Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 153 for “"Weldments"”.
-
Creep Deformation of 316H Weldments
… model of creep deformation of multi-pass weldments is complicated by the presence of different material zones, namely, base metal, weld and the heat affected zone (HAZ). This thesis investigates the existence and extent of elastic-plastic and creep properties variation across a 316H steel …
-
Nonmetallic inclusions in HSLA steel weldments
… nonmetallic inclusions in HSLA steel multipass weldments utilizing optical microscopy and examination and EDX analysis in a SEM. The results of the study suggest that the mean diameter of inclusions in the final pass of a GMAW weldment in a 2.0 inch HSLA-100 plate is larger than the mean …
-
Measurement of Creep Deformation in Weldments
… properties across thick and thin section weldments that operate at high temperatures in UK advanced gas cooled reactor power plant (AGR). The new measurement system is applied to examine the creep behaviour of a thick section multi-pass welded joint made from Type 316H austenitic stainless …
-
Ultrasonic inspection of austenitic stainless steel weldments
… with the metallurgical structure of austenitic weldments resulting in ambiguity when interpreting reflections and at times in misinterpretation of defect positions. In this work, current knowledge of the structure of austenitic welds is outlined, and the influence of this structure on the …
-
Effects of preheat on weldments of NICOP steel
Shielded metal arc weldments of Armco Steel Corporation's NICOP class 3, 19mm (3/4 inch) plate, conforming to ASTM A710 grade A, were studied to provide information concerning the microstructure in the heat affected zone (HAZ) of weldments fabricated with and without preheat. Microhardness , …
-
Microbially influenced corrosion of austenitic stainless steel weldments
… corrosion of austenitic stainless steel weldments in fresh water systems. The corrosion studies were carried out in the laboratory using a simulated Tennessee River water and in the field using a ground water which contained a high chloride concentration and a low dissolved oxygen …
-
Fracture mechanics of weldments using finite element analysis
<p>The fracture mechanics analysis of weldments involves the use of a fracture criterion with the stress analysis of the weldment. It has been established that weldments are non-homogeneous anisotropic materials. Hence, a new fracture criterion is necessary to predict critical directions for crack …
-
Probabilistic Strain-Based Fracture Mechanics Analysis of Weldments
Welded joints are considered to be one of the most critical locations in structural components from a fatigue perspective because of high stress concentrations near the weld toe region, the presence of tensile residual stresses, and defects from the welding process. New welding techniques like …
-
The Fatigue of Weldments Subjected to Complex Loadings
Cruciform and double-strap lap weldments were fatigue tested under constant amplitude axial load and SAE Bracket Spectrum load conditions. For the cruciform weldments, fatigue cracks generally initiate at the root but may initiated the toe if higher bending stresses are induced by joint distortion. …
-
The GR3 Method for the Stress Analysis of Weldments
Determination of the fatigue life of a component requires knowledge of the local maximum fluctuation stress and the through-thickness stress distribution acting at the critical cross-section. This has traditionally been achieved through the use of stress concentration factors. More recently finite …
-
Improving the Fatigue Life of Weldments With Longitudinal Attachments
Fatigue life predictions made using the FEM results of this study were in good agreement with the experimental results. Cold-lap defects were predicted to eliminate the fatigue crack initiation life but to affect the fatigue crack propagation life very little.
Page 1 of 8