Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 100 for “"Wing Design"”.

  1. Integral aerodynamic-structural-control wing design

    The aerodynamic-structural-control design of a simplified wing and a forward-swept composite wing are studied. In the first example, the wing is modeled as a beam with a control surface near the wing tip. The torsional stiffness is the only physical property varying along the span. The aerodynamic …

    vt Repository record for Integral aerodynamic-structural-control wing design (opens in a new tab)

  2. Integrated aerodynamic-structural wing design optimization

    … for the simultaneous aerodynamic-structural design optimization of aircraft wings are investigated. These procedures include efficient methods for optimization and sensitivity calculations that are applied to two specific design examples. The first is a subsonic transport aircraft with a …

    vt Repository record for Integrated aerodynamic-structural wing design optimization (opens in a new tab)

  3. Application of computational fluid dynamics on smart wing design

    The instantaneous shape of the wing has a profound effect on the fluid dynamic forces it can generate. Visualization of the results obtained from the CFD code gives a better understanding of the happenings around a bending airfoil. The proposed Computational Fluid Dynamics (CFD) model provides …

    unlv Repository record for Application of computational fluid dynamics on smart wing design (opens in a new tab) Download PDF for Application of computational fluid dynamics on smart wing design (opens in a new tab)

  4. Benchmark Composite Wing Design Including Joint Analysis and Optimization

    A composite wing panel software package, named WING Joint OpTimization and Analysis (WINGJOTA) featuring bolted joint analysis, is created and presented in this research. Three areas of focus were the development of an analytic composite bolted joint analysis suitable for fast evaluation; a more …

    washington Repository record for Benchmark Composite Wing Design Including Joint Analysis and Optimization (opens in a new tab)

  5. Development of a modular MDO framework for preliminary wing design

    Multidisciplinary Design Optimization (MDO) is an area in engineering design which has been growing rapidly in terms of applications in the last few decades, aircraft design being no exception to that. The application of MDO to aircraft and more specifically, wing design, presents many challenges, …

    uvic Repository record for Development of a modular MDO framework for preliminary wing design (opens in a new tab)

  6. Solid modeling for rotary wing design at NPS with AutoCAD R13

    … reference for solid modeling and Computer Aided Design (CAD) tailored specifically for the Naval Postgraduate School's capstone helicopter design course, AA 4306. The goal is to present the use of AutoCAD R13 software as a central design tool throughout the conceptual design phase of the American …

    nps Repository record for Solid modeling for rotary wing design at NPS with AutoCAD R13 (opens in a new tab)

  7. A robust and reliability-based optimization framework for conceptual aircraft wing design

    … analysis and optimization framework for aircraft design is presented. Robust design optimization and Reliability Based Design Optimization are merged into a uni ed formulation which streamlines the setup of optimization problems and aims at preventing foreseeable implementation issues in …

    uvic Repository record for A robust and reliability-based optimization framework for conceptual aircraft wing design (opens in a new tab)

  8. New Wings for the T-38: A Computational Performance Evaluation of the T-38 Aircraft with a New Wing Design

    … way to improve the performance is to change the design of the wing. Using the Digital Performance Simulation aircraft-performance computer code, a T-38C performance evaluation sensitivity study was performed by parametrically varying the wing design. The computer model was a three degree of …

    ut-knoxville Repository record for New Wings for the T-38: A Computational Performance Evaluation of the T-38 Aircraft with a New Wing Design (opens in a new tab)

  9. Planform Characterization of a High Lift, Low Speed, Ground Effect Glider

    The main objective of this research was to design and develop a planform shape for a single passenger, unpowered, subsonic glider that relies on gravitational forces for momentum. The wing structure and aerodynamic shape optimized the benefits of near-ground flight (i.e. the increased lift and …

    wvu Repository record for Planform Characterization of a High Lift, Low Speed, Ground Effect Glider (opens in a new tab)

  10. Folding Solid-Membrane Wing Structure for a Micro Air Vehicle

    The design of a solid-membrane folding wing for use on a tube launched micro air vehicle (MAV), and experimental wind tunnel results of the wing integrated on an engineering MAV model are presented herein. Due to the sizing and performance requirements of the MAV, the wing must provide sufficient …

    wvu Repository record for Folding Solid-Membrane Wing Structure for a Micro Air Vehicle (opens in a new tab)

  11. Kinematic Design and Analysis of a Morphing Wing

    … optimize the flight characteristics of aircraft, wings must be designed for the specific mission an aircraft will see. An airplane rarely has one specific mission, and therefore is usually designed as a compromise to meet many flight objectives with a single wing surface. Large-scale shape change …

    vt Repository record for Kinematic Design and Analysis of a Morphing Wing (opens in a new tab)

  12. CM Scale Flapping Wing Of Unmanned Aerial Vehicle At Very Low Reynolds Numbers Regime

    … investigates the CM$-$SCALE Flapping Wing of Unmanned Aerial Vehicle (FWUAV) that can accommodate nacelles of the scale of current Unmanned Air vehicle (UAV) designs are complex systems and their utilization is still in its infancy. The improving design of unmanned aerial vehicle from …

    clemson Repository record for CM Scale Flapping Wing Of Unmanned Aerial Vehicle At Very Low Reynolds Numbers Regime (opens in a new tab)

  13. Formulation of a structural model for flutter analysis of low aspect ratio composite aircraft wings

    … toward a fully integrated multidisciplinary wing design synthesis by development of an appropriate structural model. The goal is to bridge the gap between highly idealized structural beam / aerodynamic strip models and the very detailed finite element and computational fluid dynamics, …

    vt Repository record for Formulation of a structural model for flutter analysis of low aspect ratio composite aircraft wings (opens in a new tab)

  14. Wing-Section Optimization for Supersonic Viscous Flow

    … Incorporation of flow viscosity effects in the design process of such a supersonic wing is currently under investigation. This may lead to more accurate problem formulations and, in tum, greater aerodynamic efficiency than can be obtained by the traditional, inviscid, linear theories. In this …

    odu Repository record for Wing-Section Optimization for Supersonic Viscous Flow (opens in a new tab)

  15. Effect of Low Velocity Impact on the Vibrational Behavior of a Composite Wing

    … the most important structural properties for a designer to consider, but it is often the most difficult to quantify or measure. A major concern for composite structures in the field is the effect of foreign objects striking composites because the damage is often undetectable by visual …

    calpoly Repository record for Effect of Low Velocity Impact on the Vibrational Behavior of a Composite Wing (opens in a new tab)

  16. Aeroelastic Tailoring of Composite Aircraft Wings with Uncertainty Quantification for Robust and Reliable Design

    … to aircraft structures have been `black metal' designs, which do not fully exploit the anisotropic properties of the composite materials. This somewhat conservative approach is at odds with the elastic tailoring capabilities offered by composite materials, which, by allowing modification of the …

    bristol Repository record for Aeroelastic Tailoring of Composite Aircraft Wings with Uncertainty Quantification for Robust and Reliable Design (opens in a new tab) Download PDF for Aeroelastic Tailoring of Composite Aircraft Wings with Uncertainty Quantification for Robust and Reliable Design (opens in a new tab)

  17. Constrained Aerodynamic Adjoint Optimisation of Supersonic Manoeuvre Wings

    Supersonic manoeuvring aircraft are designed to be efficient during aerobatic or high-load flight conditions at supersonic speeds, but are also usually required to also be efficient at other flight conditions. For example, transonic and subsonic cruising and manoeuvring. Aerodynamic flow around …

    whiterose Download PDF for Constrained Aerodynamic Adjoint Optimisation of Supersonic Manoeuvre Wings (opens in a new tab)

  18. Modeling and Characterization of Bioinspired Hybrid Flapping/Gliding Flight for Flapping Wing Air Vehicles

    … employ atmospheric phenomena. Flapping-Wing UAVs (FWUAVs) are as limited by their onboard battery as any other type of UAV, but because of their bio-inspired functionality are uniquely suited to utilize natural flight extension methods. Therefore, this PhD presents an analysis of the …

    maryland Repository record for Modeling and Characterization of Bioinspired Hybrid Flapping/Gliding Flight for Flapping Wing Air Vehicles (opens in a new tab)

Page 1 of 5