Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"X-bracing"”.
-
Repair and Retrofit of Non-Ductile Reinforced Concrete Frames with Diagonal Steel Compression Struts
… elements such as infill walls or steel bracing, and the second would be to strengthen the structural elements: the joints, beams, and columns. The latter has been studied using fibre reinforced polymers (FRP) and steel jackets. The main objective for this research is to evaluate the …
-
STEEL CONNECTION DESIGNS BASED ON INELASTIC FINITE ELEMENT ANALYSES (GUSSET, BRACING, STRUCTURES).
… scale connection tests. Finite element models of bracing connections were generated to determine gusset plate force, stress, strain, and displacement distributions for a variety of connection designs including K-bracing and X-bracing. Based on these results current design procedures were …
-
Flange stability bracing behavior in metal building frame systems
… building systems not fully addressed in existing bracing design procedures. Special emphasis is placed on attributes such as unequal brace spacing and stiffness, end brace point flexibility, nonprismatic member geometry, special requirements at knee joints and the specific configuration of …
-
The effect of lateral bracing on the dynamic response of wood floor systems
… an extensive study of several types of lateral bracing for solid-sawn and parallel-chord truss floor systems. Three solid-sawn floor bracing systems were evaluated: X-bridging, full-depth solid blocking, and finally, post-tensioned solid-blocking. Five different truss bracing systems were …
-
Optimal Bracing Type and Layouts to Minimize Lateral Drift in High-Rise Steel Framed Buildings Subjected to High Winds Using SAP2000
OPTIMAL BRACING TYPE AND LAYOUTS TO MINIMIZE LATERAL DRIFT IN HIGH-RISE STEEL FRAMED BUILDINGS SUBJECTED TO HIGH WINDS USING SAP2000 NICHOLAS F. MCEWEN Civil, Const. & Environmental Engineering (ABSTRACT) As cost controls almost all projects and wind forces typically control the design of high-rise …
-
Elastic And Inelastic Stability Of Two-Panel Tiered Concentrically Braced Frames
… two-panel concentrically braced frame with an x-bracing arrangement. Other recent research efforts have studied the effect that differential tier drifts resulting in weak-axis flexural yielding have on the strong-axis buckling strength of columns in a four-tier concentrically braced frame. A …
-
Seismic design study of concentrically braced frames with and without buckling-controlled braces
… braces. V-type, inverted V-type, and two-story X-bracing are three major categories of SCBF bracing configurations. According to the current design approach implemented in AISC 341-10, beams and columns in SCBFs shall be designed based on the capacity of the braces to keep the beams and columns in …
-
Seismic fragility assessment of high-rise steel buildings strengthened with moment resisting and bracing frames and under various soil conditions to the ASCE and Eurocodes regulations
… and braced steel framed buildings (V and X-bracing system) with slim deck flooring system. This thesis investigated the probability of the failure of high-rise steel buildings under seismic loads. There are several experimental and numerical researches implemented in this subject area which …
-
Rehabilitation of nonductile reinforced concrete buildings using steel systems
… systems include the addition of concentric X-bracing, eccentric bracing and attached steel frames. The effectiveness of the various steel systems in rehabilitating the three- and nine-story buildings were examined. The effect of the distribution of the steel bracing along the height and along …