Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"Wind tunnel models"”.
-
Wing Deflection Analysis of 3D Printed Wind Tunnel Models
… producing small scale, low aerodynamic loading wind tunnel models, using FDM 3D printing methods, that are both structurally and aerodynamically representative in the wind tunnel. To verify the applicability of this approach, a 2.07% scale model of the NASA CRM was produced, whose wings were …
-
Design study of a centerplate mount for wind tunnel models.
A three-strut wind-tunnel model support system was being used with an electrical balance in the 3.5 by 5.0 foot Department of Aeronautics low-speed wind tunnel. The traditional method of image systems and alternate inverted mounting for the evaluation of aerodynamic tares was considered impractical …
-
Hot-Wall Experimental Technique for Prescribing Non-Uniform Temperatures on Hypersonic Impulsive Wind Tunnel Models
… temperatures on surfaces of hypersonic impulsive wind-tunnel models. The thesis is presented in three sections: (i) analyses of temperature profiles likely to occur on hypersonic vehicle surfaces, (ii) development of an experimental technique to generate desired, non-uniform temperatures, and …
-
Development of Methods for Improved Data Integrity and Efficient Testing of Wind Tunnel Models for Dynamic Test Conditions in Unsteady and Nonlinear Flight Regimes
… even above maximum lift. Current aerodynamic models are inadequate in predicting flight characteristics in the expanded envelope, such as rapid aircraft departures and other unusual motions. Unsteady flows of aircraft are of real concern. The ability to accurately measure aerodynamic loads …
-
Prediction and experimental evaluation of planar wing spanloads for minimum drag
… from theoretical predictions and experimental wind-tunnel measurements. The optimum spanloads were found using a Lagrange multiplier optimization method. They were designed with a prescribed wing-root bending moment constraint with and without incorporating viscous representation. Wind-tunnel …
-
Wind tunnel tests on a low-wing monoplane with propeller running
Various tests have been conducted on airplane wind tunnel models with an operating propeller in an endeavor to furnish the industry data as an aid in design and performance predictions. At the GALCIT, these investigations have comprised the material set forth in references 1, 2 and 4 .
-
A wind tunnel investigation of the hydrodynamic stability of a manned underwater station in ocean currents
… of an underwater station was studied using wind tunnel models. Rigid model force and moment coefficients were obtained for various orientations of the station in three dimensions. The unsteady motion of the station in cross currents was investigated with a dynamically similar model. Color 8 …
-
An experimental method for determing heat transfer distributions on blunt bodies at hypersonic mach numbers
… using slug calorimeters and Gardon gages. Wind tunnel tests were conducted at a nominal Mach number of 10 over a free-stream Reynolds number range from 0.31 x 10<sup>6</sup> to 1.04 x 10<sup>6</sup> based on the model diameter (5.80 inches). The data were compared with theoretical heat …
-
Knowledge engineering methodology investigations for intelligent hypertext manuals with a prototype aerospace implementation
… in conjunction with the size determination of wind tunnel models. This thesis presents hardware and software recommendations for implementing a turn-key intelligent hypertext manual.</p>
-
A Wind Tunnel Technique for the Identification of Ship Airwake/Rotor Downwash Coupling
A wind tunnel study is performed to analyze the interaction between ship airwakes and helicopter rotor downwash. This interaction is of interest to naval aviators and researchers as this phenomenon is thought to limit helicopter flight envelopes and increase the overall difficulty of maritime …
-
Investigation of Aspects of Aeroservoelastic State-Space Modeling on Active Flutter Suppression LQR Control Synthesis
… resources to meet this demand, involving wind tunnel models and modifications, and software development. A major step in aeroservoelastic analysis is the generation of the required state-space models. This thesis describes the development of a MATLAB code with such a capability. The code …
-
Investigation of the Flow Field in the Jack Rabbit II Mock Urban Environment Field Tests Using a 1:50 Scale Wind Tunnel Model
… of particular interest. Urban geometries create wind channels between buildings, along with particularly dangerous areas downwind of buildings, where near-stagnant flow is present. Furthermore, recirculation zones can be formed between buildings, trapping high concentrations of toxic gases at …
-
A Digital Pressure Sensor Data Acquisition System in a Wind Tunnel Model
Pressure measurements on wind tunnel models provide an important aid to overall aerodynamic analysis and design of aircraft and vehicles. Most pressure measurements in wind tunnels are made using analog pressure sensors with interfacing electronics that connect to an external data acquisition unit. …
-
RANS-CFD Based Assessment of Corrections Applied to the Measured Characteristics of Supersonic Configurations in a Low Speed Wind Tunnel
… in the University of Washington's Kirsten Wind Tunnel in an effort to improve current wind tunnel test corrections. The Star-CCM+ simulation-derived support corrections were validated using past wind tunnel models and support corrections.Simulations indicated that the interference effects …
-
Application of a differential displacement interferometer to wind tunnel model attitude measurements
<p>Wind tunnel simulations of the flight characteristics of aircraft require accurate measurements of the motions of the model, including roll and changes in pitch angle. There are several methods available for measuring such structural motion on a non-contact basis. Among these are methods …
-
Uncertainty Estimates and Prediction Interval Development for Internal Strain Gage Balance Calibration Systems
… practical issues faced by test engineers when wind tunnel models with internal strain gage balances are readied for test. Check loads are applied and the question that needs to be answered is whether or not the balance is reading within acceptable limits. These systems tend to be difficult to …
-
Simulation of Gust Generator-Induced Wind Tunnel Flow Fields
… was carried out of the flow characteristics of wind tunnel test section flow influenced by a gust generation system. The University of Washington's 3'x3' Low-Speed wind tunnel was modeled using high-fidelity Computational Fluid Dynamics (CFD) simulations and using easy-to-program and …
-
An investigation of wind tunnel carriage position airloads using flight test data as criterion
… experimental aerodynamic loads data obtained in wind tunnels. A recent study of two techniques used to obtain carriage position airloads data in wind tunnels has indicated disagreement between the test techniques. At present the lack of any data base has made it impossible to decide which wind …
Page 1 of 3