Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 335 for “"Wear Rate"”.

  1. Wear rate effects on strength of bone

    The wear rate sensitivity of hardness and strength is a key parameter for evaluating the surface integrity of a machined bone. The wear rate is presented as a parameter that accounts for the increase in strength, hardness, and decrease in toughness. The wear rate parameter is both a function of the …

    ttu Repository record for Wear rate effects on strength of bone (opens in a new tab)

  2. Wear Rate and Mechanism Maps for Stainless Steel at High Temperature

    … Materials selection for low friction, low wear in high temperature applications is a complex problem because of the many influence factors and coupling effects especially when friction and wear control methods like lubricating cannot be used. It was found that a compacted and sintered wear …

    gatech Repository record for Wear Rate and Mechanism Maps for Stainless Steel at High Temperature (opens in a new tab)

  3. Zinc pot bearing material wear rate as a function of contact pressure and velocity

    … objective of this project is to measure wear rate of submerged zinc-pot bearing materials as a function of contact pressure and velocity. A small laboratory size-testing machine was developed for this purpose. This machine measures the wear of bearing material samples, submerged in a cup …

    wvu Repository record for Zinc pot bearing material wear rate as a function of contact pressure and velocity (opens in a new tab)

  4. The effect of clinical polishing protocols on ceramic surface texture and wear rate of opposing enamel: a laboratory study.

    … a restoration [5, 6], increase friction [7] and rate of wear of the restoration [8] and opposing tooth structure [9], promote gingival inflammation [10], adverse soft tissue reactions [11], and the accumulation of stains and plaque on the surface [12-14]. Recent low fusing ceramics have …

    adelaide Repository record for The effect of clinical polishing protocols on ceramic surface texture and wear rate of opposing enamel: a laboratory study. (opens in a new tab)

  5. TOOL WEAR PREDICTION IN MACHINING A HYBRID FINITE ELEMENT AND EMPIRICAL METHODOLOGY

    Tool wear rate prediction using either empirical or finite element (FE) method has its respective advantages and drawbacks. Major drawbacks with empirical approaches are extensive experimental data are required to calibrate the empirical model constants and are bounded by the unique combination of …

    mcmaster Repository record for TOOL WEAR PREDICTION IN MACHINING A HYBRID FINITE ELEMENT AND EMPIRICAL METHODOLOGY (opens in a new tab)

  6. Παράγοντες που επηρεάζουν τη φθορά του πολυαιθυλενίου της κοτυλιαίας πρόθεσης στις ολικές αρθροπλαστικές του ισχίου

    Polyethylene wear in vivo is a multifactorial process influenced by many variables. This could explain the large variations in polyethylene wear rates among patients with total hip arthroplasty (THA).In this prospective study, we analyzed data from 200 THA performed between 1990 and 1998 in order …

    greece Repository record for Παράγοντες που επηρεάζουν τη φθορά του πολυαιθυλενίου της κοτυλιαίας πρόθεσης στις ολικές αρθροπλαστικές του ισχίου (opens in a new tab)

  7. The sliding wear of polymers against steel

    A laboratory wear testing facility has been developed to generate wear rate data for polymeric materials sliding at constant velocity against a hardened stainless steel base. The polymers investigated were ultra high molecular weight polyethylene (UHMWPE), ultra high molecular weight …

    cape-town Repository record for The sliding wear of polymers against steel (opens in a new tab)

  8. The Effect of Elevated Temperatures and Speed Upon the Wear of Mild Steel

    This thesis describes an elevated temperature wear test rig specially designed to study the friction, wear and heat flow between specimens as a function of load, speed and externally - induced ambient temperatures. The pin and disc specimens used for these experiments were made from EN8steel. The …

    aston Repository record for The Effect of Elevated Temperatures and Speed Upon the Wear of Mild Steel (opens in a new tab) Download PDF for The Effect of Elevated Temperatures and Speed Upon the Wear of Mild Steel (opens in a new tab)

  9. Wear of Particular Agricultural Tractor Tires for Different Field Operations in Africa

    … objective of this study was to analyze the wear rate of tractor R-1 radial tires under specific operating conditions. The specific objectives were to examine the wear rate of the tires (a) when operating under different soil conditions and (b) different field operations, (c) to develop …

    ottawa-retro Repository record for Wear of Particular Agricultural Tractor Tires for Different Field Operations in Africa (opens in a new tab)

  10. The lubricating properties of graphite at elevated temperatures

    The wear rate and the magnitude of friction of commercially available graphites in air have been shown to be dependent on the corrosion resistance of the graphite. In air the wear rate of graphite was observed to increase with increasing temperature up to 6000 C. A very rapid type of wear was found …

    salford

  11. Investigation of Electrotribological and Arc Erosion Behavior of Cu-15vol.%Cr in situ Composite

    … interfacial resistance, bulk temperature, and wear rate as a function of normal pressure, sliding speed, and electrical current. Microstructural change due to electrical sliding was studied to understand wear mechanisms. Cu-15vol.%Cr in situ composite was selected in this research because it …

    eiu Repository record for Investigation of Electrotribological and Arc Erosion Behavior of Cu-15vol.%Cr in situ Composite (opens in a new tab)

  12. Sliding wear of nitrided steels

    The unlubricated sliding wear behaviour of gas nitrided, plasma nitrided, and ferritic nitrocarburized BS970,905M39 (EN41B) steels was investigated systematically from an engineering point of view. Commercial nitriding processes were employed, and the wear studies were carried out using a …

    brunel Repository record for Sliding wear of nitrided steels (opens in a new tab)

  13. INVESTIGATION OF WEAR CHARACTERISTICS OF CONICAL DELRIN THRUST BEARINGS

    This study focuses on the wear rate in conical thrust bearings, which is responsible for field failures of stepper motors in optical disk drives (ODD). These bearings support the stepper motor worm shaft and consist of a steel ball supported in a polymer conical bearing cup. The tribological …

    maryland Repository record for INVESTIGATION OF WEAR CHARACTERISTICS OF CONICAL DELRIN THRUST BEARINGS (opens in a new tab)

  14. Understanding The Microstructure and Tribological Performance of CoCrFeNi-based High Entropy Alloys

    Due to their higher wear resistance compared to conventional alloys, high entropy alloys (HEAs) are now being considered as candidates for parts undergoing sliding contact during their lifetimes. While the engineering field has built some knowledge related to the performance of selected high …

    clemson Repository record for Understanding The Microstructure and Tribological Performance of CoCrFeNi-based High Entropy Alloys (opens in a new tab)

  15. A study of sliding wear behavior of heat treated 1060 steel with pure rolling pre-conditioning

    Wear behavior of heat treated 1060 steel under sliding or pure rolling conditions have been studied well but how pure rolling affect wear behavior needs clearer relationship. Therefore, more investigation needs to be done in order to generate a complete relationship. Vacuum heat treated 1060 steel …

    uiuc Repository record for A study of sliding wear behavior of heat treated 1060 steel with pure rolling pre-conditioning (opens in a new tab)

  16. The effects of rubber modification on friction and wear of epoxy networks

    … enhance its fracture toughness. The friction and wear of specimens modified with different amounts of elastomer were investigated in a pin-on-disk wear machine. An attempt was made to correlate the fracture toughness of the epoxy material to its fatigue wear rate for experiments in which a steel …

    vt Repository record for The effects of rubber modification on friction and wear of epoxy networks (opens in a new tab)

  17. Evaluating abrasive wear resistance of extruder tooling materials using the dry sand rubber wheel abrasion test

    … wheel abrasion test could be used as an accelerated test to evaluate candidate materials. Samples were tested in the heat treated condition and after surface modification by plasma ion nitriding. The range of materials tested included medium and high alloy steels and steel bonded carbide …

    vt Repository record for Evaluating abrasive wear resistance of extruder tooling materials using the dry sand rubber wheel abrasion test (opens in a new tab)

  18. The effects of the slip amplitude and lubricant type on the rate of false brinelling in roller bearings

    False brinelling is a wear phenomenon that occurs in stationary rolling element bearings. Vibrations from adjacent running machinery are transmitted to the stationary bearing via the machinery foundations, and result in relative motion between the rollers and the races. This results in wear scars …

    cape-town Repository record for The effects of the slip amplitude and lubricant type on the rate of false brinelling in roller bearings (opens in a new tab)

  19. Re-evaluating the use of dental wear as a tool for estimating age at death in British archaeological skeletal remains

    Dental wear is frequently used to estimate age at death in archaeological remains. However, the most widely cited dental wear ageing methods rely on underlying principles which have not been examined. Furthermore, the most widely cited method for estimating age concluded that a single dental wear …

    soton Download PDF for Re-evaluating the use of dental wear as a tool for estimating age at death in British archaeological skeletal remains (opens in a new tab)

Page 1 of 17