Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Wilkinson Power Divider"”.

  1. Wideband Wilkinson Power Divider For Uav Phased Array Radar

    … purpose of this project is to design a wideband Wilkinson power divider as part of an active phased array radar system for use in Unmanned Aerial Vehicle (UAV) applications. In order to comply with the entire system, the power divider was restricted in size, operating frequency, and bandwidth. …

    nodak Repository record for Wideband Wilkinson Power Divider For Uav Phased Array Radar (opens in a new tab)

  2. A Multi-Wilkinson Power Divider Based Complex Reflection Coefficient Detector

    … comparably cheap. Its design is based upon five Wilkinson Power Dividers which lends itself to be scaled down for implementation in on-chip, and other micro- and nano- scale systems. The accuracy and functionality of the device will be demonstrated through the use of S-Parameters measurements and …

    usf Repository record for A Multi-Wilkinson Power Divider Based Complex Reflection Coefficient Detector (opens in a new tab)

  3. Design, Analysis, and Construction of an Equal Split Wilkinson Power Divider

    The Wilkinson power divider is a well known device in the RF/microwave community used for splitting or combining signals. It is composed of simple transmission lines and a resistor, and takes advantage of the properties of quarter-wavelength transmission line sections to provide ideal power divider …

    marquette Repository record for Design, Analysis, and Construction of an Equal Split Wilkinson Power Divider (opens in a new tab)

  4. Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

    … a dual band branch line coupler and a dual band Wilkinson power divider are proposed using the novel dual band transmission line structure presented in the previous chapter. In chapter 4, Design of a tri band transmission line structure by extending the dual band structure is presented. The …

    unt Repository record for Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines (opens in a new tab)

  5. All-Passive Composite Right/Left-Handed (CRLH) Antenna Array for Sum and Difference Patterns

    … For hardware implementation, a dual-band Wilkinson power divider has been designed for in-phase output at 2.5 GHz and a phase difference of 180o at 1.8 GHz by injecting a CRLH unit cell in one of the output arms. In addition, microstrip power dividers are designed to implement the …

    rit Repository record for All-Passive Composite Right/Left-Handed (CRLH) Antenna Array for Sum and Difference Patterns (opens in a new tab)

  6. Metamaterial-Inspired Miniaturized Multi-Band Microwave Filters and Power Dividers

    … as well as dual- and triple-band equal-split power dividers/combiners. The dual-band filter is based on split ring resonators and double slit complemantary split ring resonators. A dual-band prototype three-stage Chebyshev filter, with a fractional bandwidth of 2% at 0.9 GHz and a fractional …

    utahstate Repository record for Metamaterial-Inspired Miniaturized Multi-Band Microwave Filters and Power Dividers (opens in a new tab)

  7. RF Power Circuit Designs for Wi-Fi Applications

    In the field of RF/Microwave Engineering, the Wilkinson Power divider is a passive device frequently used for splitting or combining signals. The power fed to the input port is equally or unequally split between N output ports and delivers better performance by achieving isolation between the …

    usf Repository record for RF Power Circuit Designs for Wi-Fi Applications (opens in a new tab)

  8. Novel Topologies Based Rf Filtering Components And Methodologies For Wireless Communication System

    … selectivity and wide rejection band, a filtering Wilkinson power divider, and balanced filters with fixed/reconfigurable center frequencies are proposed and successfully developed. In addition, an equation-based methodology is also first proposed and fully investigated to re

    south-carolina Repository record for Novel Topologies Based Rf Filtering Components And Methodologies For Wireless Communication System (opens in a new tab)

  9. Computer aided design of a broadband microwave power divider

    … to provide alternative design procedure for a power divider that has broadband characteristics. The Wilkinson power divider consisting of cascaded quarter wave sections is known to increase the bandwidth while maintaining high isolation and good match conditions at individual ports. Resistors …

    njit Repository record for Computer aided design of a broadband microwave power divider (opens in a new tab)

  10. Wideband and High-Performance Millimeter Wave Circuit Designs with SiGe BiCMOS Technology

    … circuit techniques for developing wideband and powerefficient millimeter-wave (mmWave) radio-frequency integrated circuits (RFICs). As the demand for broadband mmWave communication systems grows, designers face increasing challenges from parasitic capacitance, the skin effect, and design …

    gatech Repository record for Wideband and High-Performance Millimeter Wave Circuit Designs with SiGe BiCMOS Technology (opens in a new tab)

  11. A methodology for designing 2.45 GHz wireless rectenna system utilizing Dickson Charge Pump with Optimized Power Efficiency

    … of harvesting energy at 2.45 GHz RF signal to power any low powered device. Presented design uses a simple and inexpensive circuit consisting of four microstrip patch antennas, some zero-bias Schottky diodes, Wilkinson power divider and a few passive components. Circuit was fabricated on a 60 …

    waterloo Repository record for A methodology for designing 2.45 GHz wireless rectenna system utilizing Dickson Charge Pump with Optimized Power Efficiency (opens in a new tab)

  12. Wireless Power Transfer (WPT) System Design for Freely-Moving Animals for Optogenetic Neuromulation Applications

    Wireless power transfer (WPT) is currently the most efficient way for transmission of power from one port to another, that is popularly used in various applications.This technique can change the previous energy utilization methods in various applications such as electronic devices, implanted …

    unt Repository record for Wireless Power Transfer (WPT) System Design for Freely-Moving Animals for Optogenetic Neuromulation Applications (opens in a new tab)

  13. A Study of Direct Digital Manufactured RF/Microwave Packaging

    … lines is analyzed over a range of RF input powers, and linearity is confirmed over that range. Two IC packages are embedded into DDM printed circuit boards, and their performance is analyzed. The first is a low power RF switch, and the second is an RF front end device that includes a low …

    usf Repository record for A Study of Direct Digital Manufactured RF/Microwave Packaging (opens in a new tab)

  14. Wideband Circuits and Antenna Designs for mm-Wave/5G Phased Arrays

    … ultra-compact, low-loss, and wideband mm-Wave Wilkinson Power Divider (WPD). Careful study and analysis reveal optimal and necessary design parameters and equations in terms of the coupling and mutual inductances within the structure, yielding a device that is competitive with existing …

    gatech Repository record for Wideband Circuits and Antenna Designs for mm-Wave/5G Phased Arrays (opens in a new tab)

  15. Wideband directional couplers and power splitters

    Microwave quadrature couplers and out-of-phase power combiners/dividers are in many aspects crucial devices and are used in many microwave subsystems, such as mixers, modulators, antenna beam forming networks and antenna array feeds to name a few. In modern microwave circuits there is an increasing …

    chalmers Repository record for Wideband directional couplers and power splitters (opens in a new tab)

  16. A Wearable 1.6GHz Non-invasive Midfield Wave-Based Blood Glucose Sensor

    … promise, but the difficulty of transmitting power through tissue has degraded the sensing consistency and accuracy needed to reach the consumer market. This has been overcome with recent research in midfield wave power transmission at Stanford University, which has provided an opportunity for …

    calpoly Repository record for A Wearable 1.6GHz Non-invasive Midfield Wave-Based Blood Glucose Sensor (opens in a new tab)

  17. Microstrip Patch Electrically Steerable Parasitic Array Radiators

    … employs a corporate feed network consisting of a Wilkinson power divider with switchable delay line phase shifts, ring hybrid couplers, and achieves a gain of 12.1 dBi at boresight with ±20° scanning and low side lobes. This array successfully illustrates the cost savings associated with ESPAR …

    ucf Repository record for Microstrip Patch Electrically Steerable Parasitic Array Radiators (opens in a new tab)

Page 1 of 2