Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"X-ray lithography"”.
-
Synthesis and characterization of boron nitride masks for x-ray lithography
… refractive index was found to be around 1.76. X-ray diffraction measurements indicated that the films were in all cases amorphous. The effects of deposition parameters, namely temperature, flow rate, pressure, and silicon addditives, on the kinetics of film growth, composition, and properties …
-
Synthesis and characterization of LPCVD boron nitride films for x-ray lithography
Boron nitride thin films were deposited on silicon and fused quartz substrates using ammonia and the liquid precursor borane-triethylamine complex (TEAB) by low pressure chemical vapor deposition over a temperature range of 300-850 C, a pressure range of 0.21-0.6 torr, and an ammonia flow rate …
-
Implementation of an ultra deep x-ray lithography (UDXRL) system at CAMD
… in PMMA were fabricated, using deep X-ray lithography at the wiggler radiation source at the Center for Advanced Microstructures and Devices (CAMD). For the first time the concept of stacked exposures has been experimentally verified and tested. <br> <br>The work consists of two main …
-
Synthesis and characterization of LPCVD silicon carbide thin films for x-ray lithography
… the presence of Si-C vibrational mode. X-ray diffraction studies confirmed the amorphous nature of the film. Deposition temperature was found to play an important role in the stoichiometry of the film. The carbon atomic composition of the film was increased as the deposition temperature …
-
Development and Characterization of a Fabrication Process for X-Ray Lithography Masks Based on a Silicon Nitride Membrane
A novel X-ray lithography (XRL) mask concept and fabrication approach is developed, tested, and validated. The concept focusses on yielding high-quality, low-cost intermediate masks, suitable for patterning devices with resist thickness of up to tens of micrometers. Specific consideration was given …
-
X-ray lithographic fabrication of blazed diffraction gratings
… of Blazed Diffraction Gratings using X-Ray Lithography. Using X-Ray lithography in tandem with holographically fabricated gratings is a key to smaller features since the wavelength of the resist ionizing radiation (X-Rays) is not constricted by the much larger wavelength of ultra violet …
-
Fabricating microfluidic devices in polymers for bioanalytica applications
… devices were produced in PMMA using X-ray lithography. The fabrication methods investigated were sacrificial mask, polyimide membrane mask and embossing techniques. PMMA microfluidic devices fabricated using X-ray lithography were characterized using scanning electron microscopy (SEM) …
-
Finite element analysis of surface acoustic wave resonators
… sub-micron processing capabilities of LIGA (X-ray lithography) present a promising outlook for high frequency SAW device modeling and fabrication respectively. A finite element model has been developed using commercial software ANSYS for one port SAW resonators and is presented in this thesis. …
-
Microwave LIGA-MEMS variable capacitors
… MEMS devices is LIGA, a German acronym for X-ray lithography, electroforming, and moulding. LIGA uses X-ray lithography to produce very tall structures (hundreds of microns) with excellent structural quality, and with lateral feature sizes smaller than a micron. These unique properties have …
-
Low pressure chemical vapor deposition of tungsten as an absorber for x-ray masks
Tungsten film is one of promising materials for X-ray absorber in X-ray Lithography technology because of its high X-ray absorption and refractory properties. This study focus on CVD method to make tungsten film for X-ray absorber. In this work, a cold wall, single wafer, Spectrum 211 CVD reactor …
-
High aspect ratio microstructure coupler
… ratio lumped elements fabricated with deep X-ray lithography are able to take advantage of using the vertical dimension, and reduce their planar area. In this thesis high aspect ratio lumped elements are used in the design of 3-dB microstructure couplers that show significant area reduction …
-
Plasma enhanced chemical vapor deposition of stress free Tungsten films
… focuses on PECVD to make tungsten film for X-ray absorber for use in X-ray lithography applications. The previous LPCVD study was used for comparison of film properties. A cold wall, single wafer, Spectrum 211 CVD reactor was used for the deposition of tungsten from H2 and WF6. The growth …
-
Estimation of Future Manufacturing Costs for Nanoelectronics Technology
… devices were also addressed. The use of x-ray lithography for the construction of devices on a 3nano-scale2 was considered. Next, cost trends within the microelectronics industry were explored. Although the cost per transistor has been observed to decrease, total equipment costs and …
-
A microscopic rotating motor with corona drive
… wide (axial) and have sharp tips. Therefore, X-ray lithography was adopted for precise, high aspect ratio characteristics. To avoid the fabrication difficulty of a membrane Xray mask, a built-on X-ray mask (conformal mask) technique was employed with negative toned SU-8 photoresist. SU-8 …
-
Development of a subsystem and algorithm for alignment and overlay improvement for microlithography
Microlithography is the process of transfer of minute electronic circuit patterns from a template (also called a mask) onto the surface of wafers for the manufacture of integrated circuits (ICs). A typical IC consists of seven to twenty layers of patterns. In this process it is essential to align …
-
Design and development of an adaptive shape wafer chuck to compensate for wafer surface topography and backside particles
… and wafer surface irregularities during the lithography process. The Step and Flash Imprint Lithography (SFIL) process has been dealt with in particular and the needs of this process have been considered in deciding the design metrics for the wafer chuck. SFIL is a novel, low-cost approach to …
-
Characterization of inconel/carbon multilayer mirrors for 45 Å wavelength
This thesis reports on the study of x-ray mirrors that operate at normal incidence for 45 Å wavelength used in applications such as x-ray microscopy, x-ray astronomy, x ray lithography, x-ray imaging, and x-ray lasers. These mirrors are fabricated by alternately depositing two materials of …
-
Synthesis and characterization of LPCVD SiC films using novel precursors
… used to produce high quality mask membrane for x-ray lithography. These films can also be used in fabricating high power electrical devices, and hetrojunction devices in conjunction with silicon. Amorphous SiC films were synthesized using a single precursor, ditertiarybutylsilane, at temperatures …
-
Fabrication of high aspect ratio vibrating cylinder microgyroscope structures by use of the LIGA process
… by using a combination of thick film photolithography and electroplating (nickel and gold) on a silicon substrate covered with silicon nitride and a tri-layer plating base; aligned X-ray lithography and nickel electroplating were used to build the high aspect ratio cylinders and electrodes. …
Page 1 of 3