Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 752 for “"Welds"”.

  1. Welding Integrity of HSLA Welds

    … multi-pass high strength low alloy steel (HSLA) welds is presented here. High level of welding stresses (mainly tensile mode) are generated during the construction of pipelines which are due to non-uniform temperature distribution and cooling rates as well as using clamps during welding and …

    adelaide Repository record for Welding Integrity of HSLA Welds (opens in a new tab)

  2. Metallurgical control of electroslag welds

    Includes bibliographical references (pages 144-148).

    colo-mines Repository record for Metallurgical control of electroslag welds (opens in a new tab)

  3. Control and qualification of titanium welds

    … shielding gas was beneficial in obtaining good welds. Both heat input rate and cooling rate were found to affect the grain size of the weld, with the cooling rate being the dominant factor. The grain size exhibited a Hall-Petch effect on mechanical properties, such as the tensile properties and …

    brunel Repository record for Control and qualification of titanium welds (opens in a new tab)

  4. A failure criterion for fillet welds

    … a study of the strength of mild steel fillet welds subject to static loading, and the behaviour of flange welded beam-column connections under combined bending and shear. Tests are conducted on short welds in the as-welded and stress relieved conditions, and also on full-size beam-column …

    aston Download PDF for A failure criterion for fillet welds (opens in a new tab)

  5. Full field strain measurement in welds

    The intent of this study is to examine the stress-strain response of small material subsets in a weld subjected to some nominal loading using a full- field surface strain mapping technique. This process makes use of the digital image correlation program (VIC_2D) developed by the University of South …

    nps Repository record for Full field strain measurement in welds (opens in a new tab)

  6. Partial Joint Penetration Welds in Aluminum Structures

    … on partial joint penetration (PJP) groove welds; these welds can be very useful in the design of tubular truss-type structures. Engineers are finding that this is causing challenges in the design of competitive structures, given that some international design standards have less …

    waterloo Repository record for Partial Joint Penetration Welds in Aluminum Structures (opens in a new tab)

  7. Hot gas welds in unplasticised polyvinyl chloride.

    … on measured flaw sizes and failure stresses for welds confirmed the embrittlement of hot gas welded clear UPVC. Two approaches were tried to improve weld strengths: 1) to reduce the size and number of flaws and 2) to increase the toughness of the weld rod. An initial study indicated that changes …

    sheffield-hallam Download PDF for Hot gas welds in unplasticised polyvinyl chloride. (opens in a new tab)

  8. Behavior Of Fillet Welds In Skewed Joints

    … types of welded connections, such as groove welds. Several studies were performed on fillet weld of right dihedral angle, such as T-joints weld, to specify its capacity and failure mechanisms under different load directions. Nevertheless, the fillet weld strength analysis is based solely on …

    uab Repository record for Behavior Of Fillet Welds In Skewed Joints (opens in a new tab)

  9. Thermal expansion characteristics of stainless steel welds

    Includes bibliographical references.

    colo-mines Repository record for Thermal expansion characteristics of stainless steel welds (opens in a new tab)

  10. A fatigue design parameter for spot welds

    The development of fatigue cracks in galvanized low carbon and high-strength-low-alloy tensile-shear-spot weldments was investigated using the AT & T Microhmeter. The boundaries between the three stages of the fatigue life were determined based on the resistivity measurements of the Microhmeter. …

    uiuc Repository record for A fatigue design parameter for spot welds (opens in a new tab)

  11. A fatigue model for thermite rail welds

    The objective of this project was to examine the fatigue behavior of thermite-welded railroad rail and in particular the occurrence of fatigue defects in the rail head. A rail-head local-stress fatigue model (RAHELS) was developed to predict the type of rail-head defect that forms under a given set …

    uiuc Repository record for A fatigue model for thermite rail welds (opens in a new tab)

  12. Investigating Polycarbonate Welds made with Fused Filament Fabrication

    … been shown to preferentially fracture at the welds. To understand why failure localizes to the welds, and how the intrinsic strength of the welds develops, this dissertation combines optical characterization of the local geometry of the weld with in-situ infrared measurement of the weld …

    jhu Repository record for Investigating Polycarbonate Welds made with Fused Filament Fabrication (opens in a new tab)

  13. Fatigue of Aluminum Welds in Canadian Highway Bridges

    Aluminum is the most common metal in the world and its high strength to weight ratio, along with excellent corrosion resistance, can provide efficient solutions for the design and rehabilitation of highway bridge structures. A reduction in a structure’s self-weight, when using aluminum, is …

    waterloo Repository record for Fatigue of Aluminum Welds in Canadian Highway Bridges (opens in a new tab)

  14. Sulphide Stress Cracking in X80 Pipeline Steel Welds

    … operational cost. On the other hand, the girth welds for such pipelines are welded onsite, and simultaneously require strength overmatching of the weld joint, high fracture toughness, and low hardness, regardless of whether these mechanical properties are potentially at odds with each other. …

    waterloo Repository record for Sulphide Stress Cracking in X80 Pipeline Steel Welds (opens in a new tab)

  15. Micromechanical assessment of fatigue in airframe fusion welds

    … conditions of the different elements of the welds. Thereby a balance between aging, overaging, re-solutionising and re-precipitation has been identified across the heat affected zone.</p> <p>It is concluded that several fatigue crack initiation processes may occur within the welds, each with …

    soton Download PDF for Micromechanical assessment of fatigue in airframe fusion welds (opens in a new tab)

  16. Multi-Axial Fatigue Analysis of Thermite Rail Welds

    … the fatigue nucleation life of thermite rail welds. Also, axial tensile stresses resulting from cold winter weather are found to considerably accelerate the fatigue nucleation process, especially in the web-to-base fillet region.

    tamu Repository record for Multi-Axial Fatigue Analysis of Thermite Rail Welds (opens in a new tab)

Page 1 of 38