Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 113 for “"Zero charge"”.

  1. Application of Adsorption for Removal of Emerging Pollutants from Drinking Water

    … granular activated carbons with basic point of zero charge were selected as adsorbents. Isotherm adsorption of model compounds on adsorbents was conducted at 280, 288, and 296 K. The Gibbs free energy, enthalpy, and entropy of adsorption were calculated using isotherm model parameters. Nitric …

    sask Repository record for Application of Adsorption for Removal of Emerging Pollutants from Drinking Water (opens in a new tab)

  2. The Structure of Solvents Confined to Metal Surfaces

    … potential control, positive of the potential of zero charge (PZC), STM reveals the DMSO solvent structure together with the perchlorate anion. The tetrabutylammoniurn cation can not be seen due to the presence of water in the DMSO solution. With appropriate choice of electrolyte, it may now be …

    uiuc Repository record for The Structure of Solvents Confined to Metal Surfaces (opens in a new tab)

  3. Interrogating the Electrochemical Interface Using Sum Frequency Generation Spectroscopy

    … that PABA changes orientation in response to the charge on the electrode surface, orienting one way positive of the potential of zero charge (pzc) and oppositely negative of the pzc. At positive potentials a phase change is observed associated with the formation of a condensed layer. These results …

    uiuc Repository record for Interrogating the Electrochemical Interface Using Sum Frequency Generation Spectroscopy (opens in a new tab)

  4. Particulate fouling by iron oxide at elevated temperatures : surface chemistry, interfacial electrochemistry and sensor development

    … titration was used to measure the pH of zero charge (PHZC) of magnetite and hematite (both known particulate foulants) from 25 ºC to 200 ºC. Electrochemical impedance spectroscopy (EIS) was used to measure the minimum differential capacitance of a glassy carbon electrode (GC) as a …

    ubc Repository record for Particulate fouling by iron oxide at elevated temperatures : surface chemistry, interfacial electrochemistry and sensor development (opens in a new tab) Download PDF for Particulate fouling by iron oxide at elevated temperatures : surface chemistry, interfacial electrochemistry and sensor development (opens in a new tab)

  5. Towards Ion Channel Based Nanofluidic Devices: Simulations of Water and Electrolyte Transport in Nanotubes and Channels

    … Effects of nanoscale confinement and partial charges, that stem from quantum calculations, are investigated in silica slit channels filled with 1 M KCl at the point of zero charge. Oscillations in concentration profiles of K+ and Cl- ions give rise to an electroosmotic flow in the presence of …

    uiuc Repository record for Towards Ion Channel Based Nanofluidic Devices: Simulations of Water and Electrolyte Transport in Nanotubes and Channels (opens in a new tab)

  6. Mixed polyelectrolyte brush modified adsorbents for the separation of proteins

    … sequentially tethering two weak oppositely charged PEL chains, poly(2-vinylpyridine) (P2VP) and poly(methacrylic acid) (PMAA), side-by-side within the pores of beaded meso-macroporous chromatography matrices (Tresyl activated Toyopearl HW65 and Praesto 45) mixed PEL brush adsorbents …

    birmingham Download PDF for Mixed polyelectrolyte brush modified adsorbents for the separation of proteins (opens in a new tab)

  7. The wetting of a titania surface : surface charge and thin liquid films

    … contact angle occurring at the point of zero charge of the titanium dioxide substrate. The contact angle change was also influenced by the surface coverage and salt concentration. At extreme pH values there was no further decrease in the contact angle, i.e. saturation occurred. A …

    adelaide Repository record for The wetting of a titania surface : surface charge and thin liquid films (opens in a new tab)

  8. Novel Aqueous Phase Fabrication and Characterization of Gold Coated Cobalt Nanoparticles

    … X-Ray Diffraction Spectroscopy and Point of Zero Charge (PZC) were used to extensively characterize the NPs among other techniques.

    mo-state Repository record for Novel Aqueous Phase Fabrication and Characterization of Gold Coated Cobalt Nanoparticles (opens in a new tab)

  9. Dispersion of graphene nanoplatelets in water with surfactant and reinforcement of mortar with graphene nanoplatelets

    … characterized the surface forces with point of zero charge (PZC) experiments. This research has the potential to improve the future application of GNPs to composite materials. The author also carried out mechanical testing. Notched beams were prepared and tested in three-point bending. The data …

    uiuc Repository record for Dispersion of graphene nanoplatelets in water with surfactant and reinforcement of mortar with graphene nanoplatelets (opens in a new tab)

  10. Biosorption of cupric and cadmium ions by corncob particles

    … the corncob particles was conducted. The pH at zero charge point of the corncob particles was measured (pH zcp 4.97) by applying the primary equilibrium method of H+ and OH-. (Abstract shortened by UMI.)

    ottawa-retro Repository record for Biosorption of cupric and cadmium ions by corncob particles (opens in a new tab)

  11. Electrochemical and surface topographic studies of oxide film passivation of aluminum

    … the potential range between the potential of zero charge (E[subscript]PZC) and the repassivation potential, and the actively corroding area increases with potential, from zero near E[subscript]PZC to the entire surface at the repassivation potential. A mathematical model describing the …

    iastate Repository record for Electrochemical and surface topographic studies of oxide film passivation of aluminum (opens in a new tab)

  12. Investigating the Effect of Surface Chemistry Changes on the Hydrovoltaic Mechanism

    … in water, harnessed through evaporation in a charged, porous substrate. The field has seen significant progress within the past decade, improving the power output in different materials and environments such as high humidity, low-temperature climates, and snowy conditions. The mechanism of …

    queens Repository record for Investigating the Effect of Surface Chemistry Changes on the Hydrovoltaic Mechanism (opens in a new tab)

  13. AI - Driven Home Energy Management System for Profit and Grid Stability - Deep Reinforcement Learning and Predictive Models for Minimizing Peak Demand While Balancing Battery Degradation in a Dynamic Environment

    … The agent maintains 100% safety compliance (zero charge/discharge violations during final deployment) while achieving high grid independence. Although additional computational time for full training convergence and hyperparameter tuning remains as future work, these preliminary results …

    chalmers Repository record for AI - Driven Home Energy Management System for Profit and Grid Stability - Deep Reinforcement Learning and Predictive Models for Minimizing Peak Demand While Balancing Battery Degradation in a Dynamic Environment (opens in a new tab)

  14. Design of experiments optimisation of Scottish wood biochars for water remediation targeting selected persistent organic pollutants

    … pore widths of 3-5 nm and an average point of zero charge of 7.40 ± 0.02. Proximate analysis showed an increase in fixed carbon content from 20 %, in the feedstock, to 80 %, in the optimised biochar, while morphological analysis showed a layered carbon structure in the biochars. The results …

    strathclyde Repository record for Design of experiments optimisation of Scottish wood biochars for water remediation targeting selected persistent organic pollutants (opens in a new tab)

  15. Μελέτη της εναποθέσεως W(VI) σε TiO2 και της καταλυτικής συμπεριφοράς των TiO2, W/TiO2 καθώς και ζεολιθικών καταλυτών κατά την μερική οξείδωση του λ...

    … size, the specific surface area, the point of zero charge and the isoelectric point of titania. The second step includes the calculation of the physicochemical parameters of the “titania / electrolyte solution” interface. This can be achieved by fitting potentiometric titration curves of …

    greece Repository record for Μελέτη της εναποθέσεως W(VI) σε TiO2 και της καταλυτικής συμπεριφοράς των TiO2, W/TiO2 καθώς και ζεολιθικών καταλυτών κατά την μερική οξείδωση του λ... (opens in a new tab)

  16. Mechanism of oxygen reduction on platinum in netural saline and effects of interstitial fluid

    … is attributed to a shift in the potential of zero charge with pH in chloride solution. The factors affecting the performance of platinum activated carbon cathodes in hybrid biogalvanic fuel cells were also examined. It was found that by-products of aluminum and zinc anodes had no effect on the …

    missouri Repository record for Mechanism of oxygen reduction on platinum in netural saline and effects of interstitial fluid (opens in a new tab)

  17. A Machine Learning and Experimental Approach to Assessing the Impact of Micro- and Nanoplastics on Agricultural Systems

    … for microplastics at the microplastic point-of-zero-charge. Experimental work examined the impact of nanoplastic co-contamination with either environmentally relevant organic contaminants or cadmium. Through this work, nanoplastics were shown to increase the transport of organic contaminants …

    tamu Repository record for A Machine Learning and Experimental Approach to Assessing the Impact of Micro- and Nanoplastics on Agricultural Systems (opens in a new tab) Embargoed until 2027-05-01

  18. Developing and evaluating implicit solvent models for catalytic metallic surfaces

    … soft sphere model to capture the potential of zero charge and the work function of the metallic/liquid interface. By reparameterizing the implicit solvent model in terms of the work function values calculated from snapshots of an AIMD simulation, we were able to capture the salient electronic …

    soton Download PDF for Developing and evaluating implicit solvent models for catalytic metallic surfaces (opens in a new tab)

  19. Study of Chemical States, Composition and Adsorption Behavior of Iron Coated Granular Activated Carbon (Fe-GAC) for Selenate Removal and Feasible Adsorbent Modifications

    … (i.e., 0.001, 0.01 and 0.1M) and showed point of zero charge (pHpzc) at pH 7.8 for the tested Fe-GAC. It indicates a preferred positively charged surface for anions under acidic conditions. Raman spectroscope was used to determine the type of surface complex and the coordination state of adsorbed …

    wvu Repository record for Study of Chemical States, Composition and Adsorption Behavior of Iron Coated Granular Activated Carbon (Fe-GAC) for Selenate Removal and Feasible Adsorbent Modifications (opens in a new tab)

Page 1 of 6