Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Web cracking"”.
-
Post-Tensioning Duct Air Pressure Testing Effects on Web Cracking
… post-tensioned concrete bridges have experienced web cracking near the post-tensioning ducts during the construction process. The ducts were air pressure tested to ensure the duct can successfully be grouted for a bonded post-tensioned system. During the air pressure testing, tendon stressing and …
-
BEHAVIOUR CHARACTERISTICS OF FACE SHELL MORTARED BLOCK MASONRY UNDER AXIAL COMPRESSION
… <p>Regardless of the block size or shape,cracking of the webs is the expected failure pattern in face shell mortared blockwork and failure criteria attributing the dilation of mortar as the cause of failure are not applicable in this case. Since much reserve strength is available after …
-
Seismic Performance and Shear Strengthening of Precast Hollow-core Floors
… sustain critical damage in their unreinforced webs even when designed with modern detailing requirements. In light of the observed deficient performance, this dissertation aims to extend the understanding of the seismic performance of precast hollow-core floors, with a particular focus on web …
-
Experimental evaluation of the seismic performance of hollow-core floors and retrofits
… The tested floors exhibited an early onset of cracking in the unreinforced webs of the hollow-core units at 0.4% –0.5% inter-storey drift. With increasing drifts, the web cracks also tended to become shallower (i.e. <<45 degrees). Gravity-load testing of earthquake-damaged hollow-core units …
-
Influence of Web Geometry on Concrete Masonry Walls Subject to Out-of-Plane Loading
… to construct these walls must have an adequate web geometry as the webs are responsible for the transfer of internal shear forces. However, reducing the area of web that connects the face shells of a CMU provides an increased thermal resistance and a decreased CMU weight. The minimum allowable …
-
Shear transfer between precast prestressed bridge beams and in-situ concrete crosshead in continuous structures
… in-situ concrete nibs (concrete surrounding the web) can take this shear force without stirrups. c) There is no need either to project all the bars from the precast into the in-situ concrete or to prestress the connection transversely as a means of improving shear transfer. d) It was possible to …
-
Συμπεριφορά και ενίσχυση υποωπλισμένων τοιχωμάτων από σκυρόδεμα
… to have a greater impact on the extent of the web cracking, and thus on the energy dissipation values and the shear deformation values, and less on the bearing capacity of the walls. With regard to the strengthened walls, based on the experimental results of this thesis, both the FRP sheets and …
-
SHEAR BEHAVIOUR OF REINFORCED AND PARTIALLY PRESTRESSED STEEL FIBRE CONCRETE BEAMS
… Beam deflections, concrete and steel strains and cracking were monitored during the tests. The experimental study indicates that the stiffness of the beams after web cracking significantly improved with the addition of steel fibres, leading to enhanced shear strength and this trend is found to be …