Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"White layer"”.
-
Detecting White Layer in Hard Turned Components Using Non-Destructive Methods
… to adopt hard turning because of a defect called white layer. White layer is a hard, 1-5 쭠deep layer on the surface of the specimen that resists etching and therefore appears white on a micrograph. When aggressive cutting parameters are used, even using a new tool, white layer is expected. If more …
-
Mechanisms and modeling of white layer formation in orthogonal machining of steels
… alloying, and heat treatment of steels on white layer formation, (2) Prove/disprove that the temperature for phase transformation in machining is the same as the nominal phase transformation temperature of the steel, (3) Quantify the contributions of thermal and mechanical effects to white …
-
A finite element analysis of microcutting mechanics on surface integrity and white layer formation in hard machining
… penetration in the subsurface and the white layer thickness in hard machining AISI H13 and 52100 steel. The simulations results have been reasonably correlated with the experimental data.
-
Evaluation of a Maltodextrin Gel as a Partial Replacement for Fat in a High-Ratio White-Layer Cake Formulation
… each treatment, were evaluated in a high-ratio white-layer cake formulation. Two controls were used to compare to fat-replaced cakes: control A (100% fat with 100% sucrose) and control B (100% fat with 50% sucrose/50% HFCS-90), which closely matched the sugar system of the fat-replaced cakes. …
-
MICRO-FINISHING OF EDM MACHINED DIES BY ABRASIVE JET MACHINING
… to cracking was compared. The thickness of the white layer (taken to represent the functionally significant damaged zone) and the surface roughness Ra were quantitatively correlated to the nominal input energy. An empirical relationship was computed between the thickness of the white layer and …
-
Nitriding of aluminium-containing steels
… the gas mixture. The formation of the carburized layer depends on the internal compressive stress of nitrided layer. The size of the carbides is an impörtant factor in the formation of this layer. Larger: carbides are more stable and less likely to dissolve during nitriding. In bulk specimens, …
-
The effect of certain reagents on the nitrided case
… about 1911, at Watertown Arsenal, where the hard white layer formed on the bore of guns after repeated firing, was observed and studied, (Reference No. 1) Prior to this, the iron-nitrogen diagram and the effect of nitrogen as an impurity in iron end steel had been investigated. (Reference 12, page …
-
The fundamental relationship between tool wear, surface integrity, and fatigue in milling of difficult-to-cut alloys
… stresses were characterized. A phase transformed white layer was not observed in the context of concerned process parameters. The milled surfaces are characterized by the increased microhardness and high compressive residual stresses, which are beneficial for improving fatigue performance and wear …
-
The effects of acylation on the functionality and performance of cottonseed flour
… for 6 or 12 percent of the wheat flour in white layer cakes. The quality of these cakes was inferior to controls made with all wheat flour.</p>
-
Functional and cake-baking properties of egg white, bovine blood plasma and their protein fractions
… and cake-baking properties of egg white, blood plasma, and their protein components were characterized and compared. Prior to evaluating the baking properties of small quantities of all these proteins, a micro method for cake-baking was developed using a high-ratio white layer cake …
-
Processing-surface integrity-fatigue relationship in electrical discharge machining of nitinol shape memory alloy
… compositions, and mechanical properties of white layer and reveal the relationship between microstructure and properties of white layers of EDMed Nitinol. (4) Determine the effect of surface integrity on fatigue performance of EDMed Nitinol components. (5) Create a 3-dimensional finite …
-
Development and Improvement of Cerium Activated Gadolinium Gallium Aluminum Garnets Scintillators for Radiation Detectors by Codoping
… invented to create an intrinsic self-reflective layer serving as an alternative to the traditional external reflector used in radiation detectors. The intrinsic self-reflector is a white layer formed on Gd3Ga3Al2O12 crystals after annealing in a reducing atmosphere, and shows excellent …
-
Fundamental Understanding of Macro to Nano-scale Structures and Transformations in High Carbon Steel: Formation of Novel Ultrahard Surface using Waste Materials through an Innovative Hybrid Layering Approach
… also identifies the hybrid structure of the white layer in high carbon steel and demonstrates the combination of phase transformations, strain hardening, and grain refinement led to a hybrid microstructure. This comprehensive study could enable the understanding of the precise control of the …
-
Geochemical and Mineralogical Investigation into Causes of Color in Pearl and Shell Materials
… are calcite and dolomite present in the nacre layer of M. mercenaria shell. The EDS and Inductively Coupled Plasma-Mass Spectrometry (ICPMS) results indicate that the purple nacre layer of M. mercenaria contains lower concentration of calcium carbonate than the white layer. The Infrared and …
-
Economic Assessment of a Highly Pathogenic Avian Influenza Outbreak in Washington and Benton Counties in Arkansas
… types (Broilers, Breeders, Pullets, Turkeys, and Layers) to facilities using discrete non-uniform probabilities from known county-level poultry type distributions reported by USDA. A single facility is randomly infected with HPAI, and houses within the quarantine zone are identified based on a …
-
The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel
… the thickness and the hardness of the nitrided layer was independent to the carbon content in H13 steel. After 2 rounds of gas nitriding process, further nitriding seemed to have no significant effect on the hardness and thickness of the nitrided layer. Furthermore, the white layer was not …
-
Laser-based hybrid process for machining hardened steels
… and phase content in the surface and subsurface layers are analyzed using metallography and x-ray diffraction (XRD) respectively. Laser tempering produces distinct regions consisting of - a tempered white layer and a dark layer- in the heat affected subsurface region of the workpiece. The depth …
-
The Influence of Egg Production, Genetic Background, Age, and Housing System on Keel Bone Damage in Laying Hens
… using radiography. Furthermore, hens of five layer strains differing in phylogenetic background (brown versus white layer lines) as well as laying performance (high versus low performing) were kept in two different housing systems (single cages versus floor housing) and repeatedly …
-
Nano-multilayered Self-adaptive Hard PVD Coatings for Dry High Performance Machining
<p>In this research~ quaternary nitride nano-multilayered coatings of the form TiAICrN/MexN were comprehensively characterized. Based on this research principles which can be applied for guiding coating design were developed using the concept of self-adaptability.</p> <p>Comprehensive studies were …
-
Contributions to understanding the high speed machining effects on aeronautic part surface integrity
… hardening treatment resulted in deep hardened layers (2 mm) with related low compressive residual stresses which may affect the performance of the induction heat treated parts. A judicious selection of the finishing process that eventually follows the surface treatment may overcome this …