Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 50 for “"Weibull Modulus"”.
-
Surface turbulence and the tensile properties, reproducibility and reliability of cast irons – a study of entrainment defects
… tensile strength of the QFM samples had a Weibull modulus 92\% higher than TFM, and 212\% higher than VTFM. The \%Elongation of QFM samples had a Weibull modulus 63\% higher than TFM, and 131\% higher than VTFM. Samples with low tensile properties were found to contain entrainment defects …
-
Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys
… the results analysed by Yate’s algorithm and Weibull statistical analysis to determine their relative effects. The most important defect in this research was the oxide film that had an effect on UTS and elongation of about 21 MPa and 0.9% respectively and on the UTS Weibull modulus and …
-
Volume effect of bone utilizing the staircase test method
… cortical bone could be determined based on the Weibull fatigue model in addition to the multiplication factors extracted by literature. The experimental research methods used in this study included a fully-reversible tensile compression loading applied to three volumes of 109, 383 and 1158 cubic …
-
Evaluation of the Mechanical Properties of Solid Oxide Fuel Cell Materials
… (proposed as a manifold material) exhibited a Weibull modulus of approximately 11. In addition, at 50°C and 3.5% moisture by volume, the strength displayed significant rate dependence with an SCG exponent of 17, indicating relatively high susceptibility of the material to slow crack growth …
-
The behaviour of double oxide film defects in the processing of liquid Mg alloys
… of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up …
-
Tensile and Flexure Strength of Unidirectional Fiber-Reinforced Composites: Direct Numerical Simulations and Analytic Models
… to the ordered composite) with increasing Weibull modulus. A modified Batdorf-type analytic model is developed and similarly extended to the case of non-uniform loading to predict the strength of composites under tension and flexure. The flexure model is found to be inappropriate for …
-
Defect imaging and analysis for predicting the reliability of ceramics
… in mechanical strength, described by the Weibull modulus was determined. Subsequently, fracture models plus the fractography were used to predict strength and compared with the results of mechanical testing. Applying high-throughput microscopy and image analysis on the same materials …
-
Cleavage fracture assessment incorporating strain gradient plasticity
… structural steels through the re-calibration of Weibull stress parameters based on the CMSG plasticity theory, and shows that the CMSG plasticity could strongly raise the magnitudes of Weibull stresses compared with those computed from the classical plasticity, while both constitutive models …
-
Understanding the influence of process parameters on the mechanical properties of alumina formed through lithography-based additive manufacturing
… have a grain size, characteristic strength, and Weibull modulus comparable to conventionally-processed alumina from a round robin study. Next, this work examines the impact of multiple LCM print parameters (including orientation, layer height, and energy) on the flexural strength, Weibull …
-
Engineered Alumina / Silicon Carbide Laminated Composites
… and improved mechanical reliability, in terms of Weibull modulus or minimum threshold failure stress, can be achieved by the engineering of the critical surface region in the ceramic component. Such effect can be realized by using a laminated composite structure with tailored sub-surface insertion …
-
Improving bonding strength of mild self-etching adhesive to ground and intact enamel by plasma treatment
… on enamel surface decreased a lot (p<0.05). Weibull analysis revealed that Weibull modulus for plasma-treated specimens was increased. SEM examination of the fracutred surface and enamel-adhesive interface revealed that plasma treatment improve interface quality, which could be attributed to …
-
Fracture strength of the SiC layer in TRISO coated fuel particles
… 8 hemispheres, the characteristic strength and Weibull modulus were 487 MPa and 4.0, respectively. Sensitivity analyses revealed that divot radius is the most important variable, followed by shell thickness and outside radius. The additional holistic results of this research are theoretical and …
-
Precursor gas comparison for the growth of silicon carbide fibers via laser chemical vapor deposition
… were qualitatively more delicate to handle. A Weibull analysis revealed that the fibers had a low Weibull modulus, which is an indication of a large and unpredictable variation of flaws within the fibers.
-
An evaluation of a silicon carbide/alumina ceramic composite for use in high temperature air heaters
… and x-ray mapping. Parameters such as Young's modulus, tensile and compressive strengths, porosity, and constituent distribution were determined to demonstrate any changes in the material due to exposure to high temperature. The strength of the material did not change significantly from the …
-
The strength and fatigue performance of 319 aluminum alloy castings
… tensile strengths of the filtered group had a Weibull modulus 2.4 times that of the unfiltered. Samples with abnormally low strengths were found to contain oxide film defects. These films had an approximately 5 times greater damaging effect on strength than that predicted by reduction in cross …
-
Micromechanical Testing of Pristine and Delithiated Single Carbon Fibres for Structural Battery Composite
… project aims to examine the tensile strength, modulus, and Weibull distribution of pristine and delithiated single carbon fibre. The tensile properties of 25 mm and 15 mm gauge length fibres were examined using a microtester. The fractured surface was investigated with SEM and EDX. The …
-
Tensile and uniaxial/multiaxial fatigue behavior of ceramic matrix composites at ambient and elevated temperatures
… from the tensile strength model suggest that the Weibull modulus, <i>m</i>, of the strength of the reinforcing fibers and the fiber/matrix interfacial shear stress both have significant effect on the strength and toughness of the unidirectional composite: a higher <i>m</i> value and a lower …
-
Fracture Behavior of Advanced Technology Fuels for Light Water Reactors
… an increased characteristic strength (≈ 20%) and Weibull modulus compared to CeO2, making them a more robust option for IT-SOFCs. In the context of this collective study, it was intended to provide proof of concept for the BOR test method for the testing of UO2. Chapter four details the work to …
-
Hyperbaric growth of carbon fibers by laser chemical vapor deposition
… of graphitic carbon deposits. However, the Weibull modulus among the LCVD grown carbon fibers is found to be high. Trends in mechanical properties with processing conditions and microstructure are observed.
-
Optimal design and freeform extrusion fabrication of functionally gradient smart parts
… properties including density, strength, Young's modulus, Weibull modulus, toughness, and hardness were examined. Microstructural evaluation was also performed to measure the grain size, and critical flaw sizes were obtained. The results indicate that the proposed method enables fabrication of …
Page 1 of 3