Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 228 for “"Wet etching"”.

  1. Photoelectrochemical Wet Etching of Gallium Nitride

    … this work, the technique of photoelectrochemical wet etching using KOH solutions has been developed for n-type GaN materials. Customized hardware and software have been assembled to carry out the etching. The etching characteristics were characterized over a wide range of process conditions. This …

    uiuc Repository record for Photoelectrochemical Wet Etching of Gallium Nitride (opens in a new tab)

  2. Fabrication Development Of Micron Scale Retroreflector Assays Using Wet Etching

    … to a negative tone resist and incorporating a wet etch in place of a liftoff step. We have eliminated low yield steps and have replaced them with a more repeatable fabrication sequence. The total number of processing steps have been reduced and repeatability has been improved, resulting in an …

    houston Repository record for Fabrication Development Of Micron Scale Retroreflector Assays Using Wet Etching (opens in a new tab)

  3. WET ETCHING OF P-GAN FOR CRYSTALLOGRAPHICALLY SMOOTH VERTICAL SIDEWALLS

    … as well as thermal performance. Trench etching is a key technology to achieve high-voltage trench-based vertical GaN devices; rough surfaces or sharp corners can lead to device preliminary breakdown due to the electric field crowding. The combination of inductively couple plasma and …

    cornell Repository record for WET ETCHING OF P-GAN FOR CRYSTALLOGRAPHICALLY SMOOTH VERTICAL SIDEWALLS (opens in a new tab)

  4. Improving Template-Based Nanomanufacturing of Carbon Nanotube Arrays Via Polishing Wet Etching Method

    … the pores and oxygen plasma and reactive ion etching (RIE) expose the tubes by selective etching. The same devices could be produced faster and cheaper by replacing oxygen plasma and RIE with mechanical polishing and wet etching. However, the biomedical utilization of CNT-based technology has …

    rit Repository record for Improving Template-Based Nanomanufacturing of Carbon Nanotube Arrays Via Polishing Wet Etching Method (opens in a new tab)

  5. Integration of Benzocyclobutene Polymers and Silicon Micromachined Structures Fabricated with Anisotropic Wet Etching

    … highly-corrosive, long, and high-temperature KOH etching process. Metal/BCB adhesion is a key parameter in this masking design. Adhesion of the BCB and metal mask was improved by cure management of the BCB before and after metallization, surface treatment of the BCB before metallization, and …

    maryland Repository record for Integration of Benzocyclobutene Polymers and Silicon Micromachined Structures Fabricated with Anisotropic Wet Etching (opens in a new tab)

  6. Fundamental Studies in Selective Wet Etching and Corrosion Processes for High-Performance Semiconductor Devices

    … more complex, the role of cleaning solutions and etching chemistries are becoming important in enhancing yield and in reducing defects. This thesis demonstrates successful formulations that exhibit copper and tungsten compatibility, and are capable of Inter Layer Dielectric (ILD) cleaning and …

    portland-state Repository record for Fundamental Studies in Selective Wet Etching and Corrosion Processes for High-Performance Semiconductor Devices (opens in a new tab)

  7. Formation of Aminosilane and Thiol Monolayers on Semiconductor Surfaces and Bulk Wet Etching of III--V Semiconductors

    … materials become practical. Unlike Si, dry etching of III-V semiconductor surfaces is believed to be difficult and uncontrollable. Therefore, new wet etching chemistries are needed. Si has been known to passivate by etching in hydrofluoric acid, but similar treatments on III--Vs are known to …

    arizona-thes Repository record for Formation of Aminosilane and Thiol Monolayers on Semiconductor Surfaces and Bulk Wet Etching of III--V Semiconductors (opens in a new tab)

  8. Fabrication of high aspect ratio (HAR) atomic force microscope (AFM) tips and nano-pillar arrays using pseudo-Bosch and wet etching

    … Here we present a novel method based on dry etching to fabricate HAR AFM tips with high throughput, and some important steps such as electron beam lithography and etching process during the fabrication will also be discussed in this work. The long-term goal of dry etching for our purpose is …

    waterloo Repository record for Fabrication of high aspect ratio (HAR) atomic force microscope (AFM) tips and nano-pillar arrays using pseudo-Bosch and wet etching (opens in a new tab)

  9. Metal-assisted chemical etching of 4H silicon carbide

    Metal-assisted chemical etching (MacEtch) is a wet etching method that can produce high aspect ratio nanostructures with minimal crystal damage. The MacEtch process has been demonstrated to overcome limitations of dry and wet etching in several materials, studied extensively since its discovery by …

    uiuc Repository record for Metal-assisted chemical etching of 4H silicon carbide (opens in a new tab)

  10. Fabrication and characterization of InP semiconductor ring lasers

    … racetrack resonator lasers (SRLs) via wet etching techniques. The method of choice for SRL fabrication is reported to be via dry etching. Dry etching is a complex, time consuming and expensive process which leaves relatively rougher surfaces and sidewalls compared to wet etching …

    ubc Repository record for Fabrication and characterization of InP semiconductor ring lasers (opens in a new tab) Download PDF for Fabrication and characterization of InP semiconductor ring lasers (opens in a new tab)

  11. Nano fabrication of silicon fins

    … semiconductors. The fins were produced by wet etching (110)-oriented silicon wafers. Silicon dioxide was deposited using plasma enhanced chemical vapor deposition for producing a hard mask. The silicon dioxide was patterned using photo- and electron-beam lithography for micro and nano-fins, …

    ttu Repository record for Nano fabrication of silicon fins (opens in a new tab)

  12. Optimization of Dry and Wet GaN Etching to Form High Aspect Ratio Nanowires

    … is studied through the use of dry and wet etching techniques. Specifically, dry etching is studied focusing on the effects of etching power, pressure, and the use of chloroform during the process. Wet etching of GaN nanowires takes the initial structures formed by the dry etch to create …

    rit Repository record for Optimization of Dry and Wet GaN Etching to Form High Aspect Ratio Nanowires (opens in a new tab)

  13. Enhanced Fabrication of Microdroplet Generator Nozzle Arrays: Optimizing KOH Etching for Microfluidic Applications

    … a critical fabrication step, anisotropic wet etching of pyramidal nozzles using a basic potassium hydroxide (KOH) solution. Given the integral role of nozzle geometry in device operation, high-precision techniques including Reactive Ion Etching (RIE), Deep Reactive Ion Etching (DRIE), and …

    wustl Repository record for Enhanced Fabrication of Microdroplet Generator Nozzle Arrays: Optimizing KOH Etching for Microfluidic Applications (opens in a new tab)

  14. Electrostatic transfer of graphene grown on copper foil and nanosoldering of carbon nanotube junctions

    … graphene grown on metal substrates involves wet etching steps in order to separate graphene from its metal growth substrates. During these wet etching steps, however, residues and wrinkles can be easily introduced in graphene and degrade its quality. By using electrostatic force instead, we …

    uiuc Repository record for Electrostatic transfer of graphene grown on copper foil and nanosoldering of carbon nanotube junctions (opens in a new tab)

  15. Study, Modelling and Implementation of the Level Set Method Used in Micromachining Processes

    … In particular, this document is focused on wet and dry etching processes, which are widely used in the micromachining process of Micro-Electro-Mechanical Systems (MEMS). A MEMS is a system formed by mechanical elements, sensors, actuators, and electronics. These devices have gained a lot of …

    upv Repository record for Study, Modelling and Implementation of the Level Set Method Used in Micromachining Processes (opens in a new tab)

  16. Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations

    … black phosphorus by a top-down lithography and etching approach. The wet etching process can etch selected regions of few-layer black phosphorous with an atomic layer accuracy. This etch method is deep-UV and e-beam lithography process compatible, and is free of oxygen and other common doping …

    ubc Repository record for Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations (opens in a new tab) Download PDF for Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations (opens in a new tab)

  17. Fabrication of TiNi thin film stents

    … films by magnetron sputtering, lithography and wet etching based on previous developments of shape memory alloy films. The results presented in this dissertation were never achieved before for any other research group. The TiNi thin films devices fabricated in this work have high potential for …

    cau-kiel Repository record for Fabrication of TiNi thin film stents (opens in a new tab)

Page 1 of 12