Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Wet-lay"”.

  1. Wet-Lay Process - A Novel Approach to Scalable Fabrication of Tissue Scaffolds and Reinforcement Membranes

    … proposed and characterized a novel method called wet-lay process for the rapid fabrication of fibrous membranes for tissue scaffolds. Wet-laying is a method common to textiles and paper industry but unexplored for tissue scaffolds. Short fibers are first suspended in an aqueous bath and …

    uab Repository record for Wet-Lay Process - A Novel Approach to Scalable Fabrication of Tissue Scaffolds and Reinforcement Membranes (opens in a new tab)

  2. The Development of Compression Moldable Polymer Composite Bipolar Plates for Fuel Cells

    … Tech is based on material generated by a wet-lay process and uses polyethylene terepthalate (PET) or polyphenylene sulfide (PPS) as the binder, although PPS is mainly used. In order to reach sufficient conductivity for use in generating bipolar plates, the polymer is doped with high levels …

    vt Repository record for The Development of Compression Moldable Polymer Composite Bipolar Plates for Fuel Cells (opens in a new tab)

  3. Composite Construction of an Unmanned Aerial Vehicle

    … including CNC Plug Milling and Foam Cutting, Wet Lay-up, Tooling Manufacturing and Vacuum Assisted Resin Transfer Molding (VARTM - Infusion). Materials extensively used such as polyester resin/MEKP, gel coat, random directional matting, and carbon reinforcement are presented in an illustrated …

    maryland Repository record for Composite Construction of an Unmanned Aerial Vehicle (opens in a new tab)

  4. The design and construction of a shiplaunched VTOL unmanned air vehicle

    … A 1/2 scale model was built using composite wet lay-up techniques as a technology demonstrator and flight test vehicle. The engine system was tested but failed to produce enough static thrust for vertical takeoff. Research is continuing in the development of a propeller that will provide the …

    nps Repository record for The design and construction of a shiplaunched VTOL unmanned air vehicle (opens in a new tab)

  5. Durability of fiber-reinforced composite wrap system for the rehabilitation of concrete structures

    … x 8&inches; in dimensions) wrapped with 1 layer of glass fabric embedded in an epoxy resin matrix were used to simulate the field situation. Wet lay-up method was used to wrap the concrete cylinders where the epoxy also served the purpose of bonding the composite to the concrete. Specimens …

    wvu Repository record for Durability of fiber-reinforced composite wrap system for the rehabilitation of concrete structures (opens in a new tab)

  6. Characterization of composites fabricated from discontinuous random carbon fiber thermoplastic matrix sheets produced by a paper making process

    … cycle times and increased recyclability. The wet-lay papermaking process used in this study produces a quality, randomly oriented thermoplastic composite at low cycle times and simple production. The materials chosen represent high performance thermoplastics and carbon fibers.Short chopped …

    msu Repository record for Characterization of composites fabricated from discontinuous random carbon fiber thermoplastic matrix sheets produced by a paper making process (opens in a new tab)

  7. COMPOSITE BONE PLATE

    … match elastic modulus with bone was shown. The wet lay-up method was shown to be unable to provide consistent quality. It may be attractive on economic grounds for circular braided CF fabrics and more study is recommended.

    nus Repository record for COMPOSITE BONE PLATE (opens in a new tab) Download file for COMPOSITE BONE PLATE (opens in a new tab)

  8. Polyimide/silica nanoparticle-modified epoxy resin and kevlar/glass fiber-reinforced polymer matrix composites for potential application in commercial aircraft radomes

    … glass fiber polymer matrix composites via the wet lay-up and vacuum bagging techniques by utilizing epoxy resins modified with Polyimide (PI) and 2wt.% to 8wt.% of KH-550-modified silica nanoparticles. Dielectric constant tests revealed that the epoxy resin/Kevlar and epoxy resin/glass fiber …

    wichita-thes Repository record for Polyimide/silica nanoparticle-modified epoxy resin and kevlar/glass fiber-reinforced polymer matrix composites for potential application in commercial aircraft radomes (opens in a new tab)

  9. Textile Reinforced Concrete Structures - Bending tests of one-way slabs

    … with two manufacturing methods: clamped mesh and wet lay-up. Two different types of carbon fibre meshes, placed in two different orientations, and combined with two types of concrete were studied. Load-and deflection relation, maximum load, crack pattern and crack width were studied. To observe …

    chalmers Repository record for Textile Reinforced Concrete Structures - Bending tests of one-way slabs (opens in a new tab)

  10. Numerical models for the simulation of the cyclic behaviour of RC structures incorporating new advanced materials

    … confinement of RC columns, embracing them with wet lay-up CFRP sheets is one of the modern and superior techniques. The analytical relationship was proposed for uniaxial constitutive model of CFRP confined concrete under monotonic and cyclic loading. For this analytical approach, an extensive …

    minho-thes Repository record for Numerical models for the simulation of the cyclic behaviour of RC structures incorporating new advanced materials (opens in a new tab)

  11. Strengthening of timber beams using externally-bonded sprayed fibre reinforced polymers

    … FRP mats, or application of FRP via the wet lay-up process. However, a new technique developed at the University of British Columbia allows for the application of FRP in the form of a spray. Externally bonded Sprayed FRP (SFRP) is known to increase strength and energy absorption capacity …

    ubc Repository record for Strengthening of timber beams using externally-bonded sprayed fibre reinforced polymers (opens in a new tab) Download PDF for Strengthening of timber beams using externally-bonded sprayed fibre reinforced polymers (opens in a new tab)

  12. Feasibility Study of Design and Manufacturing of Composite Coil Springs

    … their axial direction, the best configuration to lay up the reinforcement material in a helical geometry was found to be in the ±45 degree with respect to the helix axis. In addition, a comparison study was performed between the fabricated composite coil springs and their alternatives: steel coil …

    sheffield-hallam Repository record for Feasibility Study of Design and Manufacturing of Composite Coil Springs (opens in a new tab) Download PDF for Feasibility Study of Design and Manufacturing of Composite Coil Springs (opens in a new tab)

  13. Improving the Quality of Laminates in Liquid Composite Molding Using Magnetic Compaction: Experiments and Process Model

    … liquid composite molding (LCM) processes such as wet lay-up vacuum bagging (WLVB) and vacuum assisted resin transfer molding (VARTM) in composite manufacturing, they have two major drawbacks. First, the fiber volume fraction of the composite parts made by LCM is lower than those made under an …

    oklahoma-thes Repository record for Improving the Quality of Laminates in Liquid Composite Molding Using Magnetic Compaction: Experiments and Process Model (opens in a new tab) Restricted access

  14. Development of unmanned aerial Systems for autonomous Launch, Docking and Recovery

    … using ABS, reinforced with carbon fiber rods and wet lay-up fabric, enabled lightweight yet structurally robust components. The design incorporated a turbine-based propulsion system with vectoring nozzle, modular payload bays, and folding wing mechanisms, while recovery was initially based on …

    sevilla Repository record for Development of unmanned aerial Systems for autonomous Launch, Docking and Recovery (opens in a new tab)

  15. Evaluation of CFRP-Concrete Bond Behaviour in Field Conditions: A Champlain Bridge Case Study

    … around the anchorage strips, where four layers of CFRP strips were used in the manual wet lay-up installation. In phase two, five different destructive/semi-destructive test methods were performed to investigate the effects of load orientation and test setup on bond behaviour and the …

    ottawa-retro Repository record for Evaluation of CFRP-Concrete Bond Behaviour in Field Conditions: A Champlain Bridge Case Study (opens in a new tab)

  16. Návrh uzlu křídlo-trup kompozitního letounu

    Diplomová práce se zabývá konstrukčním, pevnostním a technologickým návrhem uzlu křídlo-trup celokompozitového čtyřmístného letounu certifikovaného dle předpisu CS-23. Návrh je zaměřen na optimální využití prostoru, nízkou hmotnost a jednoduchou výrobu a montáž. Hlavním výstupem práce je výkresová …

    brno-tech Repository record for Návrh uzlu křídlo-trup kompozitního letounu (opens in a new tab)