Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"Wood--Moisture"”.
-
Variations in coniferous wood moisture estimation by electrical techniques
Electrical moisture meters have certain advantages over other techniques for determining wood moisture content. Variability associated with such meter measurements has not been thoroughly investigated. This study examined some sources of this variability that arise between species, between trees …
-
Optimizing Indigenous Timber Short-Gap Crossing Designs by Minimizing Wood Moisture Content
Reducing moisture content increases wood strength and reduces the weight of timber members. An accurate and efficient method for measuring moisture content is important for the design and construction of indigenous timber short-gap crossings. This study evaluates different methods for measuring …
-
Measurement of wood moisture content above fiber saturation point by electrical resistance
… As most drying defects occur when the lumber moisture content is above fiber saturation point (FSP), measurement of moisture content (MC) above FSP is critically important. In this study, a technique was developed which permits use of an electrical resistance moisture meter RDX-1 (Delmhorst …
-
Survival and feeding of subterranean termites, Reticulitermes spp., in three relative humidity regimes
… determine the effects of relative humidity and wood moisture on termites isolated in a wooden structure.</p> <p>Research was conducted to determine the effects of soil access or no-soil access in three relative humidity regimes (90 to 100%, 50 to 60%, and 30 to 40%) on survival and feeding of …
-
Aspects of chemical control of the old house borer, Hylotrupes bajulus (L.) (Coleoptera: Cerambycidae)
… of the final spray when it is applied to pine sapwood. The diluent of choice for providing the best penetration of the active ingredient, chlorpyrifos, is an Oil-based carrier for the formulated product Dursban® WT. Dursban® TC, another product containing chlorpyrifos, will penetrate the wood …
-
Mykologische und holzanatomische Untersuchungen zur Massaria-Krankheit an Platanen
… on favorable environmental conditions for the wood decay fungus Splanchnonema platani as the causative agent of Massaria disease on plane trees. New findings were obtained from the observation of the fungal infected wood in field (in vivo) and laboratory tests (in vitro).<br>The investigations …
-
ΚΙΝΗΤΙΚΗ ΜΕΛΕΤΗ ΤΗΣ ΠΥΡΟΛΥΣΗΣ ΒΙΟΜΑΖΑΣ ΓΙΑ ΤΗΝ ΠΑΡΑΓΩΓΗ ΥΓΡΩΝ ΚΑΥΣΙΜΩΝ
… A SIGNIFICANT GROUP WITH A LOT OF APPLICATIONS. WOOD PYROLYSIS PRODUCES LIQUID PRODUCTS RICH IN PHENOLS, BECAUSE OF ITS HIGH LIGNIN CONTENT. WOOD PYROLYSIS HAS BEEN STUDIED IN A FLUIDIZED BED REACTOR. THE EFFECT OF : THE BED TEMPERATURE, THE RESIDENCE TIME OF THE PYROLYSIS PRODUCTS IN THE …
-
Nonisothermal moisture transport in wood
… the uniaxial (tangential direction) equilibrium moisture profiles in moisture-sealed wood samples subjected to constant but different temperatures T on opposite faces, and to compare these profiles with those predicted by each of several theoretical models. Each test assembly consisted of eight …
-
A theoretical and experimental investigation of moisture diffusion in wood
… of the diffusion equation to the problem of moisture movement below the fiber saturation point is investigated. The general diffusion equation was solved by numerical methods for the case of a concentration-dependent coefficient and a boundary condition of a specified concentration variation. …
-
Moisture conditions in rain exposed wood joints - Experimental methods and laboratory measurements
This thesis concerns the moisture conditions in rain exposed wood structures, i.e. wood exposed to high moisture levels. The focus was on the microclimate (the climate at the wood surface) and the material climate (the wood moisture content) in joints. Methods for determination of microclimate, …
-
Masonry heater performance evaluation: efficiency, emissions, and thermal modeling
… to burn rate following EPA Method 28 for wood heaters. The TCC Method uses carbon balances to calculate the chemical energy loss and the dry stack gas mass for calculation of sensible energy loss. The sensible loss that occurs during the off-period, when combustion of wood has stopped, is …
-
Fracture development in wood resulting from bending stresses and detected using the acoustic emission phenomenon
… approach to the problem of failure prediction of wood components and structures is that of fracture mechanics. In order to implement this approach knowledge of flaw growth (or crack propagation) in wood subjected to various stress systems and environmental conditions is required. The extension of …
-
Estimating wood physical properties by using microwave measurements
Wood is a natural material with a wide range of physical properties. For effective use of the material resource, it is important to be able to make reliable non-destructive measurements of material properties. Of particular interest here are grain angle, moisture content and density of wood. These …
-
Role of substrate moisture, relative humidity and temperature on survival and foraging behavior of Formosan subterranean termites
… food transfer system of these social insects. Moisture and temperature play a vital role in influencing the foraging behavior of these desiccation prone insects. A series of laboratory experiments were conducted to understand the subtleties of foraging behavior of Coptotermes formosanus Shiraki …
-
Theoretical and experimental investigation on hygroscopic warping of wood composite panels
Thesis (Ph. D.)--Michigan State University. Department of Forestry, 1994
-
Carbon Dioxide (CO<sub>2</sub>) Emissions, Human Energy, and Cultural Perceptions Associated with Traditional and Improved Methods of Shea Butter Processing in Ghana, West Africa
… and centralized processing methods. The moisture content of 16 firewood samples collected at the centralized processing center found wood moisture to range between 9-34%. The largest amounts of human energy expended during traditional and improved processes take place during the nut …
-
Studies of the interactions of CCA and ACA preservative treated wood with soil
… changes at the interface between soil, and wood treated with CCA or ACA wood preservatives were investigated using a series of leaching and soil burial studies. The softwoods Scots pine (<i>Pinus sylvestris</i>, L.), Sitka spruce (<i>Picea sitchensis</i>, Carr) and the hardwood lime …
-
Estoque de energia da madeira de espécies florestais da Caatinga e análise técnica de sua utilização na queima de cerâmica vermelha
… do Norte, there is a high industrial demand for wood for energy, as is the case with the red ceramic industry of the state that uses it in the burning of clay. The wood presents different energetic characteristics, according to the species, but the commercialization of this fuel in the RN is …
-
Influence of cellulose chain length on the mechanical behavior of Douglas fir wood in tension parallel to grain.
… 50, and 70°C temperatures in combination with moisture-free, air-dry, and water-saturated conditions of test specimens. Ultimate tensile strength, an elastic constant, ultimate tensile strain, and work to maximum tensile load have been calculated from experimental data. Results were …
Page 1 of 3