Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Web buckling"”.

  1. Web Buckling of Delta Girders

    … and close off the reentrant corners between the web and the compression flange. Plate girders are commonly used in highway and railroad bridges and in building frames where special loading conditions prevail or long spans are required. The existing codes and specifications dictate to a large …

    sdstate Repository record for Web Buckling of Delta Girders (opens in a new tab)

  2. Inelastic behavior of laterally supported steel beams subjected to cyclic loading

    … to the development of local, lateral, and web buckling. Lateral bracing is always found to improve the performance of a beam to some degree, but the improvement is not great in those cases in which web buckling is more critical than lateral-torsional buckling. When other factors are …

    rice Repository record for Inelastic behavior of laterally supported steel beams subjected to cyclic loading (opens in a new tab)

  3. Strength Evaluation of Wood I-Joist with Sinusoidal Web

    … stiffness ratio and thin--walled nature of the web, buckling or sudden loss of stability is a primary concern. Recently at West Virginia University a new structural wood composite panel has been developed using discarded veneer-mill residues. These panels were manufactured with a sinusoidal …

    wvu Repository record for Strength Evaluation of Wood I-Joist with Sinusoidal Web (opens in a new tab)

  4. Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames

    … to develop a design philosophy to predict column web failure moments based on a series of full scale tests (flush and extend end plates) carried out at the University of Abertay Dundee.<br/>Buckling of the column web was observed in a large number of the bolted beam-to-column connections …

    abertay Repository record for Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames (opens in a new tab) Download PDF for Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames (opens in a new tab)

  5. Bracing design requirements for inelastic members

    … designed bracing can substantially increase the buckling capacity of a member. A brace needs to satisfy both stiffness and strength requirement. Significant research has been done for the bracing requirements of elastic members. Relatively little work has been performed for the bracing design of …

    texas Repository record for Bracing design requirements for inelastic members (opens in a new tab) Restricted access

  6. Web crippling of high strength cold-formed steel beams

    … cold-formed steel beams subjected primarily to web crippling was investigated analytically and experimentally. In this study hat sections and I-beams, formed from five different types of high strength sheet steels commonly used in the automobile industry, were investigated under various loading …

    must-thes Repository record for Web crippling of high strength cold-formed steel beams (opens in a new tab)

  7. Performance Of Mechanical And Non-mechanical Connections To Gfrp Components

    … sections, local crushing under loading pads, web buckling and lip separation. However certain failure mechanisms observed from in-situ installations differ from these laboratory results, including behaviour of the connectors or system of connection, as well as the effect of cyclic and …

    ucf Repository record for Performance Of Mechanical And Non-mechanical Connections To Gfrp Components (opens in a new tab)

  8. Behaviour of steel and steel-concrete composite beams and beam-to-column connections at elevated temperatures

    … from that at ambient temperature. Local buckling of the beam flange outstands has been found to be highly significant in accelerating the development of catenary action in fire, since this action is reliant on hinges forming which may result from local buckling. Local buckling of the beam …

    unsw Repository record for Behaviour of steel and steel-concrete composite beams and beam-to-column connections at elevated temperatures (opens in a new tab)

  9. Development of a Shear Connection for a Portable Composite Bridge

    … to capture the possible effects of flange buckling, web buckling, and lateral torsional buckling of the steel plate girder. It was then confirmed that these local responses do not influence the performance of the proposed portable composite bridge system. A parametric study was also …

    waterloo Repository record for Development of a Shear Connection for a Portable Composite Bridge (opens in a new tab)

  10. Performance evaluation of FRP bridge deck under shear loads

    … out-of-plane shear, punching shear, and shear of web-flange junction. In addition, local deflection including web buckling of different FRP deck types has been evaluated and reported. FRP composites have been tested under a wide range of shear load conditions and their data has been compared with …

    wvu Repository record for Performance evaluation of FRP bridge deck under shear loads (opens in a new tab)

  11. Analytical and experimental study of investment casting with laser stereolithography models

    … process in investment casting with internally webbed laser stereolithography (SLA) patterns. Included in the consideration are the cracking temperature of the ceramic shell, the web link buckling temperature, and the glass transition temperature of the epoxy resin. The hypothesis is that shell …

    njit Repository record for Analytical and experimental study of investment casting with laser stereolithography models (opens in a new tab)

  12. Behaviour of unstiffened flush end plate beam-to-column connections in structural steelwork

    … Recommendations on future work on column web buckling, the effect of bolt heads and nuts, the sectional fillets and the effect of welding are also made which should be carried out before a comprehensive design procedure could be developed.

    abertay Repository record for Behaviour of unstiffened flush end plate beam-to-column connections in structural steelwork (opens in a new tab) Download PDF for Behaviour of unstiffened flush end plate beam-to-column connections in structural steelwork (opens in a new tab)

  13. Advancing GFRP Column Design: Strength, Effective Lengths, and Failure Modes

    … moduli, which leads to complexities in computing buckling capacities under local effects such as flange or web buckling and even torsional buckling under off-centered compression loading. Therefore, GFRP columns will behave differently under axial load than traditional steel and concrete …

    wvu Repository record for Advancing GFRP Column Design: Strength, Effective Lengths, and Failure Modes (opens in a new tab)

  14. Flexural resistance of longitudinally stiffened plate girders

    … use of longitudinal stiffeners in plate girder webs when the web slenderness D/tw is greater than 150. This practice is intended to limit the lateral flexing of the web plate during construction and at service conditions. AASHTO accounts for an increase in the web bend buckling resistance due to …

    gatech Repository record for Flexural resistance of longitudinally stiffened plate girders (opens in a new tab)

  15. THE INELASTIC SEISMIC RESPONSE OF STEEL PLATE SHEAR WALL WEB PLATES AND THEIR INTERACTION WITH THE VERTICAL BOUNDARY MEMBERS

    … boundary frame) and slender steel diaphragms (web plates) welded or bolted inside the boundary frame. The system resists lateral load primarily through tension field action in the web plates. Web plate forces are anchored by the boundary frame members. The Seismic Provisions currently require …

    washington Repository record for THE INELASTIC SEISMIC RESPONSE OF STEEL PLATE SHEAR WALL WEB PLATES AND THEIR INTERACTION WITH THE VERTICAL BOUNDARY MEMBERS (opens in a new tab)

  16. Strength Tuned Steel Eccentric Braced Frames

    … EBF by cutting out an opening in the link web. Furthermore, a new brace-to-link connection is proposed to bolt the brace member with the link in contrast to the conventional method of welding them. This new idea in continuous beam design was investigated to verify the stability of the tuned …

    portland-state Repository record for Strength Tuned Steel Eccentric Braced Frames (opens in a new tab)