Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Weak Interfaces"”.

  1. Finite-Element Simulation Studies for Consequences of Rock Layers and Weak Interfaces in Unconventional Reservoirs

    … properties between layers. In addition, the interfaces between layers vary in strength (friction and cohesion) and, when weak, they provide preferential directions to rock failure and fluid flow. Traditional rock mechanics modeling for hydraulic fracturing, wellbore stability, stress …

    tamu Repository record for Finite-Element Simulation Studies for Consequences of Rock Layers and Weak Interfaces in Unconventional Reservoirs (opens in a new tab)

  2. Hydraulic Fracture Height Growth in Laminated Shale Formations

    … be strongly affected by the horizontal bedding interfaces. Quantifying the hydraulic fracture propagation path and fracture geometries becomes much challenging with the existence of close-spacing bedding interfaces in the laminated formations. In this work, a comprehensive and non-intrusive …

    tamu Repository record for Hydraulic Fracture Height Growth in Laminated Shale Formations (opens in a new tab)

  3. Design, deformation mechanics, and failure of architectured polymeric materials

    … to predict rate dependent fracture of polymeric interfaces. Starting with a brief introduction in Chapter 1, the possibility of improving both the stiffness and energy absorption in interlocking, architectured, brittle polymer blocks is investigated in Chapter 3. The interlocking mechanism allows …

    mtu Repository record for Design, deformation mechanics, and failure of architectured polymeric materials (opens in a new tab)

  4. A pathway toward enamel-inspired damage-tolerant ceramics

    … (1) Can printing defects be used to mimic the weak interfaces observed in biological materials? If so, (2) what are the specific, quantitative features in the enamel microstructure that must be mimicked? And (3), can those observed structures be translated into a pattern printable with current …

    washington Repository record for A pathway toward enamel-inspired damage-tolerant ceramics (opens in a new tab)

  5. Performance Evaluation and Durability Studies of Adhesive Bonds

    … joints containing patterns of discreet localized weak interfaces created using physical vapor deposition of copper. In a DCB specimen tested under mode-I conditions, fracture energy within the patterned regions scaled according to a simple rule of mixture, while reverse R-curve and R-curve type …

    vt Repository record for Performance Evaluation and Durability Studies of Adhesive Bonds (opens in a new tab)

  6. Material Formulation and Process Optimization Towards Fabricating Robust 3D Printed Structures

    … physicochemical phenomena that lead to weak interfaces and structural warpage in material extrusion 3D printing. Polymeric feedstocks used for this manufacturing technique were manipulated through the incorporation of additives that alter the dynamics of the matrix during and after …

    utk-theses Repository record for Material Formulation and Process Optimization Towards Fabricating Robust 3D Printed Structures (opens in a new tab)

  7. The Effect of B2O3 Addition and Temperature Optimization on Mechanical Properties of Laminated Alumina and Yttria Stabilized Zirconia

    … alumina/YSZ laminate combination has optimally weak interfaces. The temperature with the highest flexural strength for the 0 mol% B2O3 samples was shown to be 1600°C while the temperature with the highest flexural strength for the 1 mol% and 3 mol% B2O3 samples were shown to be 1550°C.

    unt Repository record for The Effect of B2O3 Addition and Temperature Optimization on Mechanical Properties of Laminated Alumina and Yttria Stabilized Zirconia (opens in a new tab)

  8. Toughening mechanisms in weak matrix ceramic composites

    … matrix composites is closely related to the weak interface between fiber and matrix. The weak interfaces in composites have been provided by reducing the chemical bonding and the residual thermal stresses between constituents. A new way to introduce the weak interface by induced porosity or …

    must-thes Repository record for Toughening mechanisms in weak matrix ceramic composites (opens in a new tab)

  9. Operando tomographic characterisations of solid-state lithium metal batteries

    … Dendritic cracks are prone to be deflected by weak interfaces resulting from the dissimilar elastic modulus between layers and inhomogeneous microstructure within one layer.</p> <p><strong>Chapter 4</strong> comprehensively investigates the electro-chemo-mechanical interactions within …

    oxford Restricted access

  10. Time-Gated Fourier-Domain Optical Coherence Tomography

    … of view prior to detection. When strong and weak scattering interfaces exist across the sample depth range, the signal-to-noise ratio of the weaker scattering sites can be limited by the finite detector dynamic range in Fourier-domain OCT systems. By aligning the time gate temporal delay to …

    queens Repository record for Time-Gated Fourier-Domain Optical Coherence Tomography (opens in a new tab)

  11. Direct numerical simulation of the diffusive convection and assessment of its impact on Artic [Arctic] climate change

    … is controlled by the merging events in which weak interfaces gradually erode and ultimately disappear. To illustrate dynamics of these events, a theoretical framework - merging theorem - has been developed. It was numerically confirmed that the merging theorem predicts the time scale of …

    nps Repository record for Direct numerical simulation of the diffusive convection and assessment of its impact on Artic [Arctic] climate change (opens in a new tab)

  12. Anomalous Eutectic and Nanolaminated Composites of Mg-Al Alloys: Microstructure and In-Situ Compression Test

    … relationship between the layers demonstrated weak interphase interfaces. The dislocation entrapment by the weak interfaces improved the strength of nanolaminated composites. Moreover, the enhanced activity of dislocations in the β phase and suppressing the propagation of deformation …

    nebraska Repository record for Anomalous Eutectic and Nanolaminated Composites of Mg-Al Alloys: Microstructure and In-Situ Compression Test (opens in a new tab)

  13. New concepts in tailgate strata behaviour and implications for support design

    … variations in roof geology, strength of sliding interfaces, depth of cover, pre-mining horizontal stress magnitude and orientation, and strength and stiffness characteristics of standing supports was modelled. Laboratory investigations of a standing support product, the ‘Can’, at reduced scale …

    unsw Repository record for New concepts in tailgate strata behaviour and implications for support design (opens in a new tab)

  14. Accelerated Design Of Architected Materials With Geometric Heterogeneity For Enhanced Failure Characteristics

    … to extrusion-based additive processes (voids and weak interfaces) can be spatially arranged in a helical (Bouligand) pattern to produce complex crack patterns and enhanced energy absorption. Next, we show how spatial variations in fiber orientation (inspired by aorta) can be produced using direct …

    penn Repository record for Accelerated Design Of Architected Materials With Geometric Heterogeneity For Enhanced Failure Characteristics (opens in a new tab)

  15. Electric field manipulation of polymer nanocomposites: processing and investigation of their physical characteristics

    … of nanoparticles, and poor bonding and weak interfaces. The main objective of this dissertation is to improve the physical properties of polymer nanocomposites at low nanoparticle loading. The first step towards improving the physical properties is to achieve a good homogenous dispersion …

    tamu Repository record for Electric field manipulation of polymer nanocomposites: processing and investigation of their physical characteristics (opens in a new tab)

  16. Effect of Formation Discontinuity on Hydraulic Fracture Propagation in Shale Gas Reservoirs

    … to propagate straight through strongly bonded interfaces but merge and propagate along the weak interfaces. Finally, an intersection algorithm between hydraulic fracture and natural fractures was proposed and used in the self-developed, extended finite element method-based codes to study …

    unsw Repository record for Effect of Formation Discontinuity on Hydraulic Fracture Propagation in Shale Gas Reservoirs (opens in a new tab)

  17. Effects of mechanical anisotropic models on the prediction of mechanical stress barriers and hydraulic fracture geometry simulations

    … anisotropy as well as the fracturing dynamics of weak interfaces in rock-core samples. Tests conducted on Berea sandstone and Mancos shale quantify stress-induced anisotropy under confining and deviatoric stress paths. Using Tsvankin’s notation, in Berea sandstone and along a deviatoric stress …

    texas Repository record for Effects of mechanical anisotropic models on the prediction of mechanical stress barriers and hydraulic fracture geometry simulations (opens in a new tab)

  18. Processing, structure and properties of Al-matrix composites

    … were observed in mechanical properties with weak interfaces between poorly bonded extruded rods dominating fracture behaviour. Whiskers formed on polished surfaces of extruded Al-20vol%Sn and were monitored in real time by electron microscopy. Growth rates of up to 2.8nm/s were measured, …

    oxford Restricted access

  19. Unveiling the mechanical behavior of the rod-like microstructure in the radular teeth of cryptochiton stelleri

    … mineralized materials that are surrounded by a weak organic interface combine the stiff mechanical behavior of building blocks, like hydroxyapatite or aragonite, and the compliance of the organic surroundings. Unique mechanical properties (e.g. light density and toughness) distinguish …

    purdue-thes Repository record for Unveiling the mechanical behavior of the rod-like microstructure in the radular teeth of cryptochiton stelleri (opens in a new tab)

  20. A Coupled Three-Dimensional Hydraulic Fracture Propagation Model Accounting for the Effect of Bedding Layers

    … multi-layered rocks and pervasively distributed weak interfaces become the primary factors in determining the propagation pathway of fractures, which further influences the fracture height growth and fracture geometry. Few of hydraulic fracture propagation models enable us to quantitatively …

    tamu Repository record for A Coupled Three-Dimensional Hydraulic Fracture Propagation Model Accounting for the Effect of Bedding Layers (opens in a new tab)

Page 1 of 2