Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 74 for “"Zero-Current Switching"”.

  1. Full Bridge DC/DC Converter with Zero Current Switching Synchronous Rectification for Auxiliary Power Units

    … design challenges of APU include large output current, strict efficiency requirement and low electromagnetic interference (EMI). In this thesis, a phase shifted full bridge (PSFB) DC/DC converter with current doubler synchronous rectifier is proposed for APU applications. The proposed converter …

    mcmaster Repository record for Full Bridge DC/DC Converter with Zero Current Switching Synchronous Rectification for Auxiliary Power Units (opens in a new tab)

  2. Digital-Based Zero-Current Switching (ZCS) Control Schemes for Three-Level Boost Power-Factor Correction (PFC) Converter

    … been widely used for the purpose. In order to concurrently achieve high efficiency and low-cost system in the PFC stage, zero-current switching (ZCS) control schemes are highly employed in control principles. Representative schemes are discontinuous conduction mode (DCM) and critical conduction …

    vt Repository record for Digital-Based Zero-Current Switching (ZCS) Control Schemes for Three-Level Boost Power-Factor Correction (PFC) Converter (opens in a new tab)

  3. GAN-BASED POINT-OF-LOAD CONVERTERS FOR DATA CENTER APPLICATIONS

    … an increase in server processing power, high-current operation presents challenges to designing high-efficiency POL converters. Increased conduction and overlap losses induce significant power losses in high-power modes. The introduction of Gallium-Nitride (GaN) switching devices and the …

    ut-knoxville Repository record for GAN-BASED POINT-OF-LOAD CONVERTERS FOR DATA CENTER APPLICATIONS (opens in a new tab)

  4. High Power Density and High Efficiency DC-DC Converters Based on Wide Bandgap Semiconductors

    … desired in more and more applications. Soft-switching technology is one of the key points that help us to achieve the goals. In this research work, a series of soft-switching power converters are presented and analyzed. First, a modular multilevel converter (MMC) with zero-current switching …

    ndsu Repository record for High Power Density and High Efficiency DC-DC Converters Based on Wide Bandgap Semiconductors (opens in a new tab)

  5. Design and Control of a Compact 7.2 kW GaN-Based Bidirectional Isolated On-Board Charger (OBC)

    … three major contributions: First, a novel Zero Crossing Voltage Control (ZCVC) strategy for Power Factor Correction (PFC) applications is developed. This approach ensures a consistent sinusoidal AC current, eliminates second harmonic distortions without notch filters, and achieves stability …

    carleton Repository record for Design and Control of a Compact 7.2 kW GaN-Based Bidirectional Isolated On-Board Charger (OBC) (opens in a new tab)

  6. Analysis and design of high frequency link power conversion systems for fuel cell power conditioning

    … systems. The first study proposes a new soft switching technique for the phase-shift controlled bi-directional dc-dc converter. The described dc-dc converter employs a low profile high frequency transformer and two active full-bridge converters for bidirectional power flow capability. The …

    tamu Repository record for Analysis and design of high frequency link power conversion systems for fuel cell power conditioning (opens in a new tab)

  7. Vícefázový serio-paralelní LLC rezonanční měnič

    … spínání polovodičů je využívána technika ZVS (Zero Voltage Switching) na primární straně a ZCS (Zero Current Switching) na straně sekundární. Zdroj byl navržen na základě teoretických poznatků z oblasti principu spínání ve výkonových měničích, topologií používaných pro výkonové měniče a …

    brno-tech Repository record for Vícefázový serio-paralelní LLC rezonanční měnič (opens in a new tab)

  8. Magamp post-regulator applied to a quasi-resonant converter and magamp operation under extreme load condition in a PWM converter

    … such as shutdown of output, foldback of output current and very light load (discontinuous operation). The other issue considered concerns with magamp post regulation for a quasi-resonant converter. A magamp circuit is proposed, designed and tested for a zero current switching quasi-resonant …

    vt Repository record for Magamp post-regulator applied to a quasi-resonant converter and magamp operation under extreme load condition in a PWM converter (opens in a new tab)

  9. Series connection of multiple MOSFETs using ZCZV commutation

    … of multiple MOSFETs using an improved Zero Current Zero Voltage (ZCZV) commutation cell in high power PWM DC-DC boost converter is introduced. It provides Zero Current Switching (ZCS) and Zero Voltage Switching (ZVS) simultaneously, at both turn on and turn-off of the main switches. …

    nus Repository record for Series connection of multiple MOSFETs using ZCZV commutation (opens in a new tab) Download file for Series connection of multiple MOSFETs using ZCZV commutation (opens in a new tab)

  10. Controlling the Vienna rectifier using a simplified space vector pulse width modulation technique

    … to reduce the computational burden, the switching losses and the Total-Harmonic-Distortion (THD). Furthermore, the robustness of this modulation technique is tested under various faults through a 70 kW MATLAB/Simulink model and the results are validated through 1.2 kW prototype. The …

    uoit Repository record for Controlling the Vienna rectifier using a simplified space vector pulse width modulation technique (opens in a new tab)

  11. ANALYSIS AND DESIGN OF IMPULSE COMMUTATED SOFT-SWITCHING CURRENT-FED CONVERTERS

    In renewable energy applications, current-fed dc/dc converters with low input current ripple are viable alternatives for voltage-fed converters. With their innate boost nature and inherent short circuit protection, these step-up converters can provide high voltage gain with lower turns ratio. The …

    nus Repository record for ANALYSIS AND DESIGN OF IMPULSE COMMUTATED SOFT-SWITCHING CURRENT-FED CONVERTERS (opens in a new tab) Download file for ANALYSIS AND DESIGN OF IMPULSE COMMUTATED SOFT-SWITCHING CURRENT-FED CONVERTERS (opens in a new tab)

  12. Analysis and design of high power density resonant switched-capacitor converters

    … A single inductor is utilized to achieve zero current switching of all transistors, which allows for high switching frequency and high conversion efficiency. A split-phase control scheme is used in order to eliminate the current transients associated with the Dickson SC converter and the …

    uiuc Repository record for Analysis and design of high power density resonant switched-capacitor converters (opens in a new tab)

  13. LLC Resonant Converter Based Single-stage Inverter with Multi-resonant Branches

    … converter can achieve high efficiency and soft-switching performance. Since the dc gain curve of the single-resonant LLC converter is flat when the switching frequency is larger than the resonant frequency, namely fs>fr, an additional L-C series resonant branch is paralleled to the original …

    vt Repository record for LLC Resonant Converter Based Single-stage Inverter with Multi-resonant Branches (opens in a new tab)

  14. Topology and analysis in power conversion and inversion

    … dc-to-ac inverters are discussed. A number of zero-current switching quasi-resonant inverter topologies are derived. Schemes that permit these topologies to handle reactive loads are identified.

    vt Repository record for Topology and analysis in power conversion and inversion (opens in a new tab)

  15. Indirect matrix converter based single stage high frequency link PWM AC/AC converter with source based commutation of leakage energy

    … energy which results in power loss, reduction in switching frequency, distortion and loss of output voltage. The topology based on the indirect modulation of matrix converters uses minimum amount of copper and has relatively less number of semiconductor switches. This thesis presents a lossless …

    umn Repository record for Indirect matrix converter based single stage high frequency link PWM AC/AC converter with source based commutation of leakage energy (opens in a new tab)

  16. High-frequency quasi-resonant converter techniques

    … techniques to reduce or eliminate the switching stresses and switching losses in switching-mode power conversion circuits are developed: the zero-current switching technique and the zero-voltage switching technique. Based on these two techniques two new families of quasi-resonant …

    vt Repository record for High-frequency quasi-resonant converter techniques (opens in a new tab)

  17. A Novel Auxiliary Resonant Snubber Inverter Using Wide Bandgap Devices

    … wide bandgap (WBG) device technology and high switching frequency to reduce passive filter size thus further shrink overall space. While still maintaining decent power conversion efficiency and low electromagnetic interference (EMI) with higher switching frequency, soft-switching needs to be …

    vt Repository record for A Novel Auxiliary Resonant Snubber Inverter Using Wide Bandgap Devices (opens in a new tab)

  18. Design and Analysis of an Isolated Resonant Pulsed DC-DC Buck-Boost Converter

    … a new isolated DC-DC buck-boost converter with Zero-Current-Switching (ZCS) operation, continuous input current, and a low-side switch to simplify driving requirements. The proposed converter was designed to regulate a 5V output from an input range of 15V-18V, at a rated output power of 20W, and …

    calpoly Repository record for Design and Analysis of an Isolated Resonant Pulsed DC-DC Buck-Boost Converter (opens in a new tab)

  19. Low-Frequency Series Loaded Resonant Inverter Characterization

    … systems. Resonant inverter topologies exhibit zero current switching (ZCS); hence, eliminate switching losses leading to higher efficiencies in comparison to hard switched topologies. Resonant inverters suffer severe limitations mainly attributed to a load dependent resonant frequency. Recent …

    calpoly Repository record for Low-Frequency Series Loaded Resonant Inverter Characterization (opens in a new tab)

Page 1 of 4