Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Wood--Testing"”.
-
Microwave Sensing for Non-Destructive Evaluation of Anisotropic Materials With Application in Wood Industry
Microwave non-destructive testing of wood is an active research field, but, despite remarkable advances reported in the literature to date, the wood testing devices are not widely implemented in industry. This thesis aims to progress the knowledge on wood testing by investigating two of the key …
-
Reliability study of North American dimension lumber in the Chinese timber structures design code
… method to establish the design values of Chinese wood strength properties was investigated. In particular, Chinese load information, including the statistical models and parameters, was analyzed. Also, the reliability associated with wood structural design requirements in Canada was studied. The …
-
Historically Char-ming
Within the field of Historic Preservation, wood is an essential building material to understand and develop effective treatments to preserve given its wide spread use in history in particular the United States and North America. One of wood's fatal properties is its combustibility. Fire is a …
-
The effect of length on tensile strength parallel-to-grain in structural lumber
Two sizes (2x4 and 2x10) and two grades (2250f-1.9E and No. 2 KDl5) of Southern Pine lumber having three different test span lengths of 30, 90 and 120 inches were tested in tension parallel-to-grain. Results obtained from the tests indicated that the tensile strengths of the 30-inch test specimens …
-
Heat treatment of exterior particle board
Thesis (M.S.)--Michigan State University. Dept. of Forest Products, 1968
-
Measuring Young's moduli, shear moduli, and Poisson's ratios for wood by a tension test
Thesis (Ph. D.)--Michigan State University. Department of Forestry, 1979
-
The influence of moisture content history on the deflection behavior and ultimate load level of individual wood tensile joints fastened with metal plates
Thesis (M.S.)--Michigan State University. Forest Products Department, 1967
-
Development of flexural design values for pallet shook
Rational design of wood pallets requires estimates of average flexural properties of pallet lumber of many species and visual grades. The objective of this study was to develop procedures for estimating these design values for use in a first-order second-moment design format. Preliminary studies …
-
Allowable bending strength enhancement of 2 by 4 lumber by tension and compression proofloading
… that characterized the properties of 2-inch softwood dimension lumber with regressions and probability distributions. Randomly selected groups of 2 by 4 1650f-1.5E Hem-fir and No.2 KD Southern Pine were evaluated for bending strength. One group from each species was selected as a control and …
-
Changes in wood-flake properties in relation to heat, moisture, and pressure during flakeboard manufacture
In an attempt to relate different pressing parameters to changes in test flake properties, eight hot-press cycles were used in the manufacture of 24 flakeboard panels, with 2 levels each of platen temperature, initial mat moisture content, and press closing time. Temperature and gas pressure …
-
The history, manufacture and physical testing of the wood wheel
Thesis (B.S.)--Michigan Agricultural College, 1921
-
Efficiency of wooden tension joints
Thesis (B.S.)--Michigan Agricultural College, 1913
Page 1 of 3