Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 791 for “"Workpiece"”.
-
Investigation of waterjet-workpiece interaction
… ultrasonic stress wave propagation in the workpiece. Fatigue, an important element in producing material erosion, is enhanced by this high frequency stress and reduces the material endurance limit. Experimental results validate the existence of these stress waves. The frequency is 3 MHz in …
-
Cutter-workpiece engagement identification in multi-axis milling
… cutter swept volume generation, in-process workpiece modeling and Cutter Workpiece Engagement (CWE) algorithms for finding the instantaneous intersections between cutter and workpiece in milling. One of the steps in simulating machining operations is the accurate extraction of the …
-
Computation and verification of workpiece shape in electrochemical machining
This investigation was motivated by the need for accurate prediction of electrochemical machined surfaces relative to corresponding tool geometries for given sets of machining parameters. A mathematical model was formulated which simulates the electrochemical erosion achieved by primary current …
-
A voxelized framework for simulating cutting tool and workpiece interaction
… teeth of an arbitrary end mill geometry and a workpiece is developed that allows for the virtual machining of workpiece volumes with generated tool geometry. In this framework, the workpiece geometry is modeled using a voxelized representation that is dynamically updated as material is locally …
-
Workpiece -Fixture Frictional Contact and Its Influence on Machining Performance
… machining process stability by taking the workpiece-fixture interaction into account. Results from machining process stability showed that the machining stability is strongly influenced by the frictional contact and the incorporation of its influence allows for optimal fixture design.
-
ON-MACHINE MEASUREMENT OF WORKPIECE FORM ERRORS IN ULTRAPRECISION MACHINING
… offline. This is done by physically removing the workpiece from the machining fixture and mounting the part in a laser interferometer. This action introduces errors in itself through minute differences in the support conditions of the over constrained part on a machine as compared to the mounting …
-
Modeling the Dynamics of Plunge Milling with Workpiece Vibrations Consideration
… process for systems with rigid and flexible workpiece. The model predicts the cutting forces, system vibration and process stability by considering the effect of workpiece and tool dynamics, tool setting errors and tool kinematics on chip area evaluation. The dynamic chip area is evaluated …
-
Triangle-mesh based cutter-workpiece engagement extraction for general milling processes
… a novel geometric modeling methodology of cutter-workpiece engagement extraction for general milling processes. Cutter-workpiece engagement (CWE) geometry is the instantaneous contact area between the cutter and the in-process workpiece. It defines how the cutting edge enters and exits the …
-
A 3D vision framework for generalized workpiece localization in robotic manufacturing
Automated workpiece localization through CAD-based Point Cloud Registration (PCR) plays a key role in enabling adaptive robotic tasks, e.g., mapping toolpaths from a CAD model to the current workpiece location. However, existing approaches often lack the robustness required for full autonomy and …
-
Machining dynamics and stability analysis in longitudinal turning involving workpiece whirling
… machining model describing the coupled tool-workpiece dynamics subject to nonlinear regenerative cutting forces, instantaneous depth-of-cut (DOC) and workpiece whirling due to material imbalance. The workpiece is modeled as a system of three rotors: unmachined, being machined and machined, …
-
Modeling, Sensing and Control of Workpiece Geometric Accuracy in Bar Turning
… the machining system, on-line measurement of the workpiece geometry, tool actuation and predictive control design.</p> <p>A mechanistic dynamic model of the machining system in bar turning is developed. The model accounts for the rather complex geometry of a multi-edged cutting tool and considers …
-
Acoustic emission spikes at workpiece edges in grinding: Origin and applications
… spikes have been reported to occur at the workpiece entry and exit in interrupted machining operations, most notably during grinding. These AE spikes have yet to be fully explained in terms of their cause, or interpreted to yield useful information regarding the grinding process. This …
-
Efficient cutter-workpiece engagement determination in multi-axis milling by voxel modeling
… of cutter swept volume generation, in-process workpiece update, and cutter-workpiece engagement (CWE) extraction, is an essential component of virtual machining which simulates the use of machine tools for part machining. Geometric modeling not only verifies the machining tool paths but also …
Page 1 of 40