Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Wishbone"”.
-
Κινηματική και δυναμική ανάλυση ανεξάρτητης ανάρτησης τύπου Double wishbone σε αγωνιστικό όχημα ανώμαλου δρόμου
Το παρόν τεύχος αποτελεί την Διπλωματική εργασία που εκπονήθηκε στο ΠΜΣ: ‘Σχεδίαση και Κατασκευή Συστημάτων Αγωνιστικών Οχημάτων’ του Εθνικού και Καποδιστριακού Πανεπιστημίου Αθηνών και αναφέρεται στη κινηματική και δυναμική ανάλυση μιας ανεξάρτητης ανάρτησης με διπλά ψαλίδια για όχημα ανώμαλου …
-
Evaluation of synchronization methods in multi-clock domain systems
… In this project, the bridges are applied to the Wishbone bus in which two clocks differs from each other, in frequency and phase. Each clock is separately applied for Wishbone Master and Wishbone Slave thus acts as two as different clock domain systems w.r.t signals that are propagated between …
-
Design and 3D Printing of Down-scaled Passenger Vehicle Chassis
… chosen for the models are MacPherson and double wishbone for the front suspensions and trailing arm multi link suspension and a live axle for the rear. These models were designed in Catia V5 and then 3D printed in a scale of 1:5 and assembled together with some off-the-shelf components such as …
-
Analysis of stress and geomechanical properties in the Niobrara Formation of Wattenberg field, Colorado, USA
… have been acquired. This area includes the Wishbone section, where 11 horizontal wells have been drilled, and is the focus of dynamic reservoir characterization. The primary goal of this research study is to investigate relationships between geomechanics, stress and fractures. Determining …
-
Constructing a Niobrara reservoir model using outcrop and downhole data
… reservoir model of Niobrara formation in the Wishbone Section of the DJ Basin. 2) Use the geologic static model to construct a compositional model to assess performance of Well 1N in the Wishbone Section. 3) Compare the modeling results of this study with the result from an eleven-well …
-
Kineto-Dynamic Analyses of Vehicle Suspension for Optimal Synthesis
… kinematic responses of quadra-link and double wishbone types of suspensions are evaluated using the single-wheel kinematic models. Laboratory measurements were performed and the data were applied to demonstrate validity of the 3- dimensional kinematic model. A sensitivity analysis method is …
-
Control of Low-Speed Turbulent Separated Flow Over a Backward-Facing Ramp
… tests in the water tunnel indicated that wishbone vortex generators in the forward orientation shed horseshoe vortices; wishbone vortex generators oriented in the reverse direction and doublet vortex generators shed streamwise counterrotating vortices; a spanwise cylinder located near the …
-
Application of time-lapse seismic shear wave inversion to characterize the stimulated rock volume in the Niobrara and Codell reservoirs, Wattenberg field, CO
… and shear wave splitting. The study area is the Wishbone Section within Wattenberg Field, CO, which is owned and operated by Anadarko Petroleum Corporation and contains eleven horizontal wells that vary in spacing and completion methods. Shear seismic data sets were acquired over this section …
-
Model Reduction for Vehicle Systems Modelling
The full model of a double-wishbone suspension has more than 30 differential-algebraic equations which takes a remarkably long time to simulate. By contrast, the look-up table for the same suspension is simulated much faster, but may not be very accurate. Therefore, developing reduced models that …
-
Velocity, attenuation, and microseismic uncertainty analysis of the Niobrara and Montney reservoirs
… wells within a one-square mile section (Wishbone Section). A baseline survey was recorded immediately after the wells were drilled, another survey after stimulation, and a third survey after two years of production. A robust layer stripping method is used to quantify 4D velocity and …
-
Real-time Dynamic Simulation of Constrained Multibody Systems using Symbolic Computation
… vehicle suspensions: a five-link and a double-wishbone. The efficient kinematic solution generated for the latter is used in the real-time simulation of a vehicle with double-wishbone suspensions on both axles, which is implemented in a hardware- and operator-in-the-loop driving simulator. The …
-
The Citric Acid Cycle of Thiomicrospira crunogena: An Oddity Amongst the Proteobacteria
… autotrophic Gammaproteobacterium would use a ‘wishbone’ version of the citric acid cycle (CAC) to synthesize the intermediates necessary for biosynthesis, instead of the fully oxidative version to minimize carbon loss as carbon dioxide. However, upon examination of its complete genome sequence, …
-
INTEGRATED INPUT MODELING AND MEMORY MANAGEMENT FOR IMAGE PROCESSING APPLICATIONS
… power consumption. We also designed a reusable wishbone compliant memory controller module that can be used to access the Xilinx Multimedia Board's memory chips using single accesses or burst mode.
-
Simulation and Characterization of Tire Nonuniformity-induced Steering Nibble Vibrations through Integrated Subsystems Modeling
… Analytical models of a nonuniform tire, double-wishbone suspension system, and rack and pinion steering system are sourced from literature and integrated into a single subsystem-level model validated against experimental data obtained as part of a collaborative effort. The integrated analytical …
-
Sustainable automotive design:a holistic strategy for sustainable product and materials development
… material and manufacturing process for a front wishbone component on a sustainably designed urban passenger car, this represents a step forward in the use of natural fibres in composites.
-
Methods for Trustworthy Design of On-Chip Bus Interconnect for General-Purpose Processors
… Bus Architecture [AMBA], HyperTransport, Wishbone, and CoreConnect) based on the Flaw Hypothesis Methodology (FHM). This thesis follows the four stages of FHM. The first stage is Flaw Generation, which involves creating hypothetical attack scenarios. The next is Flaw Confirmation, which …
-
Applying Universal Verification Methodology on a Universal Asynchronous Receiver/ Transmitter design
… demonstrate a verification methodology to verify WISHBONE UART IP Core using the Universal Verification Methodology (UVM) process.
-
Effect of Passive Flow-Control Devices on the Drug of a Tractor-Trailer Model
… have been investigated, including V-grooves, wishbones and doublets. Total drag on the 1/16 th scale tractor trailer model has been measured with a one-dimensional drag balance especially designed for drag-reduction research. Tests have been conducted up to speeds of 80 m.p.h. Findings of this …
-
Design of Chassis, Impact Attenuator, Suspension and Aerodynamic Systems of a Formula SAE Car
… for its crashworthiness. An optimized double wishbone suspension was designed at front and rear which was found to be the best option available for Formula SAE cars. For the aerodynamic system, optimized multi element wings were designed as front, rear and side devices using ANSYS FLUENT. An …
-
Suspension development for a prototype Urban Personal Vehicle
… work are given. The finished concept is a double wishbone suspension font and rear. The suspension has a predictable character without any sudden changes. The suspension characteristics are as close as possible to the given targets, but for some limitation due to packaging issues presented by the …
Page 1 of 3