Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Wing weight"”.
-
Conceptual level FEM based wing weight estimation
Weight and its estimation have a vital impact in the aircraft design process from the very early phases. When the conceptual design configuration of an aircraft has been created, it should ensure that the estimated weight is sufficiently accurate to meet the performance and cost requirements. The …
-
Principal Component Regression for Construction of Wing Weight Estimation Models
… documents the lessons learned from fitting the wing weight data of 41 subsonic transports by three types of interpolation methods---least polynomial interpolation, radial basis function interpolation, and Kriging interpolation. The objective of this thesis is to develop an automatic procedure of …
-
Structural Optimization and Design of a Strut-Braced Wing Aircraft
… Optimization (MDO) by implementing truss-braced wing concepts in combination with other advanced technologies and novel design innovations. A considerable reduction in drag can be obtained by using a high aspect ratio wing with thin airfoil sections and tip-mounted engines. However, such wing …
-
Integrated aerodynamic-structural wing design optimization
… design optimization of aircraft wings are investigated. These procedures include efficient methods for optimization and sensitivity calculations that are applied to two specific design examples. The first is a subsonic transport aircraft with a composite forwardswept wing. The …
-
Optimum Spanloads Incorporating Wing Structural Considerations And Formation Flying
… drag optimum load distribution can produce wing weight savings that result in airplane performance benefits. For a group of aircraft flying in formation, non-elliptic lift distributions can give high induced drag reductions both for the formation and for each airplane. For single aircraft, a …
-
Aerostructural Analysis and Design Optimization of Composite Aircraft
… panel and layup design of a full aircraft wing. The design and analysis of composite structures for aircraft is not a stand-alone problem and cannot be performed without multidisciplinary considerations. A gradient-based aerostructural design optimization framework is presented that …
-
Uncertainty Quantification and Management on Aircraft Weight Estimation
Weight is a key element in aircraft design, having a major influence on its performance and being a common factor to all disciplines involved in the decision making process: aerodynamics, structural sizing, materials, loads, geometry, cost, manufacturing, etc. To ensure an optimal trade-off is …
-
Wing Optimization Technique Based on Vortex Lattice Theory
… optimizing the geometric parameters of a general wing with NACA 65-210 airfoil sections under a low speed aerodynamic regime. This will be completed by performing an aerodynamic analysis based on vortex lattice theory with the objective of satisfying a performance index function. This function …
-
Sizing Tool for Quadrotor Biplane Tailsitter UAS
… enable its further development, including: a QBT weight model, preliminary sizing framework, and vehicle analysis tools. The preliminary sizing tool presented here shows the advantage afforded by QBT designs in missions with aggressive cruise requirements, such as offshore wind turbine …
-
Multidisciplinary Shape Optimization of A Composite Blended Wing Body Aircraft
… fluid dynamics analysis tools and a structural wing weight tool, coupled based on the multidisciplinary feasible optimization architecture; aircraft geometry is modified in the optimization of the aircraft’s range or endurance. The developed tool is applied to three geometries: a hybrid blended …
-
High–lift actuation weight estimation using low–cost methods
… on the leading and trailing edges of their wings. The mass and size of these systems scales with the expected load the high–lift surfaces are deploy. The problem is that estimated maximum panel loads are not known to a high degree of confidence in the conceptual and preliminary phases of …
-
Minimize the aerodynamic effect of a strut on the wing
… the various emerging concepts, the Strut-Braced Wing (SBW) has shown great promise in enhancing aerodynamic efficiency while reducing wing weight. However, the implementation of new concepts and technologies also presents new challenges and limitations that must be addressed, particularly the …
-
Multidisciplinary Design Optimization of a Strut-Braced Wing Aircraft
… (MDO) to investigate the use of truss-braced wing concepts in concert with other advanced technologies to obtain a significant improvement in the performance of transonic transport aircraft. The truss topology introduces several opportunities. A higher aspect ratio and decreased wing thickness …
-
Domain-independent method for developing an integrated engineering design tool
… the preliminary design of jet transport aircraft wings based on the systematic engineering design approach is used to demonstrate the implementation of the method. The IEDT is embedded in Microsoft Excel 97 with links to other software and executable code. Examples of different implementation …
-
EBF3GLWingOpt: A Framework for Multidisciplinary Design Optimization of Wings Using SpaRibs
… optimization of generalized aircraft wing structure has been developed. The concept of curvilinear stiffening members (spars, ribs and stiffeners) has been applied in the optimization of a wing structure. A global wing optimization framework EBF3WingOpt, which integrates the static …
-
Aerodynamic analysis for hybrid electric distributed propulsion aircraft
… (HEDP) concept with under (UWN) and over-wing nacelle (OWN) configurations for large transonic transport aircraft. It examines the potential benefits of integrated UWN and OWN configurations including: (1) the effect of the fan in controlling rear adverse pressure gradients to maintain a …
-
Robust and Reliability-based Design Optimization of High Aspect Ratio Wings Including Geometric Nonlinearities
High aspect ratio wings (HARW) can provide higher lift-over-drag ratios leading to longer<br/>ranges through the resulting reduction in the induced drag. However, the increased structural<br/>flexibility inherent in HARWs renders them more susceptible to significant deflections under<br/>identical …
-
Fidelity assessment for model selection (FAMS): A framework for Initial comparison of multifidelity modeling options
… a use case involving FEM estimation of aircraft wing weight.
-
Multidisciplinary Design Optimization of Low-Noise Transport Aircraft
… capable of optimizing both a cantilever wing and a Strut-Braced-Wing (SBW) aircraft was developed. The framework employs aircraft analysis codes previously developed at the Multidisciplinary Design and Analysis (MAD) Center at Virginia Tech (VT). These codes have been improved here to …
-
Multidisciplinary Optimization and Damage Tolerance of Stiffened Structures
… structural optimization of a cantilever aircraft wing with curvilinear spars and ribs and stiffeners is described. The design concept of reinforcing the wing structure using curvilinear stiffening members has been explored due to the development of novel manufacturing technologies like …
Page 1 of 2