Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Wet Steam"”.

  1. Evaluation of Impulse Turbine Performance Under Wet Steam Conditions

    … efficiency due to moisture carryover in the steam line. The events of the plants which were operating at Fukushima Daiichi have been modelled using several computational codes. Instrument data is limited due to the loss of electrical power, so assumptions were necessary. To more fully …

    tamu Repository record for Evaluation of Impulse Turbine Performance Under Wet Steam Conditions (opens in a new tab)

  2. STEADY STATE MODELING OF WET STEAM IN A PIPING SYSTEM

    Current designs for steam piping systems are predicated on conservative deterministic design approaches to prevent the admission of moisture. This design approach may result in excess conservatism and larger, more inefficient components. During normal steady-state operations, the steam system …

    nps Repository record for STEADY STATE MODELING OF WET STEAM IN A PIPING SYSTEM (opens in a new tab)

  3. TRANSIENT COMPUTATIONAL FLUID DYNAMICS MODELING OF WET STEAM IN A PIPING SYSTEM

    The U.S. Navy’s current design of steam pipe systems onboard ships is based upon conservative estimates of moisture presence. To increase efficiency while maintaining a safe system, an analysis was done on one section of the piping system. The focus of this research was to determine the location …

    nps Repository record for TRANSIENT COMPUTATIONAL FLUID DYNAMICS MODELING OF WET STEAM IN A PIPING SYSTEM (opens in a new tab)

  4. Energieffektivisering genom Wet Steam Turbine - Ett system som omvandlar spillvärme till elektricitet

    … a ship through the implementation of a Wet Steam Turbine system. The technology is intended to be a part of a steam power system with the purpose of producing electricity from waste heat. A Wet Steam Turbine is a specially designed steam turbine that runs on wet steam and are therefore …

    chalmers Repository record for Energieffektivisering genom Wet Steam Turbine - Ett system som omvandlar spillvärme till elektricitet (opens in a new tab)

  5. Wet steam drying: Microwave-assisted droplet evaporation in open-cell ceramic foams

    In many energy and process engineering systems where fluids are processed, droplet-laden gas flows may occur. As droplets are often detrimental to the system’s operation, they are required to be removed. According to the state-of-the-art, industrial droplet removal is achieved through a sequential …

    qucosa-diss

  6. Numerical study of condensation effect on a steam ejector by wet steam model

    … of this system, the effectiveness of the steam ejector is the key factor to improve the overall performance. The complicated flow structure and mixing process within the steam ejector lead to a relatively low entrainment ratio. Many numerical studies based on the ideal gas assumption have …

    unsw Repository record for Numerical study of condensation effect on a steam ejector by wet steam model (opens in a new tab)

  7. Conceptual Design and Instrumentation Study for a 2-D, Linear, Wet Steam Turbine Cascade Facility

    The design of last stage low pressure steam (LP) turbines has become increasingly complicated as turbine manufacturers have pushed for larger and more efficient turbines. The tip sections of these LP turbines encounter condensing wet steam at high velocities resulting in increased losses. These …

    vt Repository record for Conceptual Design and Instrumentation Study for a 2-D, Linear, Wet Steam Turbine Cascade Facility (opens in a new tab)

  8. CFD modeling of a laboratory-scale supersonic ejector

    Laboratory-scale supersonic steam ejectors are being studied at Reykjavik University as part of a wider research project between Landsvirkjun and Reykjavik University. The broader project examines whether an ejector, a device without moving mechanical parts, can be used to connect high-pressure and …

    reykjavik Repository record for CFD modeling of a laboratory-scale supersonic ejector (opens in a new tab)

  9. Effect of Nozzle Exit Position on the Performance of Geothermal Ejectors Using a Parametric CFD Model

    … a computational fluid dynamics (CFD) model with wet steam formulation, focusing on the effect of nozzle exit position (NXP) on fluid entrainment. A parametric geometry and meshing approach was developed, allowing the NXP to be varied independently while keeping all other geometric features …

    reykjavik Repository record for Effect of Nozzle Exit Position on the Performance of Geothermal Ejectors Using a Parametric CFD Model (opens in a new tab)

  10. Local heat transfer coefficient and pressure drop of two phase steam in a vertical tube.

    In the early days of steam generation for power, saturated steam was used a great deal, but in order to achieve higher thermal efficiencies and reduce errosion of steam turbine blading the steam power industry rapidly extended steam conditions into the superheat region. Except for a small amount of …

    nps Repository record for Local heat transfer coefficient and pressure drop of two phase steam in a vertical tube. (opens in a new tab)

  11. PERFORMANCE ANALYSIS OF HELICAL SCREW EXPANDERS IN LOW TEMPERATURE ENERGY RECOVERY

    … an helical screw expander (HSE) operating on dry steam and wet steam. The robust structure of an HSE makes it a good substitute for turbine in severe operating conditions, such as wet steam. As such, an HSE can be a good candidate as prime mover in energy recovery from finite low temperature …

    nus Repository record for PERFORMANCE ANALYSIS OF HELICAL SCREW EXPANDERS IN LOW TEMPERATURE ENERGY RECOVERY (opens in a new tab) Download file for PERFORMANCE ANALYSIS OF HELICAL SCREW EXPANDERS IN LOW TEMPERATURE ENERGY RECOVERY (opens in a new tab)

  12. The Effects of Temperature and Pressure Variation on the Process of Cooking Foods

    … to which its surface is subjected and that wet steam generated in a closed vessel maintains a definite temperature-pressure relation. Under each condition of temperature and pressure the steam contains a fixed amount of available energy stored as heat and called, "Heat Content" the value of …

    sdstate Repository record for The Effects of Temperature and Pressure Variation on the Process of Cooking Foods (opens in a new tab)

  13. Coating Mechanical and Acoustical Design Considerations for Resistance to Solid and Liquid Particle Impact

    … in various applications e.g. aircraft and wet-steam turbine blades. In wet-steam turbine systems, erosion of the of leading edge turbine blades causes significant loss of efficiency. Despite the efforts that have been put into this field over the past 50 years, no one has solved the problem …

    whiterose Download PDF for Coating Mechanical and Acoustical Design Considerations for Resistance to Solid and Liquid Particle Impact (opens in a new tab)

  14. Development of Innovative Fire Suppression Systems and Risk Mitigation Approaches with Multiphase Flow Techniques

    … for fire suppression and waste heat powered steam ejector as a part of battery thermal management systems for fire risk mitigation were investigated. The aims of this thesis are: Developing innovative numerical tools using computational fluid dynamics (CFD) techniques to investigate the …

    unsw Repository record for Development of Innovative Fire Suppression Systems and Risk Mitigation Approaches with Multiphase Flow Techniques (opens in a new tab)

  15. HEAT TRANSFER COEFFICIENTS OF STEAM WATER MIXTURES

    … data on transfer coefficients as they relate to wet steam. Such lack of data was considered sufficiently important to be investigated. The experimental work of this thesis was conducted at the U. S. Naval Postgraduate School from March to June of 1953. The authors desire to express their …

    nps Repository record for HEAT TRANSFER COEFFICIENTS OF STEAM WATER MIXTURES (opens in a new tab)

  16. Preparation and properties of tantalum silicide films on silicon substrates

    … in the temperature range of 500 C-900 C in wet steam ambients. The oxidation time ranged from 0.5 to 1.5 hours. No oxide formation of tantalum was observed in the experiment because the surface layer of the mixed Ta-Si oxides prevented the further oxidation of tantalum silicide.

    njit Repository record for Preparation and properties of tantalum silicide films on silicon substrates (opens in a new tab)

  17. Testing and modeling of a two-phase ejector

    … ejector designed from single-phase ejector and wet steam ejector design methods. The poor performance indicates the design methods must be improved for two-phase ejectors. This research has begun the development of design methods for the two-phase ejectors and this research has developed models …

    vt Repository record for Testing and modeling of a two-phase ejector (opens in a new tab)

  18. Optimisation Of Shot Peening For 12Cr Steel In Steam Turbine Blade Applications

    … in thermal stations typically relies on large steam turbines. The corrosion resistant steel blades used in the last stage of a typical low pressure rotor set are approximately 1m long and experience high centrifugal loading during service. They operate in a wet steam environment, at …

    plymouth Repository record for Optimisation Of Shot Peening For 12Cr Steel In Steam Turbine Blade Applications (opens in a new tab)

  19. Water/Rock Experiments to 300ºC and Comparisons to Chemical Interactions in Active Geothermal Systems

    … or other acid gases during upflow or sampling of wet steam discharges. Field influences such as these would give rise to lower than actual reservoir pH's. Thus the offsets could indicate that some geothermal fluid pH's are more basic than commonly calculated and closer to those attained in …

    temple Repository record for Water/Rock Experiments to 300ºC and Comparisons to Chemical Interactions in Active Geothermal Systems (opens in a new tab)

Page 1 of 2