Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Zero Velocity Update"”.
-
ROBOTIC NAVIGATION IN GPS-DENIED ENVIRONMENTS USING THE STRAPDOWN NAVIGATION ALGORITHM WITH ZERO-VELOCITY UPDATES
… a pedestrian algorithm, which incorporates the zero-velocity update, to address the error and calculate distance traveled by a mobile robot in a GPS-denied environment. This work focused on indoor navigation using various sensors to provide data to the algorithm to calculate estimated distance …
-
Decentralized Cooperative Localization for Multi-Robot Systems in Challenging Environments
… the use of different pseudo-measurement, such as Zero-Velocity Update (ZUPT) and Zero Angular Rate Update (ZARU), to improve the localization performance of the group. The Error-State Decentralized Extended Kalman Filter (ES-DEKF) utilizes proprioceptive (i.e., Inertial Measurement Unit (IMU), …
-
Short-Term Tracking of Orientation with Inertial Sensors
… Most of the current common practices apply zero velocity update as a calibration method to address this problem and improve the estimation accuracy. However, this approach requires the sensors to be stationary frequently. This thesis introduces a novel method of calibration for estimating …
-
Motion Aided Inertial Navigation System Calibration for In-Drilling Alignment
… over time. Periodic calibration methods such as zero-velocity update (ZUPT) reduce the rate of error accumulation in INS but with limited success due to a static error model. This work presents a dynamic INS calibration method for measurement-while-drilling (MWD) known as in-drilling alignment …
-
Comprehensive and accurate estimation of lower body movement using few wearable sensors
… and assumptions (e.g., pelvis height, zero-velocity update, flat-floor assumption, inter-IMU distance), and enforce biomechanical constraints (e.g., constant body segment length, hinged knee joints, range of motion). The algorithm was comprehensively evaluated on nine healthy subjects …
-
Radar and INS Integration for Enhancing Land Vehicle Navigation in GNSS-Denied Environment
… the vehicle’s navigation states (position, velocity, and attitude) with high accuracy. However, the INS solution deteriorates with time because of the INS drift. Therefore, other sensors are used to aid IMU in correcting the IMU drift and estimate the vehicle’s navigation states with high …
-
Signal Processing Techniques for Step Counting, Activity Classification, and Distance Measurement Using a Single IMU
… low-pass Finite Impulse Response (FIR) filter, zero-velocity updates were applied at each detected gait event and dominant stride frequencies were extracted via Fast Fourier Transform (FFT) over sliding windows. In test with five subject on a 75 m straight path, step-count accuracy averaged 98% …
-
Instrumentation And Inertial Navigation Systems Design For Tensegrity Robot Implementations
… a single strut of a tensegrity structure using zero velocity updates. The methods are implemented on a static icosahedran tensegrity structure to test the viability of the ZUPT-aided INS, how it can be improved, and other instrumentation configurations that can improve the results in future …
-
Intelligent Fastening Tool Tracking Systems Using Hybrid Remote Sensing Technologies
… action is detected, the system corrects the velocity and position error using zero velocity update (ZUPT). By using the corrected tool tip position and orientation, the system can identify the fastened bolts. Then, with the fastened bolt position, the position of the IMU is corrected. When …