the PCL membrane mounted prior to in vitro studies. It has been found that by pre-treating the PCL membrane with 5M NaOH for a period of 3 hours could sufficiently lower its water contact angle and …
-
Green hydrophobic treatment for cotton fabrics
… resulted in hydrophobic cotton fabric with a water contact angle of 137.48o (±2.79). In addition, it was shown that the hydrophobicity lasted for 37 cycles of laboratory laundry washes. A second method involved using of amine-silica nanoparticles to increase the surface roughness of cotton …
-
Hydrophobic and hydrophilic substituted polyphosphazenes as scaffolds for liver cell growth
… FTIR, NMR, DSC, TGA, GPC, SEM, XRD and dynamic water contact angle. The polymers glass transition temperatures are in the range of a??18 to 0oC, and molecular weights in the order of 104 g/mol. GPC results also showed high polydispersity (1-1.5). An increase in the content of the methylphenoxy …
-
Effects of Superhydrophobic SiO2 Nano-particles on the Performance of PVDF Flat Sheet Membranes for Membrane Distillation
… were characterized extensively by SEM, FTIR, water contact angle, LEPw, surface roughness, pore size diameter and pore size distribution. The effect of the nano-particles on the membrane performance was then analysed. The nano-composite membranes showed increased surface pore diameter, …
-
Developing a Poly(Dimethylsiloxane) (PDMS)/SU-8 (Negative Photoresist) Hybrid Microfluidic System for Sensitive Detection of Circulating Tumour Cells
… (XPS), atomic force microscopy (AFM) and water contact angle are used to characterize and confirm surface modifications. In addition, we investigate the combined effects of surface properties on surface non-fouling performance to both live and dead cells. (3-aminopropyl)-trimethoxysilane …
-
Surface modification of cyclic olefin polymers using atmospheric pressure jet
… creates a surface wettability of less than 10°. Water contact angle (WCA), scanning electron microscopy (SEM), atomic force microscopy (AFM), and infrared spectroscopy (IR) were used to characterise the substrate surface properties. This study establishes atmospheric pressure plasma as a …
-
Effect of Different Implant Abutment Materials and Their Surface Characteristics on Human Gingival Fibroblasts Growth
… and compare it to the surface roughness and water contact angle of the different biomaterials. Material and methods: two conventionally milled materials, zirconia (MZr) and titanium (MTi) were compared to new additively manufactured silica nitride (AMSN) and zirconia (AMZR). Surface roughness …
-
Immobilization of Biomolecules on Polymer Scaffolds: A Novel Approach
… (XPS), FTIR, fluorometry, and static water contact angle measurements are used to study the nanoscale structure and properties of the interfacial, thin film-modified surfaces. Polymers based on 2-vinyl-4,4-dimethylazlactone (VDMA) are used as the platform onto which biomolecules are …
-
SYNTHESIS OF DURABLE SIO2 NANOPARTICLE COATINGS FOR SELF- CLEANING SOLAR PANEL SURFACES
… The superhydrophobic characteristic allows water to form droplets that easily roll off the surface, carrying away dust and other particles from the panel surface. The focus of the study is to improve the existing synthesis methods, which are often time consuming and complex to create …
-
Vacuum growth of N-octylphosphonic acid monolayer for low-voltage organic thin-film transistors
… monolayers using the atomic force microscopy, water contact angle measurement and Fourier transform infrared spectroscopy. The results show that the properties of the organic monolayer depend on its evaporation rate, growth temperature and the post-growth annealing and affect the performance of …
-
Adhesion of copper to Teflon® FEP and PFA surfaces modified by vacuum UV photo-oxidation downstream from Ar microwave plasma
… (1) an improvement in wettability as observed by water contact angle measurements; (2) surface roughening; (3) defluorination of the surface; and (4) incorporation of oxygen as CF-O-CF2, CF2-O-CF2 and CF-O-CF3 moieties for FEP and CF-O-CF2, CF2-O-CF2 and CF-O-CnF2n+i moieties for PFA. With long …
-
Photochemical modification of polyethylene terephthalate surface
… Surface analysis with XPS, ToF/SIMS, AFM, and water contact angle measurements confirmed the effectiveness of the approach, supporting the notion of the surface radical initiated processes.;A potentially useful anti-stain/soil coating was developed by grafting with a fluorocarbon species. …
-
Fine particle flotation
… to various degrees of hydrophobicity. Particle contact angles were determined using the film flotation technique, modified with the addition of a calibration curve of advancing water contact angle and critical surface tension. The film flotation technique was found to be suitable for the …
-
Fabrication of robust superhydrophobic aluminium alloys and their application in corrosion protection
… alloys from natural degradation by limiting water access and its surface interaction. Non-wetting properties of superhydrophobic surfaces are attributed to their low-surface energy, in combination with their surface microtexture. Several approaches based on tailoring a microtextured surface …
-
Multiply Complex, Non-Toxic, Anti-Fouling Surfaces Designed for Marine and Biomedical Applications
… (AFM), surface force spectroscopy, and static water contact angle to probe their surface properties. Because of the performance displayed in anti-biofouling testing for the terpolymer networks, a more industrially-relevant method for applying the networks was sought. Through the use of a spray …
-
Development of Titanium Dioxide Coating for Self-Cleaning Photovoltaic Panels
… conditions, including repeated wash-dry cycles, water immersion, falling sand, and dust deposition. Preliminary results highlight the coating's exceptional super-hydrophilic properties, with water contact angle measurements less than 10 degrees, indicative of TiO2's strong water affinity. The …
-
Creating long-range hydrophobic forces by coadsorption of ionic and neutral surfactants
… the mica surfaces do not jump into contact with each other, suggesting that the phase-separated amine renders the surface hydrophilic. Furthermore, the force measurements conducted at pH 10.1 show repulsive steric forces, which become stronger with increasing DAHClI concentration. …
-
ULTRAVIOLET ROLL-TO-ROLL NANOIMPRINT LITHOGRAPHIC FABRICATION OF FLEXIBLE POLYMER MOULDS
… INITIAL VALUE AFTER 10 IMPRINT CYCLES. ADVANCING WATER CONTACT ANGLE MEASUREMENTS FOUND A STABLE IMPROVEMENT OF 20? FOR RESI
-
Synthetic polymer-collagen composite hydrogel for drug delivery and tissue engineering
… the extent of successful crosslinking. Water contact angle and cell cytotoxicity study were also conducted to examine the biocompatibility of this material.
Page 1 of 15