Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"Xerogels"”.
-
Functional materials from supramolecular xerogels and polymers
… superhydrophobic surfaces from supramolecular xerogels with low molecular weight gelators (LMWGs). LMWGs are small organic compounds that have a strong preference to form gels in a suitable solvent. To achieve a xerogel coating, one can drop-cast the gel onto substrates such as glass cover …
-
Monitoring the gelation mechanism of resorcinal-formaldehyde xerogels
Resorcinol-Formaldehyde (RF) xerogels are a type of porous material used in many applications, such as gas storage. These applications often require fine control of the material's porosity, and while it is known that the porosity of a xerogel can be changed through altering synthesis variables, it …
-
The effect of the catalyst on the formation of RF xerogels
… of catalyst and sol pH. In this study organic xerogels were prepared using the pre described poly-condensation method, however, a wide range of base catalysts (Na?CO?, K?CO?, NaHCO?, KHCO?, NaOH, KOH, CaCO?, SrCO?, BaCO? and (NH?)?CO?) were employed, at varying concentrations, with all other …
-
Carbon xerogels doped with silicon or tin oxide for lithium-ion battery anodes
In this thesis, a carbon xerogel (CX) was used as an electrically-conductive 3D support matrix for either silicon, an alloying-type active material, or tin oxide, a conversion-type and alloying-type active material, for use as a negative electrode in a lithium-ion battery. This thesis aimed to …
-
Novel amorphous silica and silica xerogels for the adsorption of organic pollutants from water
… novel amorphous silica Quartzene and on silica xerogels, synthesised by a low cost and environmentally friendly synthesis, inspired from the work of Bangi, Rao A.P., Hirashima and Rao A.V. [1]. All adsorbents used in this study were also characterised by SEM, FTIR and BET analysis. The full …
-
The synthesis of metal oxide-based xerogels via the epoxide addition and sacrificial template method
This study describes a new sol-gel synthesis method to produce nano-structured, porous metal oxides. The purpose of this hybrid method is to reduce the total production time needed for most sol-gel syntheses. A typical sol-gel synthesis requires fours steps: selection of precursor solution, …
-
Preparation and characterization of novel carbon material derived from resorcinol-formaldehyde xerogels for CO2 capture
… this work, resorcinol-formaldehyde (RF) carbon xerogels with high porosity and surface area have been synthesized via the sol-gel polycondensation reaction of resorcinol (R) with formaldehyde (F) in a slightly basic medium followed by drying and pyrolysis. The influences of selection the …
-
Structural and Mechanical Properties of Silica and Hybrid Aerogels and Xerogels Studied Using Molecular Dynamics Simulations
… properties of silica and hybrid aerogels and xerogels are studied using Molecular Dynamics simulations. Hybrid samples are created by adding methyl groups (CH3) to the silica structure. Silica samples are generated expanding a dense silica glass in a simulation box of volume chosen to produce …
-
Supramolecular Functional Materials: Teslaphoresis for Achieving Anisotropy and the Effect of Perfluorinated Side Chain Length in Xerogels
The bottom-up fabrication of coatings consisting of supramolecular compounds—while inexpensive and facile—poses several challenges. One challenge concerns the creation of anisotropic properties. To provide a directionality in the structures, the utilization of recently developed teslaphoresis is …
-
Development of novel formulations for mucosal delivery of protein based drugs
… lyophilised chitosan and thiolated chitosan xerogels have been developed for potential delivery of proteins via the buccal mucosa. Membrane dialysis to eliminate sodium acetate (NaAc) and annealing during lyophilisation cycle (developed by differential scanning calorimetry; DSC) were critical …
-
Trapping dendrimers in inorganic matrices: Formation of silica xerogels with spherical cavities and dendrimer /zinc arsenate lamellar composites
… composites that, in one case, yielded silica xerogels with spherical cavities (after template removal), and in a second approach produced lamellar dendrimer/zinc-arsenate composites with long range layered structures. These unique materials are expected to open the door to synthetic pathways …
-
Creating Unique Chemistries within Porous Silicon Platforms & Piezoelectric Inkjet Printed Glucose Biosensor Based on Protein and Luminophore Doped Hybrid Xerogels
This dissertation discusses two areas of research with analyte-dependent photoluminescence (PL) response as the commonality. Part I demonstrates that gallium indium (GaIn) eutectic can be used to create interesting crystalline Si/porous silicon (cSi/pSi) platforms that exhibit unique analyte-and …
-
Development of nitrogen doped resorcinol-formaldehyde gels for carbon capture
Resorcinol-Formaldehyde (RF) xerogels are organic materials that have been widely studied due to their industrially relevant characteristics, such as high surface areas, suitable pore size and pore volume on which target species can be adsorbed; additionally, RF gels have significant potential to …
-
The synthesis of copper-based aerogels and xerogels via the epoxide addition method using various Supports and templates to improve surface area and increase efficiency in preparation techniques
Aerogels and xerogels have desirable properties for heterogeneous catalysis. The epoxide addition sol-gel route has proven to be the most efficient and cost-effective method to produce transition metal aerogels and xerogels. Copper oxide and copper and zinc oxide catalysts are popular today because …
-
Properties of functionalised porous zirconium titanium oxide materials prepared by supramolecular templating
… of porous zirconium titanium (ZrTi-x) oxide xerogels. Physical characterisation of these materials with differing Zr:Ti metal ratios confirm that their features encompass amorphous wormhole-like structures, narrow monomodal pore size distributions and high surface areas after sol-gel ageing …
-
Catalytic polymerization of cycloolefins and isocyanates with transition metal complexes
… crosslinked poly(dicyclopentadiene) (PDCPD) xerogels, which showed extreme swelling. This behavior is unique compared to polymeric and carbon-based adsorbents from the literature, and is directly related to the use of the ditungsten catalyst. Na[W2(μ-Cl)3Cl4(THF)2]·(THF)3/NBD (3; NBD: …
-
Adsorption-Induced Deformation of Nanoporous Materials — in-situ Dilatometry and Modeling
… are (activated and thermally annealed) carbon xerogels, a sintered silica aerogel, a sintered hierarchical structured porous silica and binderless zeolites of type LTA and FAU; this selection covers micro-, meso- and macroporous as well as ordered and disordered model materials. All sample …
-
Topical delivery of alpha1-Antichymotrypsin for wound healing
… studies in hydrogels and dry gel forms, i.e. xerogels prepared by freeze-drying and films gained from air drying of hydrogels. All carriers are investigated upon their stabilizing activity on the protein drug also for mid term shelf life, their suitability for the use as wound dressings mainly …
-
Advanced oxidation processes for persistent micropollutant elimination in wastewater intended for surface release
… finally studied: cylindrical monolithic carbon xerogels were produced by a sol-gel process, pyrolyzed and installed as cathodes in an electrically powered system. Under a steady current of 100 mA, the material produced 4 mg/L hydrogen peroxide (H2O2), which is sufficient to destroy adsorbed …
Page 1 of 3