Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 86 for “"Weldment"”.

  1. Corrosion fatigue of a superduplex stainless steel weldment

    … in the absence of cathodic protection. One weldment was completed using the expensive and relatively slow gas tungsten arc (GTA) welding method. The other weldment was achieved using the GTA method for the root pass and subsequently filled using the cheap and relatively quick shielded metal …

    dcu Download PDF for Corrosion fatigue of a superduplex stainless steel weldment (opens in a new tab)

  2. Characterization of an HY-130 steel weldment by transmission electron microscopy.

    A wrought HY-130 steel weldment was studied to provide information about metallurgical differences in the weld heat affected zone (HAZ). Three GMAW welded areas were mapped and analyzed: heavily tempered, moderately tempered and untempered regions. Transverse sections were cut along the weld HAZ …

    nps Repository record for Characterization of an HY-130 steel weldment by transmission electron microscopy. (opens in a new tab)

  3. Modelling of weldment microstructure in non-age hardening Al-based alloys

    Aluminium-magnesium (5xxx) alloys have excellent properties such as: high strength to weight ratio, good formability, good corrosion resistance and good weldabiliy. This results in an increasing use of 5xxx alloys in the automotive industry. Fusion welding is a very important joining technique and …

    birmingham Download PDF for Modelling of weldment microstructure in non-age hardening Al-based alloys (opens in a new tab)

  4. Topology Optimization for Weldment Structures Using Bezier Curve-Based Cold-Formed Members

    … electric systems. Heavy equipment relies on the weldment design paradigm; systems are fabricated via the welding of a series of structural members like plate and hollow structural sections. Current SO efforts in this field generate topology by determining the optimal layout of these structural …

    queens Repository record for Topology Optimization for Weldment Structures Using Bezier Curve-Based Cold-Formed Members (opens in a new tab)

  5. Controlling Weldment and Metallurgical Properties Through Process Control in Rotary Friction Welding

    Weld quality in the context of process control and internal conditions is studied. Several different alloys are welded including plain carbon steel, high-temperature steels, and several traditional and advanced superalloys. Across all studied weld systems, the following conditions led to stronger …

    byu Repository record for Controlling Weldment and Metallurgical Properties Through Process Control in Rotary Friction Welding (opens in a new tab) Download PDF for Controlling Weldment and Metallurgical Properties Through Process Control in Rotary Friction Welding (opens in a new tab)

  6. Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data

    Welding occupies an important place as a major metal fabricating process and steel is the backbone of many an industry. Therefore it is of paramount importance to know the effect of welding on steel.

    byu Repository record for Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data (opens in a new tab) Download PDF for Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data (opens in a new tab)

  7. Finite element modeling of arc welded joint based on the experimental studies of the weldment

    … change and different regions are created in the weldment. The mechanical properties of welded joints change significantly around the heat affected zone (HAZ). So to predict stress distribution around the weld, these changes should be considered in the finite element model (FEM) of the welded …

    manitoba Repository record for Finite element modeling of arc welded joint based on the experimental studies of the weldment (opens in a new tab)

  8. Fundamental studies on the corrosion behavior of weldments in marine microbial environments

    … a better understanding of MIC in relation to weldments used in marine service. It was intended to establish MIC on a prototype weldment with a controlled set of conditions and microorganisms, use that set of conditions on a range of weldments in order to characterize their corrosion behavior, …

    ut-knoxville Repository record for Fundamental studies on the corrosion behavior of weldments in marine microbial environments (opens in a new tab)

  9. Microstructure Control and Correlation to Creep Properties in Grade 91 Steel Weldment After Thermo-Mechanical Treatments and an Fe-30Cr-3Al Alloy Strengthened by Fe2Nb Laves Phase

    <p>Type IV cracking in weldments of steel pipes after creep deformation is a concern in modern fossil-fueled power plants. Two possible methods for minimizing or eliminating Type IV cracking will be discussed. The first method alters the initial microstructure of typical Grade 91 steel base metal …

    utk-theses Repository record for Microstructure Control and Correlation to Creep Properties in Grade 91 Steel Weldment After Thermo-Mechanical Treatments and an Fe-30Cr-3Al Alloy Strengthened by Fe2Nb Laves Phase (opens in a new tab)

  10. Characterization of preheated and non-preheated HY-80 steel weldments by transmission electron microscopy

    Preheating HY-80 steel weldments is standard procedure, but it is an expensive and time consuming step in the fabrication of hull structures. The microstructures and hardness profiles of both a preheated (250 F--121 C) and a non-preheated (32 F--0 C) HY-80 steel weldment were studied to provide …

    nps Repository record for Characterization of preheated and non-preheated HY-80 steel weldments by transmission electron microscopy (opens in a new tab)

  11. Microbially influenced corrosion of austenitic stainless steel weldments

    … corrosion of austenitic stainless steel weldments in fresh water systems. The corrosion studies were carried out in the laboratory using a simulated Tennessee River water and in the field using a ground water which contained a high chloride concentration and a low dissolved oxygen …

    utk-theses Repository record for Microbially influenced corrosion of austenitic stainless steel weldments (opens in a new tab)

  12. The effect of water temperature on underbead cracking of underwater wet weldments

    … yet addressed the effect of water temperature on weldment microstructure. The environmental effects on Underwater Wet Welding using a shielded metal arc welding (SMAW) process are severe with higher quenching rates, porosity, slag inclusions and diffusible hydrogen levels. One of the problems …

    nps Repository record for The effect of water temperature on underbead cracking of underwater wet weldments (opens in a new tab)

  13. Effects of postweld heat treatment on the elevated temperature properties of 2 1/4 Cr-1Mo weldments

    … elevated temperature properties of 2 l/4Cr-lMo weldments subjected to these heat treatments after welding.</p> <p>The SA weldment fabricated for this study had a difference of chromium content (0.62%) between the base metal (2.07%) and weld metal (2.69%). The significance of this chromium …

    ut-knoxville Repository record for Effects of postweld heat treatment on the elevated temperature properties of 2 1/4 Cr-1Mo weldments (opens in a new tab)

  14. Combined Effects of Welding Residual Stress and Thermal Expansion in CWR

    … With a rail temperature deviation, the total weldment stress distribution undergoes a non-uniform change despite interacting with a relatively uniform thermal stress. This simulated peak of the daily thermal stress cycle impacts the rail head, web, and foot differently. The foot experiences a …

    south-carolina Repository record for Combined Effects of Welding Residual Stress and Thermal Expansion in CWR (opens in a new tab)

  15. The quantitative microstructural characterization of multipass TIG ultra low carbon bainitic steel weldments and correlation with mechanical properties

    … in HY steels). The strength of ULCB steel weldments can be correlated to the weld metals composition in a simple manner, however the toughness of the weldment seems to fluctuate in complex manner depending on the weld metal composition, weld power, and possibly the non-metallic inclusion …

    nps Repository record for The quantitative microstructural characterization of multipass TIG ultra low carbon bainitic steel weldments and correlation with mechanical properties (opens in a new tab)

  16. Mathematical modelling of creep in weldments using the Cosserat theory of plates and shells

    … performance of plates and pipes containing weldments is of particular importance, since the majority of plant failures are associated with weldments. One mode of failure identified by metallurgists is called type IV cracking, and this mode occurs close to the weld in material which has been …

    soton Download PDF for Mathematical modelling of creep in weldments using the Cosserat theory of plates and shells (opens in a new tab)

  17. Beam Program And Beam Column Program

    … "W" sections. Any "W", "M", "S" or "I" shaped weldment can be checked to determine if the section is adequate under the given conditions.

    marquette Repository record for Beam Program And Beam Column Program (opens in a new tab)

  18. Numerical modelling of pipeline construction / Alexander Dunstone.

    … the rate of diffusion are the timing of the weldment process, joint geometry, pre-heating and post-heating.

    adelaide Repository record for Numerical modelling of pipeline construction / Alexander Dunstone. (opens in a new tab)

Page 1 of 5