Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 36 for “"Wet strength"”.
-
The influence of press felt seam on paper wet strength
… seams. These seams can lead to variations in the wet and dry strength of paper compared to areas pressed without seams. This study investigates the impact of press felt seams on the wet strength of paper. An experimental apparatus is developed to apply pressure to the paper using a seamed press …
-
Additives Impact On Wet Strength And Size Development In Papermaking- Polyamide Epichlorohydrin (PAE), Alkenyl Succinic Anhydride (ASA) And Alkyl Ketene Dimer (AKD) Cases
… the efficiency of the paper making process. Wet strength agents, sizing agents, dry strength agents, fillers, retention aids, defoamers, dyes and pigments are common additives used in paper mills. Poor retention of wet strength additive such as PAAE (polyamide epichlorohydrin) and …
-
Oxidation, reduction and hydrolysis of wool keratin
… been followed by weight, nitrogen, sulfur, and wet warp breaking strength of the residual keratin. Acid degradation has been shown to be much greater at 100°C than at 25°C, to remove little of the sulfur, and to decrease the wet strength more rapidly than the weight or nitrogen. The residual …
-
The influence of paper surface chemistry on the activity of immobilized antibodies
… the field, it is important to understand whether wet-strength papers are suitable supports for antibodies. This thesis describes the influence of polyamide-epichlorohydrin (PAE) and polyvinylamine (PVAm), which are typical wet-strength resins, on antibody activity. Two kinds of antibodies were …
-
Adhesives with Controllable Degradability for Wet Cellulosic Materials
Cellulose wet adhesives are applied to enhance the wet strength of paper products by binding individual paper fibers together. However, the recycling of the wet strength paper is a challenge as the fibers are hard to re-disperse in water. This project demonstrates new strategies for developing …
-
Expanding the property space of cellulosic materials with multifunctional polymers
… the anionic charge of the fibers increased the strength properties of the paper and also water retention. In contrast, drying and then rewetting the fibers decreased the strength and water retention of the fibers. However, treating the anionically modified fibers with cationic polyelectrolyte …
-
Enzyme modified soy flour adhesives
… hydrolysis (DH) was an integral factor in both strength and durability. DH >18% was detrimental to the internal bond and thickness swell of medium density fiberboard (MDF) specimens with PF blends. MDF made with blends of hydrolyzed SF/PF with up to 20% soy solids did not significantly differ in …
-
Polyelectrolyte Adsorption onto Cellulose
… carboxyl content, and improving paper wet strength. A new framework was developed for analyzing adsorption of polydisperse polymers by expressing adsorbed and unadsorbed polymer on a common mass basis and applying mass-balance relationships. The method yields physically meaningful …
-
The Use of Polyvinylamine-supported TEMPO Oxidation in Wet-strengthening of Paper
<p>Paper wet-strength is very important in many situations. Traditional wet strengthening agents such as formaldehyde-based resins and polyamide- epichlorohydrin (PAE) resins have been criticized to be a source of organochlorine compounds (l). This research aims at developing an efficient and …
-
Effects of Chemical Additives on the Light Weight Paper
… to further improve tissue properties, such as strength, softness and water absorbency. Besides the efforts on characterizing facial tissue softness, this study focuses on tissue quality improvement through chemical means. The application of a wet strength resin, Kymene1500 and a debonding …
-
I Halogen as a finish for wool II Formaldehyde as a finish for wool III Comparison of three textile detergents
… ash, percentage of light absorbed, shrinkage, wet warp breaking strength, elongation at breaking load, and weight. The silks and wool were analyzed for total nitrogen and sulfate sulfur, the wool for total sulfur, and cellulose acetate for acetyl;The acetyl value of the cellulose-acetate rayon …
-
Engineering Nanocellulose Biointerfaces Toward Bioactivity and Strength
… surface behavior (adsorption and fouling) and wet strength of CNF in various structures. In addition to other surface analytical techniques, ultrathin films of CNF were investigated by surface plasmon resonance (SPR) and quartz crystal microbalance with dissipation monitoring (QCM-D). …
-
The effect of web structure on wet web runnability
The effect of paper structure on wet web strength properties was studied by running the re-wetted mill-made paper reels on a pilot runnability device at the dry solids contents (DSC) typical to the press section and the first part of the drying section. In order to run those reels with low DSC, a …
-
Development of Leaf-Inspired Functional Structures from Cellulose Nanofibers - Matrix Scaffolds for Solid-State Photosynthetic Cell Factories
… (PVA) yielded hydrogel matrices with high wet strength and good compatibility with photosynthetic cells. By establishing a surface-sensitive investigation setup using quartz crystal microbalance with dissipation monitoring (QCM-D), this thesis revealed that the photosynthetic cells are …
-
MICROGEL BASED ADHESIVES FOR WET PAPER STRENGTH
… microgel based adhesives so as to improve the wet paper strength. Colloidal microgel based adhesives were formed by coating carboxylated poly(Nisopropylacrylamide) (PNIPAM) microgels with polyvinylamine (PVAm). The characterization of the microgel base adhesives were performed by …
Page 1 of 2