Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Wire grids"”.

  1. Reinforced Concrete Shear Walls with Welded Wire Grids as Boundary Element Transverse Reinforcement

    … cost and duration of construction. Welded Wire Reinforcement (WWR) is available in the construction industry as concrete reinforcement in the form of welded wire fabric (WWF) manufactured from relatively small diameter wires in comparison to the bar sizes typically used in structural …

    ottawa-retro Repository record for Reinforced Concrete Shear Walls with Welded Wire Grids as Boundary Element Transverse Reinforcement (opens in a new tab)

  2. A Comparative Study of the Temporomandibular Joint Area Using Laminagraphic and Panographic Surveys

    … dried human skull was used as the study subject. Wire grids were placed over the temporomandibular joint areas. The linear and angular distortion of the wire grids was measured with the plane of occlusion being serially tipped horizontally from minus fifteen degrees to plus fifteen degrees. …

    loma-linda Repository record for A Comparative Study of the Temporomandibular Joint Area Using Laminagraphic and Panographic Surveys (opens in a new tab)

  3. A numerical modeling study of the transmission line antenna for use as an HF combat survivable shipboard antenna

    … The ship and antennas are modeled using wire grids. The computer models are developed by the Numerical Electromagnetics Code (NEC). Average power gain, input impedance, and radiation patterns of driven antennas are presented.

    nps Repository record for A numerical modeling study of the transmission line antenna for use as an HF combat survivable shipboard antenna (opens in a new tab)

  4. Lateral Resistance of Pipe Piles Behind a 20-Foot-Tall MSE Wall with Welded-Wire Reinforcements

    … wall. The MSE wall was constructed using welded-wire grid and ribbed strip inextensible reinforcements. This paper focuses on four lateral load tests conducted on steel pipe piles located behind a 20-ft section of MSE wall reinforced with welded-wire grids. Results showed that measured lateral …

    byu Repository record for Lateral Resistance of Pipe Piles Behind a 20-Foot-Tall MSE Wall with Welded-Wire Reinforcements (opens in a new tab) Download PDF for Lateral Resistance of Pipe Piles Behind a 20-Foot-Tall MSE Wall with Welded-Wire Reinforcements (opens in a new tab)

  5. An investigation of near fields for HF shipboard antennas: surface PATCH and wire grid modeling using the Numerical Electromagnetics Code

    … models of the box, employing surface patches and wire grids, were evaluated. The monopole was positioned at the center, the edge, and at a corner of the box's top surface. Admittance and average power gain of the antenna were calculated. NEC results were examined and compared with experimental …

    nps Repository record for An investigation of near fields for HF shipboard antennas: surface PATCH and wire grid modeling using the Numerical Electromagnetics Code (opens in a new tab)

  6. An investigation of two broadband HF shipboard communication antennas

    … investigated for various geometry: (1) a 'multi-wire' whip antenna and (2) an inverted cone antenna. Both are modeled by using wire grids, in the Numerical Electromagnetics Code (NEC). Average power gain, input impedance and radiation patterns of most of the models are presented, in the frequency …

    nps Repository record for An investigation of two broadband HF shipboard communication antennas (opens in a new tab)

  7. Design of survivable shipboard HF mast antenna models using the numerical electromagnetics code

    … masts are modeled by using surface patches and wire grids. Six computer models of the given masts are developed by the Numerical Electromagnetics Code (NEC). Average power gain, input impedance, and radiation patterns of driven antennas are presented and the results between surface patch models …

    nps Repository record for Design of survivable shipboard HF mast antenna models using the numerical electromagnetics code (opens in a new tab)

  8. Near and far field comparison using wire-grid and patch models

    … of near field computations obtained using wire grid and surface patch method of moments models. Wire grid results were obtained using NEC , a point matching implementation, and MBC , a Galerkin implementation. The surface patch results were obtained using Junction . In the near field, a …

    concordia Download PDF for Near and far field comparison using wire-grid and patch models (opens in a new tab)

  9. Design of Submicron Structured Guided-Mode-Resonance Near-Infrared Polarizer

    … to reduce cost. For this purpose, a gold (Au) wire-grid transmission-type transverse-magnetic (TM) polarizer and a silicon (Si) wire-grid reflection-type TM polarizer, were designed using the guided-mode-resonance filter. The Au wire-grid TM polarizer of 700nm grating width and 1200nm grating …

    arkansas Repository record for Design of Submicron Structured Guided-Mode-Resonance Near-Infrared Polarizer (opens in a new tab)

  10. The development of calibration and adaptive filtering procedures for neuromagnetic studies of human visual function

    … function. Gradiometer calibration using straight wire grids is examined and optimal grid configurations determined, given realistic constructional tolerances. Simulations show that for gradiometer balance of 1:104 and wire spacing error of 0.25mm the achievable calibration accuracy of gain is …

    aston Download PDF for The development of calibration and adaptive filtering procedures for neuromagnetic studies of human visual function (opens in a new tab)

  11. The penetration of electromagnetic fields through open and loaded apertures.

    … and non-carbon composite materials, and metallic grids and meshes. The composite samples were fabricated to study the effects of fibre orientation, conductivity, sample lay-up, and degree of hybridization on the electromagnetic shielding properties. Wire grids and meshes were fabricated to study …

    ottawa-retro Repository record for The penetration of electromagnetic fields through open and loaded apertures. (opens in a new tab)

  12. Terahertz reflectarrays

    … intensively required for constructing terahertz wireless networking or imaging systems. Low-loss terahertz reflectarray antennas thus promise attractive potential for enabling the manipulation of terahertz radiation. This thesis will first introduce the background of terahertz technology, …

    adelaide Repository record for Terahertz reflectarrays (opens in a new tab)