Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Wing crack"”.
-
Damage mechanics model for brittle failure of transversely isotropic solids : finite element implementation
A new continuum damage model, the wing crack damage (WCD) model, was developed for the analysis of brittle failure of transversely isotropic solids. Special attention was paid to the analysis of axial splitting under compression and tensile cracking under tension. In addition to the WCD model a …
-
Development of methods for modelling the failure of quasi-brittle materials
… by the growth and coalescence of the internal cracks, which adjoin to cause a macroscopic fracture with a considerable fracture process zone. The aim of this work is to develop methods for modelling the different phases of the failure process of quasi-brittle materials, starting from the …
-
Fault-related fracture systems in the Cambrian Eriboll Formation, Northwest Scotland : a field and petrographic study of a tight gas sandstone analog
… of centimeters to meters). I also investigate wing crack assemblages (secondary opening-mode fractures) that are locally associated with set C fractures. The assemblages accommodate small amounts of the distributed displacement (a few millimeters) adjacent to fault zones and are locally …
-
Computational modeling of the transition from damage to fracture in intrinsically anisotropic porous media
… govern the initiation and propagation of micro-cracks in mixed mode in crystalline and porous media, and to predict the transition from diffused micro-crack distribution to discrete macro-fracture. We first developed two constitutive laws that couple micro-mechanics and thermodynamics …
-
Evaluation of acid fracturing based on the "acid fracture number" concept
… break down the formation and to propagate a two-wing crack away from the wellbore. The acid reacts with the carbonate formation and this causes the etching of the fracture surfaces. After the treatment, the created etched surfaces do not close perfectly and that leaves behind a highly conductive …
-
Micro-mechanical Modeling of Brittle Materials under Dynamic Compressive Loading
… loads is the growth and coalescence of wing-cracks; therefore, the micromechanics model based on wing-cracks is the focus of this work. Based on a wing-crack RVE model, analytical closed-form solutions for the instantaneous effective anisotropic compliance (or stiffness) of a damaged …
-
Evaluation of Acid Fracturing Using the Method of Distributed Volumetric Sources
… (pad). This results in propagation of a two-wing crack away from the perforations with simultaneous dissolution etching of the created surfaces. If the created etched surface is non-uniform, then after the treatment ends and the fracture face closes, a high conductivity path may remain in the …
-
Fracture mechanics and subcritical crack growth approach to model time-dependent failure in brittle rock
Subcritical crack growth (SCG) takes place when a crack is stressed below its short-term strength. This slow fracturing process may lead to an accelerating crack velocity and to a sudden unstable failure event. SCG is thought to play an important role in long-term rock stability at all scales, …
-
Micro-macro modeling of chemo-mechanical damage and healing in rocks
… approaches to model the influence of micro-crack propagation on the accumulation of damage and irreversible deformation in salt rock. Consolidation tests and cyclic compression tests were conducted by our collaborators at Texas A&M University. Samples were taken out and sliced for …
-
Modeling fracture and deformation of brittle rock under compressive loading
Axial tensile cracks in a uniaxial or low confining stress, triaxial compression test follow a compression-parallel straight path for long distances, often through the whole length of the test specimen. When no transverse tensile stress is applied, as in the compression test, existing fracture …
-
THREE-DIMENSIONAL MODELING OF HYDRAULIC AND NATURAL FRACTURE INTERACTIONS AND ITS APPLICATIONS IN RESERVOIR STIMULATION
… of enhanced geothermal systems (EGS). Wing-crack propagation which starts at injection pressures below the minimum horizontal stress and continues at pressures slightly above the minimum stress may lead to the generation of NF networks in en echelon pattern. The analyses regarding the …
-
FRAGMENTATION, GRANULAR TRANSITION & IMPACT PERFORMANCE OF CERAMICS
… under impact loading exhibit a transition from a cracked solid to a granular medium. Appropriate representation of this transition to granular mechanics and the resulting initial fragment size and shape distribution in computational models is not well understood. The current work provides a …
-
Lifetime prediction for rocks
… by the growth of microstructual defects (microcracks). The numerical approach is based on linear elastic fracture mechanics. The numerical calculation scheme is implemented as a cellular automat, where each cell contains a microcrack with length and orientation following certain distributions. …
-
Mechanical properties and microcracking behaviour of heterogeneous rocks after high-temperature treatment
… predicting the mechanical properties, microcracking behavior, and strength evolution of heterogeneous rock under high-temperature conditions remains a key scientific challenge. This study investigates the mechanical behavior and microcrack evolution of heterogeneous rock, particularly …
-
Experimental analysis of semi-brittle deformation: Implications for deformation dynamics
… neither strain-rate nor stress is prescribed allowing the material properties to dictate whether deformation is accommodated by stick-slip or creep. A low yield stress (25 Pa) leads to creep dynamics in the absence of fractures. An intermediate yield stress (144 Pa) leads to the development and …